Blade 350 QX2 QX3 GB200 Brushless Gimbal for AP

This is the Blade GB 200 Brushless Gimbal with mounting adapters for GoPro Hero3, Hero3+, Hero4 Black, Hero4 Silver, and C-GO1 cameras. This is a direct replacement for the Blade 350 QX2 AP combo, and will bolt right on the Blade 350 QX, QX2, and QX3 versions. Tall landing gear are required for ground clearance.

The GB200 features two gimbal modes, Angle Mode and Velocity Mode. In Angle Mode, the gimbal pitch angle corresponds directly to the position of the transmitter control input. The gimbal will automatically stabilize in the stopped position.

In Velocity Mode, the gimbal pitch angle moves away from neutral in the direction of transmitter control input. The further away from center the control input is, the faster the gimbal moves in the corresponding direction. The pitch angle movement is stopped by centering the transmitter control. The gimbal will automatically stabilize in the stopped position.

Using a 7-channel radio system, you can use channel 7 on a dial, slider, or lever to control the pitch of the gimbal. With an 8-channel radio, channel 8 can be used to switch between Angle Mode and Velocity Mode.