Traxxas E-Maxx Parts List
The Traxxas E-Maxx takes RC monster truck thrashing to another level with its powerful motor system. Available with a 16.8V brushed, or a 22.2V brushless power system for use with up to 6S LiPo, the Traxxas E-Maxx trucks have the potential to deliver endless amounts of fun for kids and adults. The E-Maxx is built to sustain all kinds of terrain. Equipped with sturdy waterproof electronics, you can drive the Traxxas E-Maxx wherever you want! From water and snow to mud and dirt, this monster truck blazes through all conditions without slowing down. Even without any additional E-Maxx 4x4 upgrades, this truck's transmission is able to sustain over 2x more torque than original models!
Want to improve the performance of your truck even more? Shop our wide variety of Traxxas E-Maxx parts to find your desired upgrades. Whether you need replacement batteries, shock kits or new tires, RC Superstore has an extensive supply of Traxxas E-Maxx brushless upgrades! Put in your order today!
-
TRA5143RTraxxas Red Aluminum 124mm Rear Toe Link Tubes: T-Maxx 3.3, E-Maxx
These are the Traxxas Tubes Lightweight Red Aluminum Turnbuckles for the Traxxas T-Maxx 3.3, E-Maxx 16.8V, and E-Maxx Brushless trucks.FEATURES: 30% lighter than stock steel toe links 4 times stiffer and more than double the strength of aftermarket...$2295 -
TRA2742X
Traxxas Rod Ends & Hollow Balls (6)
This is Traxxas Rod Ends Short Hollow Balls Set of six short rod ends with hollow ball connectors Replacement Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLBanditBIGFOOT No. 1 Officially Licensed ReplicaChevrolet Corvette StingrayDrag...$4 -
TRA3924
Traxxas Waterproof Sealed Receiver Box w/Hardware
This is the Traxxas Waterproof Sealed Receiver Box with Hardware for vehicles like the E-Maxx Brushless, Slash 4x4, and Blast boats.FitsBlastE-MaxxE-Maxx BrushlessSlash 4x4Slash 4x4 PlatinumSlash 4x4 Ultimate$12 -
TRA3977R
Traxxas E-Maxx Gear Cover for Single Motor Installation
This is the Traxxas E-Maxx Gear Cover for Single Motor Installation. This works on the E-Maxx 16.8V and E-Maxx Brushless when running a single motor and the 3997X single motor plate.$450 -
TRA5453
Traxxas Stub Axle Yokes w/Pins: T-Maxx 3.3, Revo, Slayer, E-Maxx 3905
This is a pair of Traxxas Drive Yokes for the Revo, T-Maxx 3.3, E-Maxx 3905 and others. These yokes attach to the half shaft assemblies. Features: Black plastic construction Includes:Two yokesTwo drive pins$4 -
TRA2554
Traxxas Engine Backplate Screws (6): TRX 2.5, 2.5R, 3.3
These are 3x5mm Backplate screws for the Traxxas 2.5, 2.5R, and 3.3 engines. 3x6 mm cap-head machine screws with hex drive heads. Features: Black steel construction Includes: Six black steel cap head screws Specifications:Length: 5mmDiameter:...$250 -
TRA5450
Traxxas Half Shaft Set: T-Maxx 3.3, Revo & E-Maxx
This is the Traxxas Half Shaft Set: T-Maxx 3.3, Revo & E-Maxx. Overview Half shaft set: left or right (plastic parts only) (internal splined half shaft, external splined half shaft, rubber boot) (assembled with glued boot) (2 assemblies)$750 -
RPM80772
RPM 3-Piece Skid Plate Set (Black) T-Maxx 3.3, E-Maxx 16.8V & Brushless
This is the RPM 3-Piece Skid Plate Set (Black) for the Traxxas T-Maxx 3.3, E-Maxx 16.8V, and E-Maxx Brushless trucks. This includes a front, center, and rear skid plate. Overview The extended chassis rails of the newer versions of both the T-Maxx and...$1599 -
TRA3996X
Traxxas 20-Tooth Idler Gear & Shaft E-Maxx E-Revo Summit
This is the Traxxas 20-Tooth Idler Gear and Shaft for the E-Maxx, E-Maxx Brushless, 1/10 E-Revo, 1/10 E-Revo Brushless, and 1/10 Summit trucks.IncludesOne 20 Tooth Idler GearOne 5x18mm Idler Gear ShaftSpecificationsOutside Diameter: .86" (22mm)Inside...$550 -
TRA4928X
Traxxas Output Yokes: E-Maxx, T-Maxx .15, 2.5, 3.3
These are the optional Traxxas Differential Output Yokes for the E-Maxx, T-Maxx .15, 2.5, and 3.3 trucks. FEATURES: Features thicker plastic for long life and durability These diff yokes are more rigid than the stock yokes Black in color INCLUDES:Two...$5 -
TRA4944
Traxxas Aluminum Bellcrank Posts: T-Maxx, E-Maxx
This is a pair of Traxxas Aluminum Bellcrank Posts for the T-Maxx and E-Maxx trucks. These bellcrank posts hold the steering bellcranks to the chassis. The link connects the steering bellcrank to the servo saver. Features: Stock aluminum...$7 -
TRA3159
Traxxas 3x10mm Hex Screws (6)
These are Traxxas 3x10mm Hex Screws (6). Features: Steel construction cap head with hexagon socket drive insert Metal lock washers Includes:(6) Screws(6) Lock Washers(1) Hex Wrench Specifications:Screws:Diameter: 3mmLength: 10mm Lock Washers:Inner...$275 -
TRA3927X
Traxxas E-Maxx 16.8V Battery Hold Downs (2): Fits packs up to 28mm tall
This is the optional Extended Battery Hold Down Set for the Traxxas E-Maxx Series. FEATURES:Composite nylon construction, black in colorInstall one way and you can secure battery packs up to 21mm in height flip it over and install for battery packs up...$6 -
RRP8717
Robinson Extra Hard 5mm Bore 17T Pinion 0.8 Mod (31.75P)
This is the Robinson Racing Extra Hard 17-Tooth 0.8 Mod (31.75P) Pitch Pinion Gear with a 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless,...$849 -
TRA6540
Traxxas Telemetry Trigger Magnet
This is the Traxxas Telemetry Trigger Magnet for the Traxxas TQi Telemetry System. Replacement 5x2 mm telemetry trigger magnet.IncludesOne Telemetry Trigger Magnet for the Traxxas TQi Telemetry SystemSpecifications5mm x 2mm round magnet Replacement Part...$2 -
HRATD8100X06
Hot Racing Aluminum 100mm HD Big Bore Shock Set for T-Maxx & E-Maxx
This is the Hot Racing Aluminum 100mm HD Big Bore Shock Set with eight shocks for the Traxxas T-Maxx 2.5, T-Maxx 3.3, E-Maxx 16.8V, and E-Maxx Brushless trucks. These can also be used with other shocks requiring 100mm shocks.FEATURES:- CNC machined...$9888 -
TRA2586
Traxxas 3x15mm Cap-Head Hex Machine Screws (6)
These are the Traxxas 3x15mm Cap-Head Hex Machine Screws. Each package includes six screws. These are used as head bolts on TRX 2.5 engines, and also on other areas of many vehicles.Replacement part for these modelsBandit VXLDrag Slash 1967 Chevrolet C10...$250 -
RRP8715
Robinson Extra Hard 5mm Bore 15T Pinion 0.8 Mod (31.75P)
This is the Robinson Racing Extra Hard 15-Tooth 0.8 Mod (31.75P) Pitch Pinion Gear with a 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless,...$849 -
TRA4973
Traxxas Maxx Tires for 3.8" T-Maxx/E-Maxx/Revo Wheels
These are the Traxxas Maxx Tires with Foam Inserts for 3.8" T-Maxx/E-Maxx/Revo Wheels. These will fit 3.8" wheels with the Traxxas bead.Outside Diameter: 6.3"Includes: Two tires with foam insertsRequires:Installing on 3.8" wheels Replacement part...$2795 -
RPM80892
RPM Center Skid Plate for Traxxas T-Maxx 3.3, E-Maxx 16.8V & Brushless
This is the RPM Black Center Skid Plate for the Traxxas T-Maxx 3.3, E-Maxx 16.8V, and E-Maxx Brushless trucksFits: T-Maxx 3.3 (4907 & 4908 only - see bottom for version identification), E-Maxx 16.8V, E-Maxx BrushlessRPM designers carefully...$719 -
TRA5129
Traxxas Steel Driveshaft Rebuild Kit: Revo, T-Maxx 3.3, E-Maxx
This is the Traxxas Driveshaft Rebuild Kit for the Revo, T-Maxx 3.3, and E-Maxx vehicles that have been upgraded with the aftermarket Traxxas steel driveshaft set (part TRA5451R). These are replacement parts for the TRA5451R.Rebuild kit for Revo/Maxx...$7 -
TRA2545
Traxxas Bellcrank Bushings: Nitro Rustler, T-Maxx, Slayer
This is the Traxxas Bellcrank Bushings (Plastic) set (5x8x2.5mm) (4) Includes: Set of four 5x8x2.5 mm bellcrank bushings$3 -
TRA5334
Traxxas Axle Carriers: T-Maxx 3.3, Revo, E-Maxx 3905
This is a set of Traxxas Axle Carriers and Steering Blocks for the Traxxas Revo, T-Maxx 3.3, and E-Maxx 3905. The axle carriers and steering blocks support the stub axles and bolt to the upper and lower suspension arms at each wheel...$8 -
TRA4917R
Traxxas Shock Tower for Rectangular Body Posts: T-Maxx 3.3, E-Maxx
This is a Traxxas Shock Tower for the all versions of the T-Maxx and E-Maxx. This is for use with rectangular body posts. Features: Plastic construction Includes:(1) Shock Tower Specifications:Width: 4.15" (105.5mm)Height: 2.3" (58.5mm)Thickness: 0...$5 -
TRA5143
Traxxas Rear Turnbuckles/Toe Links T-Maxx 3.3 & E-Maxx
These are the Rear Turnbuckles/Toe Links for the Traxxas 3.3 T-Maxx & E-Maxx X FEATURES Constructed of steel, polished natural finish INCLUDESTwo Rear Turnbuckles/Toe Links for the Traxxas 3.3 T-Maxx REQUIRESInstalling between wheel hubs and...$10 -
TRA5141
Traxxas Turnbuckles/Toe Links, Front T-Maxx 3.3 & E-Maxx
These are the Front Turnbuckles/Toe Links for the Traxxas 3.3 T-Maxx FEATURES Constructed of steel, polished natural finish INCLUDESTwo Front Turnbuckles/Toe Links for the Traxxas 3.3 T-Maxx REQUIRESInstalling between wheel hubs and front...$10 -
TRA4954X
Traxxas 14mm Blue Aluminum Hex Wheel Hubs: T-Maxx .15, 2.5, 3.3, E-Maxx, Revo
These are Aluminum Hex Wheel Hubs for the T-Maxx and E-Maxx Truck Kits. FEATURES:Blue anodized.Machined 6061 T-6 aluminum construction.Packaged in foam, on a bubble sealed header card. INCLUDES:Four Hex Wheel HubsFour 2.5 x 10mm Axle...$20 -
HRACSG32X13
Hot Racing Short 13-Tooth 32P Hardened Steel 1/8 Bore Pinion Gear
This is the Hot Racing Short 13-Tooth 32-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit a wide variety of vehicles, including the Traxxas 1/10 E-Revo, E-Maxx, 1/10 Rally, Slash 4x4, and Stampede 4x4 XL-5, and Stampede 4x4 VXL trucks...$788 -
TRA5174R
Traxxas Talon Tires & 3.8" Chrome Wheels for Maxx/Revo w/17mm Splined
This is a pair of Traxxas Talon Tires with Foam Inserts, Pre-Mounted on 3.8" Chrome Wheels with 17mm Splined Hex Hubs. These can be used on 1/10 E-Revos, Revo 3.3, E-Maxx, T-Maxx, and Summit trucks using 17mm Splined Hexes.Features Plastic chrome...$3395 -
TRA3965
Traxxas Cap Head Machine Screws 2.5x8mm (6)
These are Traxxas 2.5x8mm Cap Head Screws (6). Features: Steel construction Black in color Cap head design Includes: (6) 2.5x8mm cap head screws Specifications:Length: 5/16" (8mm)Diameter: 3/32" (2.5mm)$250 -
TRA3978
Traxxas Carrier Differential Heavy Duty : Revo & E-Maxx
This is the Carrier Differential for the Traxxas Revo and E-Maxx. FEATURES Replaces worn diff carriers gaskets and spacers INCLUDESDiff Carrier and GasketsSteel Spider Gear Braces (not used with Revo)Instruction sheet REQUIRESDisassembly of...$425 -
TRA3960
Traxxas 65T Spur Gear: E-Maxx
This is the optional .8 Metric Pitch 65 Tooth Spur Gear for the Traxxas E-Maxx. FEATURES:Nylon construction, black in color.8 metric pitch INCLUDES:One 65T 0.8 metric pitch spur gear REQUIRES:Installation on the vehicle SPECS:Diameter: 2.12"...$3 -
TRA4937
Front Skidplate: Maxx Trucks
This is the Front Skidplate for the Traxxas T-Maxx Monster Truck. This skidplate bolts to the Chassis (key #4922) and the Bulkheads key #4930 and provides protection to the front differential. FEATURES:Skidplate is constructed of high impact molded black...$6 -
TRA2968
Traxxas LiPo Cell Voltage Checker/Balancer
This is the Traxxas LiPo cell voltage checker/balancer. This voltage checker and balancer requires the #2938X adapter if you are using it with Traxxas iD batteries.Use the LiPo battery checker to view individual LiPo cell voltages and overall...$2495 -
TRA5353G
Traxxas 17mm Splined Green Aluminum Wheel Hubs, Nuts & Screw Pins (4)
These are the Traxxas 17mm Splined Green Aluminum Wheel Hubs, Nuts, & Screw Pins for the 1/10 E-Revo, E-Maxx, Summit, T-Maxx, and Revo 3.3 trucks. These allow you to run wheels with a 17mm hex size.Features:Aluminum construction, green anodized in...$2195 -
TRA4859
Traxxas 3x10mm Flat-Head Hex Machine Screws (4)
This is a set of four Traxxas 3x10mm Flat-Head Hex Drive Machine Screws. Set of four 3x10 mm flat-head machine screws with hex drive headsReplacement Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisChevrolet Corvette StingrayDrag SlashFactory Five...$175 -
TRA2656T
Traxxas XX-Long Ti-Ni Hardened Steel Shock Shafts (2)
These are the Traxxas XX-Long Titanium-Nitride Coated Hardened Steel Shock Shafts. Each package includes two shocks shafts. These XX-long hardened steel shafts have a super tough titanium nitride coating with a micro-polished finish for smoother...$10 -
TRA2565
Traxxas 3x18mm Roundhead Machine Screws (6)
These are the Traxxas 3x18mm Roundhead Machine Screws. Each package contains six screws.FitsE-MaxxE-Maxx BrushlessNitro Slash$150 -
TRA2537
Traxxas Threaded Rods (20/25/44mm) & 12mm Set Screw
This is a set of Traxxas Threaded Rods (20mm, 25mm, & 44mm), and a 12mm Set Screw.Includes20mm Threaded Rod25mm Threaded Rod44mm Threaded Rod12mm Set Screw Replacement Part ForBandit VXLBanditBIGFOOT No. 1 Officially Licensed ReplicaFord F-150 Raptor...$250 -
TRA6556
Traxxas Telemetry Expander Mount: T-Maxx, E-Maxx, Revo 3.3, E-Revo, Summit, XO-1
This is the Traxxas Telemetry Expander Mount 6556 for the XO-1, E-Revo*, Summit*, T-Maxx, E-Maxx, Revo 3.3, and Slayer Pro trucks. This part makes it possible to mount the #6550 Telemetry Expander Module on these vehicles.*NOTE: The E-Revo and Summit...$10
