Jato 4x4 VXL

This is Silicone grease that is used throughout most all of the Traxxas kits, it can also be used in most any R/C greasing application.  (1- tube of grease approximately 1 oz.)

This is the Traxxas Battery hold-down, tall (1)/ hold-down retainer, front & rear (1 each) (allows for installation of taller, multi-cell batteries)Extended battery hold-down with front and rear retainers accommodates taller batteries on vehicles...

This is the Diff Carrier/Gasket Set Replacement differential carrier includes X-ring gaskets (2), ring gear gasket, and 6x10x0.5 mm washer. FEATURES:Plastic Diff CarrierBlue Rubber Shaft GasketsBlack Rubber Diff Carrier GasketsGray Teflon...

This is the Diff Oil Kit for the Revo by Traxxas. Traxxas performance differential oils make it easy to increase or decrease the limited slip action of the gear differential by using higher or lower viscosity oil. Depending on the track conditions,...

This is a Tube of White Lithium Grease from Traxxas. This product can be used to lubricate parts, such as gears. FEATURES Great lubrication for nylon gears INCLUDESOne tube of lithium grease (volume unknown) REQUIRESApplication to parts needing...

This is the Traxxas Front 37T Differential Ring and 13T Pinion Gear 37-tooth ring and 13-tooth pinion gears for front differentials. Replacement Part ForFord Fiesta ST RallyFord F-150 Raptor R 4X4Ford Fiesta ST Rally BrushlessFord Fiesta ST RallyHoss 4X4...

This is the Traxxas Differential ring gear, pinion gear, (machined spiral cut) (rear) Spiral-cut 37-tooth ring and 13-tooth pinion differential gear sets are CNC-machined from a solid block of steel. The teeth are cut with a slight curve to minimize...

This is a set of four Traxxas 17mm Splined Serrated red-aluminum Wheel Nuts for use on the X-Maxx and E-Revo 2.0 monster trucks. Set of four 17 mm wheel nuts are serrated for extra bite on the wheel to keep them snug no matter how intense the action gets...

This is a package of six 3x6mm Traxxas Button Head Screws. Features: Steel construction Black in color Used on the Traxxas Revo monster truck, can also be used in any application where a 3x6mm button head screw is required Includes: Six...

This is a set of four Traxxas 17mm Splined Serrated orange-aluminum Wheel Nuts for use on the X-Maxx and E-Revo 2.0 monster trucks. Set of four 17 mm wheel nuts are serrated for extra bite on the wheel to keep them snug no matter how intense the action...

This is the Traxxas Differential, rear (complete with pinion gear and differential plastics) (fits 1/10-scale Rally & 4X4 VXL models: Slash, Stampede, Rustler) (13/37 ratio)The Pro-BUILT 4X4 rear differential comes professionally assembled for easy...

This is the Traxxas Differential, front (complete with pinion gear and differential plastics) (fits 1/10-scale Rally & 4X4 VXL models: Slash, Stampede, Rustler) (13/37 ratio)The Pro-BUILT 4X4 front differential comes professionally assembled for easy...

This is the Traxxas Complete Transmission for 1/10 2WD Rustler, Bandit, Stampede, and Slash trucks.  This comes pre-assembled with internal gears, slipper clutch, and spur gears, making for an ultra-simply swap to get you back out racing or bashing...

This is the Traxxas Rear Ring and Pinion Differential Gears for the Slash 4x4, Hoss 4x4, Stampede 4x4, Telluride, 1/10 Rally, and XO-1 vehicles. 37-tooth ring and 13-tooth pinion gears for rear differentials Includes:One Rear Differential Ring GearOne...

This is the Traxxas Differential Gear Set for the Slash 4x4, Stampede 4x4, 1/10 Rally, XO-1, and Telluride vehicles. These feature hardened steel construction.INCLUDES:Two Output GearsTwo Spider GearsOne Spider Gear ShaftOne Carrier Support Replacement...

This is the Traxxas Machined Spiral Cut Front Differential Ring and Pinion Gear. These are used as an upgrade over the 5379X gears found in many vehicles. Spiral-cut 37-tooth ring and 13-tooth pinion front differential gear sets are CNC-machined from a...

These are the 3x6mm Flathead Machine Screws from Traxxas.FeaturesSteel constructionBlack in colorIncludesSix 3x6mm Flathead Machine ScrewsSpecificationsLength: 6mmDiameter: 3mm

This is the Front Differential Housing for the Traxxas Slash 4x4. FEATURES Hardened plastic construction Black in color INCLUDESTwo front differential housing halves REQUIRESInstallation around assembled differential components

This is a set of four Traxxas 17mm Splined Serrated Green Aluminum Wheel Nuts for use on the X-Maxx and E-Revo 2.0 monster trucks. Set of four 17 mm wheel nuts are serrated for extra bite on the wheel to keep them snug no matter how intense the action...

This is a set of Traxxas Rear Differential Housings for the Slash 4x4, Stampede 4x4, 1/10 Rally, Telluride, and the XO-1 carsIncludes: Two rear differential housing halves  

These are 3x5mm Backplate screws for the Traxxas 2.5, 2.5R, and 3.3 engines. 3x6 mm cap-head machine screws with hex drive heads. Features: Black steel construction Includes: Six black steel cap head screws Specifications:Length: 5mmDiameter:...

This is the Traxxas Center Driveshaft 6061-T6 aluminum (red-anodized) (214mm) Traxxas designed this one-piece driveshaft out of tough 6061-T6 aluminum to be both strong and lightweight. Internal splines fit directly onto the input shafts of the front and...

This is the Traxxas Orange Motor Plate This brightly-anodized aluminum motor plate keeps your motor tight during intense high-flying action with a touch of style. Replacement Part ForJato 4X4 VXL Accessory Part ForJato 4X4 BrushlessJato 4X4 VXLRustler...

This is the Traxxas Motor Plate This brightly-anodized aluminum motor plate keeps your motor tight during intense high-flying action with a touch of style. Replacement Part ForFord Fiesta ST RallyFord Fiesta ST Rally BrushlessFord Fiesta ST RallyJato 4X4...

This is a set of four Traxxas 17mm Splined Serrated Blue Aluminum Wheel Nuts for use on the X-Maxx and E-Revo 2.0 monster trucks. Set of four 17 mm wheel nuts are serrated for extra bite on the wheel to keep them snug no matter how intense the action...

This is the Traxxas Extreme Heavy Duty Rear Driveshaft Assembly w/ HardwareReplacement rear driveshaft for the Extreme Heavy Duty Upgrade Kit. *Driveshafts are for use with the 9080 upgrade kit only and will not fit standard suspension parts.Fully...

This is the Traxxas Extreme Heavy Duty Front Driveshaft Assembly w/ HardwareReplacement front driveshaft for the Extreme Heavy Duty Upgrade Kit. Driveshafts are for use with the 9080 upgrade kit only and will not fit standard suspension parts. Fully...

This is the Traxxas Differential output yoke assembly, extreme heavy duty (2) (left or right, front or rear) (assembled with external-splined half shaft) (for use with #9080 upgrade kit)Replacement differential output yokes for the 9080-series Extreme...

This is the Traxxas Extreme Heavy Duty Front Outer Stub Axle Assembly (1).  Left or Right - Assembled with internal-splined half shaft.Replacement front outer stub axle for the Extreme Heavy Duty Upgrade Kit. Stub axles are designed to fit the 9080...

This is the Traxxas Wing/ wing washer/ 4x12mm FCS (2)Give your Sledge or Jato 4X4 a bold new look with a colorful wing. Available in several eye-catching colors, the high-downforce rear wing includes the wing washer and 4x12 mm attachment screws (2)...

This is the Traxxas Wing/ wing washer (blue)/ 4x12mm FCS (2) Give your Sledge or Jato 4X4 a bold new look with a colorful wing. Available in several eye-catching colors, the high-downforce rear wing includes the wing washer and 4x12 mm attachment screws...

This is the Traxxas Wing/ wing washer (orange)/ 4x12mm FCS (2)Give your Sledge or Jato 4X4 a bold new look with a colorful wing. Available in several eye-catching colors, the high-downforce rear wing includes the wing washer and 4x12 mm attachment screws...

This is the Traxxas Wing/ wing washer (red)/ 4x12mm FCS (2)Give your Sledge or Jato 4X4 a bold new look with a colorful wing. Available in several eye-catching colors, the high-downforce rear wing includes the wing washer and 4x12 mm attachment screws...

This is the Traxxas Wing/ wing washer (green)/ 4x12mm FCS (2)Give your Sledge or Jato 4X4 a bold new look with a colorful wing. Available in several eye-catching colors, the high-downforce rear wing includes the wing washer and 4x12 mm attachment screws...

This is the Traxxas Wing/ wing washer (white)/ 4x12mm FCS (2)Give your Sledge or Jato 4X4 a bold new look with a colorful wing. Available in several eye-catching colors, the high-downforce rear wing includes the wing washer and 4x12 mm attachment screws...

These are the Traxxas Gear adapters, fixed, Rustler 4x4Fixed gear adapters take the guesswork out of setting your gear mesh with five preset gearing positions. Place the adapter in the aluminum motor plate and insert the motor screw through the desired...

This is the Traxxas Differential Gear Set for the #6780 center diff.   Replacement spider gear set for the 6780 center differential and Drag Slash differential. Includes (4) Spider Gears(2) Spider Gear Shafts

These are the Traxxas Hardened Steel Center Differential Output Gears (2) for use in the #6780 metal center diff unit for the Rustler 4x4, Slash 4x4, and Stampede 4x4 trucks.

This is the Traxxas Housing, center differential (aluminum)/ x-ring gaskets (2)/ ring gear gasket (1)/ bushings (4)/ 5x10x0.5 PTW (1)/ 2.5x10 CCS (with threadlock) (4) Replacement aluminum housing for 6780 center differential. Includes ring gear gasket,...

This is a set of four Traxxas 17mm Splined Serrated Black Aluminum Wheel Nuts for use on the X-Maxx and E-Revo 2.0 monster trucks. Set of four 17 mm wheel nuts are serrated for extra bite on the wheel to keep them snug no matter how intense the action...