Nitro Rustler

These are the Traxxas Self-Lubricating 5x11x4mm Bushings (14). These are Traxxas part 1675.FeaturesMade of metalIncludes: 14 bushingsSpecifications: 5x11x4mmComments: These bushings would work on any vehicle using 5x11x4mm bushings. Fits1/10 Monster...

This is a pair of Traxxas 2.2" Front Lite Truck Wheels (white) for the Jato trucks, as well as the Nitro Rustler and Nitro Stampede.  These are 2.2-inches in diameter, and require 2.2" tires.  These are a smooth,...

This is the Traxxas aluminum (pink Anodized Shock Caps Shock caps, aluminum (pink-anodized) (4) (fits all Ultra Shocks)Aluminum shock caps are great way to boost the durability and style of any Traxxas vehicle equipped with Ultra Shocks. The machined...

This is the Traxxas High-Speed Needle Valve Assembly for the TRX 2.5, 2.5R, and 3.3 nitro engines. This includes the high speed need, fuel fitting, 2.5x1.15mm O-rings (2), and 5.3x7.8x.6mm crush washers (2).For use with TRX 2.5 & 3.3 engines used...

This is a set of the Traxxas Slash telescoping drive shafts (equivalent of dogbones or swing shafts). These are for use on Traxxas trucks. Includes: (6) sets of drive shafts (each set consists of an inside shaft wich slides in the outside...

These are the optional 1.5° Aluminum Rear Stub Axle Carriers from Traxxas FEATURES Machined aluminum construction Anodized blue in color INCLUDESTwo Aluminum Rear Stub Axle CarriersTwo 3x3mm Set ScrewsTwo 3x12mm Flat Phillips Head ScrewsTwo...

This is a pair of Traxxas 5x11x4mm ball bearings.  These are used in the clutch bells of many of the Traxxas vehicles. Features:Ball bearings reduce friction and last longer than bushings.Chrome steel construction.Used to upgrade from...

This is the GPM Racing Red Stainless Steel and Aluminum Rear CVD Driveshaft Set with 12mm Keyed Hexes for Traxxas 1/10 Slash 4x4, Slash 2WD, Rustler 4x4, Stampede 4x4, and 1/10 Rally VXL vehicles. These feature stainless steel axles and CVD joints, with...

These are the axle housings (or hub carriers). The housings are molded of black nylon. Included(2) Standard rear stub axle carriers Replacement Part ForFord Fiesta ST RallyHoss 4X4 VXLNitro RustlerNitro SlashRustler 4X4 VXLRustler 4X4Slash 4X4 VXLSlash...

This is the Traxxas 2056 High-Torque Waterproof Servo   High-Torque Waterproof Servo 80 oz-in torque Transit time 0.23 sec/60°   Replacement Part For Bandit BIGFOOT No. 1 Officially Licensed Replica Bigfoot Officially Licensed...

This is the GPM Racing Blue Aluminum Front Bumper for Traxxas Rustler 2WD, Stampede 2WD, Bandit and several other vehicles listed below. Made of 6061-T6 aluminum, these are durable and look great.These are replacements for Traxxas part 2735.Accessory...

This is the RPM Red Wide Front Bumper for Rustler, Stampede 2WD, Bandit, Nitro Sport, Nitro Stampede, and Nitro Rustler. On the electric versions, this works with both XL-5 brushed and VXL brushless trucks. This replaces Traxxas part TRA2735.Give your...

This is the Traxxas Engine Connecting Rod for TRX 2.5, 2.5R, and 3.3 Nitro Engines.FeaturesAluminum constructionPre-installed bushingSpecificationsLength: 37mm (1.46")Thickness: 3mm (0.12")Fits:Jato 3.3Nitro 4-TecNitro Rustler 2.5Nitro SlashRevo 2.5 & 3...

This is the GPM Racing Red Steel and Aluminum Rear CVD Driveshaft Set with 12mm Keyed Hexes for Traxxas 1/10 Slash 4x4, Slash 2WD, Rustler 4x4, Stampede 4x4, and 1/10 Rally VXL vehicles. These feature steel axles and CVD joints, with the main shaft made...

This is a pair of Traxxas 2555 Rear Suspension Arms. These are used on many vehicles, such as the Slash 2WD, Nitro Rustler, Nitro Slash, Nitro Sport, and Nitro Stampede. Standard rear suspension arms Accessory Part ForFord F-150 RaptorNitro RustlerNitro...

This is the Traxxas Pink Front Bumper for Stampede 2WD, Rustler, Bandit, and several other vehicles.Fits1/10 Monster Jam TrucksBandit VXLBandit XL-5CraniacNitro RustlerNitro SlashNitro SportNitro StampedeRustler VXLRustler XL-5SkullyStampede VXL...

This is the RPM Red Front Bulkhead for Traxxas 2WD trucks, including the Slash 2WD, Nitro Slash, Rustler, Nitro Rustler, Stampede 2WD, Skully, Craniac, Bigfoot, Nitro Stampede, and Bandit trucks and buggies.This part is a direct replacement for Traxxas...

These are the Hot Racing Black Aluminum 0-Degree Rear Hub Carriers for Slash 4x4, Stampede 4x4, 1/10 Rally, Telluride, Nitro Rustler, Nitro Slash, Nitro Sport, and Nitro Stampede.FEATURES:- CNC machined aluminum construction- Anodized Black in color-...

This is the GPM Racing Orange Stainless Steel and Aluminum Rear CVD Driveshaft Set with 12mm Keyed Hexes for Traxxas 1/10 Slash 4x4, Slash 2WD, Rustler 4x4, Stampede 4x4, and 1/10 Rally VXL vehicles. These feature stainless steel axles and CVD joints,...

This is a pair of Traxxas Terra-Spiked Tires for 2.2" wheels. These were stock on the Sledgehammer, but can be used on other vehicles with standard 2.2" truck wheels.FeaturesHard-traction rubber-type materialAlso features a tractor type tread with...

This is the GPM Racing Gunmetal Stainless Steel and Aluminum Rear CVD Driveshaft Set with 12mm Keyed Hexes for Traxxas 1/10 Slash 4x4, Slash 2WD, Rustler 4x4, Stampede 4x4, and 1/10 Rally VXL vehicles. These feature stainless steel axles and CVD joints,...

These are the Traxxas PTFE-coated washers (5x11x.5mm) for use with self-lubricating bushings.Features:Made of fiberBlack in colorWears better than metalIncludes:(6) small washers(6) large washersSpecifications:Small:Outer Diameter: 8mmInner Diameter:...

This is a package of three Air Filter Foam Inserts for the Traxxas 2.5 engine. FEATURES:Constructed of foam and pre-oiled to trap dirt INCLUDES:Three Air FIlter Inserts for the Traxxas 2.5 engine REQUIRES:Installing in air filter boot on...

This is the Traxxas Rebuild kit, steel-splined constant-velocity driveshafts (includes pins, dustboots, lube, and hardware).  Rebuild your Traxxas steel CV driveshafts with this kit. Each kit contains the pins, dust boots, grease, and hardware to...

These are the Traxxas Big Bore Shock Upper and Lower Spring Retainers and 5 different thicknesses of spring pre-load spacers, from 1mm to 8mm. Replacement Big Bore Shock retainer set features upper and lower spring retainers (2), and spring pre-load...

This is a Complete Control Box for the Easy Start 2 on the Traxxas Tmaxx. This houses the 7.2V battery for the Easy Start, and provides the start button. Also for the Tmaxx 3.3. FEATURES Black plastic construction Green motor and glow plug...

This is the GPM Racing Black Aluminum Front Bumper for Traxxas Rustler 2WD, Stampede 2WD, Bandit and several other vehicles listed below. Made of 6061-T6 aluminum, these are durable and look great.These are replacements for Traxxas part 2735.Accessory...

This is the Traxxas Curved Tip Heavy Duty Body Scissors for cutting and trimming polycarbonate RC bodies. To do a good job on a custom body, the right tools are a must. Having both a curved tip and straight tip (Traxxas part TRA3431) scissors in your...

This is the Traxxas Straight Tip Heavy Duty Body Scissors for cutting and trimming polycarbonate RC bodies. To do a good job on a custom body, the right tools are a must. Having both a straight tip and curved tip (Traxxas part TRA3432) scissors in your...

This is the RPM Green Front Bulkhead for Traxxas 2WD trucks, including the Slash 2WD, Nitro Slash, Rustler, Nitro Rustler, Stampede 2WD, Skully, Craniac, Bigfoot, Nitro Stampede, and Bandit trucks and buggies.This part is a direct replacement for Traxxas...

These are Shock Caps and Bottoms for Traxxas kits. Shock caps (2) and shock bottoms (2) for Traxxas Ultra Shocks Specifications:Diameter:Tops: 16mmBottoms: 13mm Replacement Part ForFord Fiesta ST RallyHoss 4X4 VXLNitro RustlerNitro SlashRustler 4X4...

This is the Traxxas Standard Size Body Clips (12) - Standard-duty body clips   Replacement part for1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 SummitBandit VXLBanditBIGFOOTJatoNitro RustlerRevoRustler VXLRustlerSlayer Pro 4X4Stampede...

This is the Traxxas replacement Body Washers. FEATURES Nylon construction Helps prevent the body mount hole from cracking prematurely White in color SPECSOuter Diameter: 0.87" (22mm)Inner Diameter: 0.26" (6.7mm) INCLUDESEight large body mount washers

This is a package of 5mm Flanged Nylon Locking Nuts from Traxxas. FEATURES:Constructed of steel with serrated flange area for sure gripNylon insert INCLUDES:Eight 5mm Flanged Nylon Locking Nuts REQUIRES:8mm nut drivers SPECS:Hex Size: 8mmInner Diameter:...

This is an O-Ring and Seal Set for the TRX 2.5 Engine. FEATURES Complete seal and ring set. Black, blue and red rubber construction. Brass ring installation tools. INCLUDESTwo brass ring installation tools.One blue rubber carburetor level seal.Two...

This is a Traxxas 20-Tooth Clutch Bell for the Traxxas T-Maxx .15, 2.5, 2.5R, 3.3, Revo, Jato, Nitro Rustler, and Nitro Stampede, Nitro 4-Tec.  The higher the number of teeth on your clutch bell, the higher your top speed.  The lower...

This is the GPM Racing Black Aluminum Front Bulkhead for Traxxas electric Stampede 2WD, Slash 2WD, Rustler 2WD, Bandit, Nitro Slash, Nitro Rustler, and Nitro Stampede trucks.This is a direct fit upgrade for the stock Traxxas part 2530A bulkheads...

This is the GPM Racing Orange Aluminum Front Bumper for Traxxas Rustler 2WD, Stampede 2WD, Bandit and several other vehicles listed below. Made of 6061-T6 aluminum, these are durable and look great.These are replacements for Traxxas part 2735.Accessory...

These are the Traxxas XX-Long Chrome Steel Shock Shafts. Each package includes two shock shafts. Replacement steel shock shafts with chrome finish for Traxxas long Ultra Shocks (2) Replacement Part ForBIGFOOT No. 1 Officially Licensed ReplicaFord F-150...

These are Traxxas 4mm Stainless Locking Nuts. These will fit many different Traxxas vehicles, and are a great item to keep in your toolbox.Features:Stainless steel construction.Nylon insert.Includes:Six Lock NutsSpecifications:Size: 4mm