Slayer Pro 4x4

This is a package of six Traxxas 4x16mm Button-Head Hex Machine Screws.Replacement part for these modelsMaxxRevoSlayer Pro 4X4SledgeSummitTRX-4 1972 Chevrolet Blazer High Trail EditionTRX-4 1979 Chevrolet BlazerTRX-4 1979 Ford BroncoTRX-4 Chevrolet K10...

These are the Traxxas 2x6mm Roundhead Self-Tapping Screws. Each package includes six screws.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 SummitJato 2.5Jato 3.3Revo 3.3SlayerSlayer Pro

This is the Traxxas 150cc Fuel Tank for the Revo 3.3, Slayer, and Slayer Pro TrucksFitsRevo 3.3SlayerSlayer Pro

This is a Traxxas Right Rear Suspension Arm Set for the Traxxas Slayer Pro 4x4. Features: Black plastic construction Includes: Two arms

These are Traxxas 5mm Nylon Locknuts (8). Features: Chromed steel construction Nylon inserts Includes: Eight 5mm locknuts Specifications:Thickness: 4.95mm (.195")

These are the replacement Hollow Balls and Shims for FEATURES Metal Construction Silver and Black in Color INCLUDESFour Silver Metal Hollow BallsFour Black Metal Shims REQUIRESAssembly onto Vehicle

This is the Traxxas S1 Slash Tread Racing Tires (2): Slash & Slash 4x4. Features Race-proven, soft-compound rubber improves traction and cornering grip Realistic Traxxas Short Course tread pattern Performance tuned foam inserts...

This is the Chassis Brace for the Traxxas Revo 3.3. FEATURES Constructed of 0.12" (3mm) thick 6061 T-6 aluminum Anodized blue in color INCLUDESChassis Brace and 4x16mm hex head screw REQUIRESInstalling on left side of chassis underneath engine

This is the optional Traxxas Revo Tuned Pipe with Resonator FEATURES Designed for use with the Traxxas Revo and Slayer when fitted with the TRX racing engine Dual chamber enhances mid to high RPM power ROAR legal Polished aluminum...

This is the Brake Yoke w/Pins for the Traxxas Revo. It is use on the Center/Front Driveshaft Assembly. FEATURES:Plastic Brake YokeSteel Brake Pins(each knurled on one end)Steel Screw Pins INCLUDES:One Brake YokeTwo Brake PinsOne Screw...

This is the Wing Tote 1/8 Scale Monster Truck Tote. This bag is great for protecting your expensive car or truck, and your equipment. This bag is nice and roomy, and is one of the only bags that will fit large trucks.   FeaturesMade with 600 Denier...

This is the Wing Tote 1/8 & 1/10 scale Car/Truck Tote. This bag is great for protecting your expensive car or truck, and your equipment. This bag is nice and roomy, and is one of the only bags that will fit large trucks. FeaturesMade with 600 Denier...

These are 5mm Nylon Locknuts by Traxxas. FEATURES:Blue anodized aluminum construction.Nylon inserts. INCLUDES:Four 5mm locknuts. SPECS:Thickness: 4.95mm (.195")

This is the replacement Starter Shaft for the T-MAXX 2.5 engine. FEATURES:Steel Construction INCLUDES:One shaft REQUIRES:Traxxas 2.5 T-MAXX engine SPECS:Length: 25.4 mm (1")Diameter: 18.2 mm (0.716") COMMENTS:If the oneway bearing is needed, use...

This is the replacement Recoil String for use with the Traxxas 2.5/2.5R recoil starters. FEATURES:Direct replacementNylon construction INCLUDES:One replacement recoil starter string REQUIRES:Remainder of recoil SPECS:Length:21.5"(546.10mm) COMMENTS:This...

This is a set of Cylinder Head Gaskets for the Traxxas TRX 2.5 engine. FEATURES:Copper construction.Three different thickness allow you to taylor your compression. INCLUDES:One each of the following thickness of gaskets: 0.15", 0.25" & 0.35"...

This is the Clutch Bell with Washer and E-Clip for the Revo. FEATURES:Metal constructionFive cooling holes on the face of bell (bellow the teeth) INCLUDES:One clutch bellTwo teflon washerTwo e-clip REQUIRES:This clutch bell uses different bearings than...

This is a pair of 3.8 rate (gold) Shock Springs for the Traxxas Revo. FEATURES:Red in color (small gold square indicates spring type)Metal construction INCLUDES:2 springs REQUIRES:Installation on the Revo SPECS:Length:...

This is a Green Tension Shock Spring Set for the Revo GTR Shocks. These springs are installed on the shock bodies. FEATURES:Red in colorGreen band on spring indicates 3.5 tension rating INCLUDES:Two 3.5 rear shock springs REQUIRES:Nothing.  These...

This is a Green Tension Shock Spring Set for the Revo GTR Shocks. These springs are installed on the shock bodies. FEATURES:Red in colorOrange band on spring indicates 3.2 tension rating INCLUDES:Two 3.2 rear shock springs REQUIRES:Nothing.  These...

This is the White Tension Shock Spring Set for the Revo GTR Shocks These springs are installed on the shock bodies. FEATURES:Red in colorWhite band on spring indicates 2.9 tension rating INCLUDES:Two 2.9 rear shock springs REQUIRES:Nothing.  These...

This is a Two-Speed Standard Ratio Gear Set for the Traxxas Revo transmission. These parts are located in the center transmission. FEATURES:White plastic construction INCLUDES:One 39T 2nd speed gearOne 13T/17T input gearOne screw...

This is a Two-Speed Wide Ratio Gear Set for the Traxxas Revo transmission. These parts are located in the center transmission. FEATURES:White plastic construction INCLUDES:One 38T 2nd speed gearOne 13T/18T input gearOne screw pin REQUIRES:Installation...

This is replacement Traxxas Revo Differential Housing for the front or rear of the Revo 2.5 or 3.3 truck.  These are made of durable black nylon.

This is the Engine Mount for the Traxxas Revo, TRAC71**.This mount attaches engine to chassis. FEATURES:Constructed of aluminum INCLUDES:One middle and two outer mount sections and all mounting hardware REQUIRES:Fastening sections to chassis and engine2...

This is a Traxxas Progressive 2 Rocker Arm Set for the Revo 2.5 and 3.3 trucks.  These fit TRA5319 and TRA5319X pushrods.  If you need the pushrods too, search our store for the listed part numbers.

This is a Traxxas Servo Horn Set for the Revo 2.5 and 3.3 trucks that works with non-Traxxas servos.  Included are steering and throttle servo horns to fit JR, KO, Hitec, and Airtronics servos.  You must use these when upgrading to...

This is a set of Traxxas Rear Bulkheads with Rocker Shafts for the Revo 3.3, E-Revo, E-Revo Brushless, and Slayer Pro trucks. These are stock replacements.FEATURES:Black plastic constructionRocker shafts preinstalledINCLUDES:Rear bulkhead halves(2)...

This is the Carburetor Body, Fuel Inlet Plug, and three O-Rings for the Traxxas 2.5 and 3.3 engines. FEATURES:Carb body constructed of composite material, inlet plug is aluminum, and O-rings are rubber INCLUDES:One Carburetor Body, Fuel Inlet Plug, and...