Traxxas T-Maxx 2.5 & 3.3
-
TRA2668Traxxas Spring Retainers & Spacers for Big Bore Shocks
These are the Traxxas Big Bore Shock Upper and Lower Spring Retainers and 5 different thicknesses of spring pre-load spacers, from 1mm to 8mm. Replacement Big Bore Shock retainer set features upper and lower spring retainers (2), and spring pre-load...$550 -
TRA5280
Traxxas EZ-Start 2 Complete Control Box
This is a Complete Control Box for the Easy Start 2 on the Traxxas Tmaxx. This houses the 7.2V battery for the Easy Start, and provides the start button. Also for the Tmaxx 3.3. FEATURES Black plastic construction Green motor and glow plug...$15 -
TRA5160
Aluminum Engine Mount: T-Maxx 2.5 & 3.3
This is the Aluminum Engine Mount for the Traxxas 3.3 T-Maxx. FEATURES:Replaces damaged engine mounts INCLUDES:Engine mount, eight 3x10mm socket head screws, eight flat washers and eight lock washers REQUIRES:2mm hex wrench SPECS:Length: 2.3" (57...$11 -
TRA5383
Traxxas Revo 2.5 & 3.3 Close Ratio 2-Speed Tranny Gears
This is a Two-Speed Close Ratio Gear Set for the Traxxas Revo transmission. These parts are located in the center transmission. FEATURES:White plastic construction INCLUDES:One 40T 2nd speed gearOne 13T/16T input gearOne screw pin REQUIRES:Installation...$750 -
TRA4609
Bearings (2) - 5x10mm (fits 18t TMX clutch bell)
This is a pair of Traxxas 5x10x4mm ball bearings. These are used in the clutch bells of many of the Traxxas vehicles. FeaturesThe bearings are constructed of stainless steel Includes2- Bearings Specs5x10x4mm$8 -
TRA3935A
Traxxas Black 90-Degree Body Mounting Clips (10)
This is a pack of Traxxas Black 90-Degree Angled Body Mounting Clips (10 clips). The angled design helps make it easier to remove and install them from the body posts. These can be used as clips on numerous vehicles for the body and other places...$3 -
TRA3432
Traxxas Curved Tip Body Scissors
This is the Traxxas Curved Tip Heavy Duty Body Scissors for cutting and trimming polycarbonate RC bodies. To do a good job on a custom body, the right tools are a must. Having both a curved tip and straight tip (Traxxas part TRA3431) scissors in your...$895 -
TRA3431
Traxxas Straight Tip Body Scissors
This is the Traxxas Straight Tip Heavy Duty Body Scissors for cutting and trimming polycarbonate RC bodies. To do a good job on a custom body, the right tools are a must. Having both a straight tip and curved tip (Traxxas part TRA3432) scissors in your...$895 -
TRA5672
Traxxas Paddle Tires on Geode Wheels 17mm Hex for 1/10 Revo, E-Revo, E-Maxx, T-Maxx, Summit
This is a pair of Traxxas Paddle Tires on Geode Chrome Wheels with a 17mm Splined Hex for 1/10 Revo, E-Revo, E-Maxx, T-Maxx, and Summit trucks. These are a must-have for running in mud, snow, or sand.Requires17mm splined hex hubsFits these vehicles...$5795 -
TRA5185
Traxxas Replacement Rubber Wheelie Bar Tires
This is a pair of Traxxas Replacement Wheelie Bar Rubber Tires for the Traxxas aluminum aftermarket wheel sets (part 5186 & 5186A) used on many vehicles.Includes: Two Rubber Tires for the Wheelie BarSpecificationsOuter Diameter: 1.1" (29mm)Inner...$7 -
TRA3935
Traxxas 90-Degree Body Clips (10)
These are the Traxxas 90-Degree Body Clips. These are a smaller size, typically used to hold down receiver covers, battery hold-downs, bodies on smaller trucks, etc.FeaturesMetal ConstructionSilver in ColorBent for Easy RemovalIncludesTen Bent Silver...$3 -
TRA3767
Traxxas Shock Caps & Bottoms: TMX .15, 2.5, Bandit, Rustler, Stampede
These are Shock Caps and Bottoms for Traxxas kits. Shock caps (2) and shock bottoms (2) for Traxxas Ultra Shocks Specifications:Diameter:Tops: 16mmBottoms: 13mm Replacement Part ForFord Fiesta ST RallyHoss 4X4 VXLNitro RustlerNitro SlashRustler 4X4...$3 -
TRA1834
Traxxas Standard Size Body Clips (12)
This is the Traxxas Standard Size Body Clips (12) - Standard-duty body clips Replacement part for1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 SummitBandit VXLBanditBIGFOOTJatoNitro RustlerRevoRustler VXLRustlerSlayer Pro 4X4Stampede...$2 -
TRA1815
Traxxas Body Washers
This is the Traxxas replacement Body Washers. FEATURES Nylon construction Helps prevent the body mount hole from cracking prematurely White in color SPECSOuter Diameter: 0.87" (22mm)Inner Diameter: 0.26" (6.7mm) INCLUDESEight large body mount washers$2 -
TRA5147X
Traxxas Steel 5mm Nuts (8): E-Maxx, Slayer
This is a package of 5mm Flanged Nylon Locking Nuts from Traxxas. FEATURES:Constructed of steel with serrated flange area for sure gripNylon insert INCLUDES:Eight 5mm Flanged Nylon Locking Nuts REQUIRES:8mm nut drivers SPECS:Hex Size: 8mmInner Diameter:...$350 -
TRA5348
Rod Ends for Rear Toe Link: Revo
This is a package of Traxxas Large Rod Ends for the Rear Toe Link for the Revo 2.5 and 3.3. These can be broken easily if you run your truck on anything but smooth ground. It is a good idea to have spares on hand.$2 -
TRA5247
Traxxas Carburetor O-Ring and Seal Kit: TRX 2.5
This is an O-Ring and Seal Set for the TRX 2.5 Engine. FEATURES Complete seal and ring set. Black, blue and red rubber construction. Brass ring installation tools. INCLUDESTwo brass ring installation tools.One blue rubber carburetor level seal.Two...$4 -
TRA4120
Traxxas 20T Clutch Bell: NST, TMX .15 and 2.5
This is a Traxxas 20-Tooth Clutch Bell for the Traxxas T-Maxx .15, 2.5, 2.5R, 3.3, Revo, Jato, Nitro Rustler, and Nitro Stampede, Nitro 4-Tec. The higher the number of teeth on your clutch bell, the higher your top speed. The lower...$12 -
TRA3934
Traxxas Body Clips (12)
These are Traxxas Body Clips for the Traxxas Vehicles. It is always good to have extra body clips around to keep your body securely fastened. These fit all of the .15, 2.5, and 3.3 versions of these trucks, as well as many other vehicles...$3 -
TRA4956
Traxxas Rear Tie Bar & 3x18mm Screws for T-Maxx E-Maxx
This is the Traxxas Rear Tie Bar with 3x18mm Screws for all T-Maxx and E-Maxx trucks.IncludesOne Toe Link Tie BarTwo 3x18mm Socket Head ScrewsSpecificationsLength: 45mm (1.77")Width: 9mm (0.35")Height: 5mm (0.20") FitsE-MaxxE-Maxx BrushlessS-MaxxT-Maxx...$3 -
TRA2656
Traxxas XX-Long Chrome Steel Shock Shafts (2)
These are the Traxxas XX-Long Chrome Steel Shock Shafts. Each package includes two shock shafts. Replacement steel shock shafts with chrome finish for Traxxas long Ultra Shocks (2) Replacement Part ForBIGFOOT No. 1 Officially Licensed ReplicaFord F-150...$3 -
TRA5458X
Traxxas Trans/Diff Yokes (2): T-Maxx 3.3, E-Maxx, Revo, E-Revo, Slayer
These are the Diff and Trans Drive Yokes for the Traxxas T-Maxx 3.3, E-Maxx 16.8V and E-Maxx Brushless, Revo 3.3, E-Revo and E-Revo Brushless trucks. FEATURES:Black plastic construction INCLUDES:Two drive yokesTwo 4x15mm Yoke pins REQUIRES:T-Maxx 3...$4 -
HRASLF254T
Hot Racing Aluminum 54T Slipper Spur Gear (0.8 metric pitch, compatible with 32-pitch)
This is the Hot Racing Aluminum 54T Slipper Spur Gear (0.8 metric pitch, compatible with 32-pitch) Features CNC machined 6061-T6 aluminum Direct fit replacement for vehicles with slipper clutch transmissions Hard anodized with light gunmetal...$1299 -
RPM73805
RPM T-Maxx/E-Maxx HD Rear Bumper (Blue)
This is the RPM Blue Heavy Duty Rear Bumper for the Traxxas T-Maxx 2.5, 3.3, E-Maxx 16.8V, and E-Maxx Brushless trucks. This can be used in place of Traxxas bumper part numbers TRA3926, TRA4935, and TRA4935X.If youre looking for a replacement bumper...$799 -
RPM80570
RPM Replacement Axle Carrier Bearings for Revo & T/E-Maxx
These are the RPM Replacement Axle Carrier Bearings for use with RPM axle carriers and True-Track kits for Traxxas Revo, E-Revo, T-Maxx and E-Maxx trucks.This bearing kit replaces worn out or damaged bearings from the RPM Axle Carrier set for the Traxxas...$1289 -
TRA5174
Traxxas Talon Tires & 3.8" Chrome Wheels for Maxx/Revo w/14mm Hex
This is a pair of Traxxas Talon Tires with Foam Inserts, Pre-Mounted on 3.8" Chrome Wheels with 14mm Hex Hubs. These can be used on 1/10 E-Revos, Revo 3.3, E-Maxx, and T-Maxx trucks using 14mm hexes.Features Plastic chrome 5-split spoke...$3395 -
TRA2052
Traxxas Servo Case for 2055 Servo
This is the Traxxas Servo Case for 2055 servo. This is Traxxas part number 2052.$3 -
TRA4955
Traxxas Axle Pins, 2.5x12mm
This is a set of Traxxas Axle Pins.These pins go through the stub axles on each wheel, the wheel hubs are then placed over these pins. Features: Axle pins are steel Includes: Four 2.5x12mm axle pins Replacement part for these modelsRevoSlayer...$1 -
TRA2551
Traxxas Screws, 3 x 10mm Countersunk(6)
This is a package of six 3x10mm Traxxas Countersunk Hex Head Screws. FEATURES Steel construction, Black in color Used on the Traxxas Revo monster truck, can also be used in any application where a 3x10mm countersunk screw is...$250 -
TRA5228
Traxxas Cooling Head Protector: TRX 3.3 Engines
This is the Cooling Head Protector for the Traxxas TRX 3.3 Racing Engine, TRA5407. FEATURES:Constructed of plastic, black in color INCLUDES:Cooling Head Protector and five 3x6mm screws REQUIRES:Fastening to top of cooling head SPECS:Thickness: 0.18" (4...$3 -
TRA4918X
Traxxas Blue Aluminum Steering Servo Mounts: T-Maxx .15, 2.5, 3.3
These are the Servo Mounts for the T-Maxx FEATURES:Machined Light-Weight Aluminum construction, anodized blue INCLUDES:Aluminum Servo Mounts (left and right)4 3x10 Buttonhead Cap Screws4 3x8 Buttonhead Cap Screws2 3x6 Buttonhead Cap Screws8 Metal...$20 -
TRA2070
Traxxas 2070 Digital High-Torque Ball-Bearing Servo
This is the Digital High Torque Traxxas Servo. FEATURES:Ball bearingsBlack plastic construction INCLUDES:One digital high torque ball bearing servo SPECS:Ratings such as speed and torque have not been provided by Traxxas.Length: 2.16" (55mm)Width: .78"...$3495 -
HRASJT253
Hot Racing 53-Tooth 0.8 Mod 32P Spur Gear for 1/10 E-Revo, Jato T-Maxx 3.3, Slash 4x4, Stampede 4x4
This is the Hot Racing 53-Tooth 0.8 Mod 32-Pitch Spur Gear for 1/10 E-Revo, Jato, T-Maxx 3.3, Slash 4x4, Stampede 4x4, Summit, and 1/10 Rally VXL.FEATURES:- CNC machined and lightened hardened steel construction- Black oxide coating for durability and...$2388 -
TRA5386
Traxxas 43T 1st Speed Gear for Revo 3.3, Slayer, T-Maxx 3.3
This is the Traxxas 43-Tooth 1st Speed Gear for Revo 3.3, Slayer, and T-Maxx 3.3 trucks.Includes: One 43T 1st Speed GearFitsRevo 3.3SlayerSlayer ProT-Maxx 2.5RT-Maxx 3.3$3 -
TRA5292
Traxxas TRX 3.3 Cooling Head Gaskets 0.20, 0.30, & 0.40mm
This is a set of Traxxas TRX 3.3 Cooling Head Gaskets measuring 0.20, 0.30, and 0.40mm. The stock size is 0.30mm. These will give you the ability to tune your engine for optimal performance under your conditions.Fits TRX 3.3 engines in:Nitro 4-TecNitro...$350 -
TRA5141A
Traxxas 112mm Front Black Aluminum Toe Link Tubes for E-Maxx & T-Maxx 3.3
This is a pair of Traxxas 7075-T6 Black Aluminum Front 112mm Toe Link Tubes with Rod Ends and Wrench for the T-Maxx 2.5R, 3.3, E-Maxx 16.8V, and E-Maxx Brushless trucks with the sealed pivot ball suspension. These are 30% lighter than the stock links,...$2295 -
TRA4958
Traxxas T-Maxx Fuel Tank Rebuild Kit (Cap, foam washer, o-ring, upper/lower retainers, screw, spring and screw pin)
This is the Traxxas T-Maxx 2.5 and 3.3 Fuel Tank Rebuild Kit with cap, foam washer, o-ring, upper/lower retainers, screw, spring and screw pin.IncludesOne black nylon capOne steel cap springOne 14x25mm black foam washerOne upper black nylon foam washer...$5 -
-
TRA1726A
Traxxas Black Antenna Tube w/Cap & Wire Retainer
This is the Traxxas Black Antenna Tube with Cap and Wire Retainer. These are compatible with nearly all Traxxas cars, trucks and boats. The sleek black design looks great as well.$2 -
RPM73802
RPM T-Maxx/E-Maxx HD Rear Bumper (Black)
This is the RPM Black Heavy Duty Rear Bumper for the Traxxas T-Maxx 2.5, 3.3, E-Maxx 16.8V, and E-Maxx Brushless trucks. This can be used in place of Traxxas bumper part numbers TRA3926, TRA4935, and TRA4935X.If youre looking for a replacement bumper...$799
Whether you prefer something that runs off a battery or real live fuel, you’ll love the Traxxas T-Maxx line. There’s more than enough here to keep you going for years no matter what your particular modeling interests might look like. Enough aftermarket components have been made by Traxxas for this line that you could continue to tinker with the same model for years to come. Chances are that you’d be able to seriously dominate many types of tracks with them too, which makes them a great option for hardcore racers.
T Maxx 3.3
Over time, Traxxas has been able to collect a lot of information about the various performance figures of their own vehicles. They’ve put this information to good use by taking it and redesigning countless vehicles. Modern Traxxas T-Maxx 3.3 models offer a 4WD powertrain and a TSM stability management system coupled with TQi telemetry and a number of other high-tech features that might make you feel like you’re driving a miniaturized computer as well as a truck.
In many ways, you actually are! These sophisticated pieces of equipment incorporate advanced computer technology that ensures a level of stability and drivability even when conditions start to suffer for whatever reason.
Traxxas T Maxx 2.5
You don’t want to count out the classic T Maxx 2.5 vehicle either, however, especially if you’re in the mood to drive something that features nitro power. A strong 2.4 GHz transmitter means that you’ll be able to stay in constant communication with your vehicle even if it happens to be on the other side of the track at any given time. Perhaps most importantly, these trucks are compatible with a selection of special fuels from Traxxas. consider 20 percent Nitro car and truck fuel, for instance.
This has the same name as the top fuel materials that real-world hot rods might run on and for a good reason. It’s not all that different from any other kind of nitro-based fuel, so you can expect some strong performance out of it.
Eventually, you might even want to start investing in a selection of replacement parts that can help you out in a pinch.
Traxxas T Maxx Parts
From something as simple as a set of body washers to an extremely complex part like a Bluetooth wireless module, Traxxas T Maxx cars have a wide-ranging catalog of parts that go with them. Whether you’re looking for spares to repair racing accidents or you want to be able to tinker with a vehicle until you can truly call it your own, there are plenty of options available on the market. You may want to start putting together quite a collection, which would ensure that you’d always have something on hand if a part failed on you or if you needed to do some kind of work under your model’s hood.
For more information about what kinds of vehicles and parts are currently being offered, make sure to contact RC Superstore online.