Traxxas T-Maxx 2.5 & 3.3
-
TRA4938ATraxxas Rear Skidplate: T-Maxx & E-Maxx Trucks (Grey)
This is the Rear Plastic Skidplate for the T-Maxx 3.3. FEATURES Attaches to and protects chassis and supports the rear bulkhead Skidplate is gray in color INCLUDESSkidplate and stainless steel plate REQUIRESInstalling on chassis with four 3x12mm...$6 -
TRA4914R
Traxxas Body Mount Posts: T-Maxx 3.3R
This is the Front Body Mount Posts, Rear Body Mount and four Screw Pins for the Traxxas T-Maxx 3.3R. FEATURES Constructed of plastic these posts and mount attach the body to the chassis INCLUDESTwo Front Body Mount Posts Rear Body Mount and...$6 -
TRA5159
Traxxas Receiver Box: T-Maxx 2.5R, 3.3
This is the Receiver Box for the T-Maxx 3.3. FEATURES:Holds receiver and Optidrive Shift Module in placeTwo piece, gray in color, constructed of hardened plastic INCLUDES:Receiver Box and Body Clip REQUIRES:Fastening to chassis, installing components and...$7 -
TRA2742X
Traxxas Rod Ends & Hollow Balls (6)
This is Traxxas Rod Ends Short Hollow Balls Set of six short rod ends with hollow ball connectors Replacement Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLBanditBIGFOOT No. 1 Officially Licensed ReplicaChevrolet Corvette StingrayDrag...$4 -
TRA5168
Traxxas T-Maxx Slide Carb Linkage Set (throttle link, brake link, and hardware)
This is a Traxxas T-Maxx Slide Carb Linkage Set, including the throttle link, brake link, and hardware. This works on T-Maxx 2.5 and 3.3 trucks with a slide carb.IncludesOne long linkage wire (160mm)One medium linkage wire (100mm)One short linkage wire...$6 -
TRA5252
Traxxas TRX 2.5 & 3.3 Complete Slide Carburetor
This is the Traxxas Complete Stock Replacement Carburetor for the Traxxas TRX 2.5 and TRX 3.3 Engines. A damaged carburetor will severely decrease the power of your engine. This can restore the lost power. The...$4495 -
TRA4923
Lower Chassis Braces: TMX .15, TMX 2.5, EMX
This is a Traxxas Lower Chassis Brace Set for the Traxxas T-Maxx .15, 2.5, S-Maxx, Stadium Maxx, and E-Maxx (model 3906). These are stock replacements. FEATURES:Replaces damaged chassis braces.Constructed of black plastic...$8 -
TRA5393
Traxxas Primary Shaft, 1st Speed Hub & One-Way Bearing for Revo, Slayer, T-Maxx 3.3
This is the Traxxas Primary Shaft, 1st Speed Hub, and One-Way Bearing for Revo 3.3, Slayer, and T-Maxx 3.3 trucks.IncludesOne Primary ShaftOne One-Way BearingOne Snap RingOne spacerFitsRevo 3.3SlayerSlayer ProT-Maxx 2.5RT-Maxx 3.3$2295 -
TRA5453
Traxxas Stub Axle Yokes w/Pins: T-Maxx 3.3, Revo, Slayer, E-Maxx 3905
This is a pair of Traxxas Drive Yokes for the Revo, T-Maxx 3.3, E-Maxx 3905 and others. These yokes attach to the half shaft assemblies. Features: Black plastic construction Includes:Two yokesTwo drive pins$4 -
TRA2554
Traxxas Engine Backplate Screws (6): TRX 2.5, 2.5R, 3.3
These are 3x5mm Backplate screws for the Traxxas 2.5, 2.5R, and 3.3 engines. 3x6 mm cap-head machine screws with hex drive heads. Features: Black steel construction Includes: Six black steel cap head screws Specifications:Length: 5mmDiameter:...$250 -
TRA5487
Traxxas T-Maxx 3.3 Aluminum Resonator Tuned Pipe
This is the Resonator Tuned Pipe for the Traxxas Maxx Series Trucks With TRX Racing Engines. FEATURES:Resonator aluminum tuned pipe is specifically engineered to boost performanceThe dual-chamber provides an average peak torque increase of 16% resulting...$4995 -
TRA5270R
Traxxas EZ-Start 2 Electric Starting System
This is the EZ Start 2(R) Starting System from Traxxas. This is the updated replacement for the first-generation EZ Start 2 System. It features a higher torque motor for the new 3.3 race series engines. FEATURES:Simple push-button starting for glow plug...$4995 -
TRA3769
Traxxas Spring Pre-Load Spacers
This is the Traxxas Spring Pre-Load Spacers Change the ride height on your vehicle with these spring pre-load spacers for Traxxas Ultra Shocks. Set includes the following spacers: 1 mm (2), 2 mm (2), 4 mm (2), and 8 mm (2). Replacement Part ForBandit...$4 -
TRA6536
Traxxas RPM Telemetry Sensor Mounts for Nitro Engines
These are the Traxxas Mounts for the RPM Telemetry Sensor for Nitro Engines. RPM sensor mounts allow you to mount an RPM sensor to your nitro engine. IncludesThree different plastic mountsTwo plastic spacersTwo flat washersTwo split washersTwo hex socket...$4 -
TRA4928X
Traxxas Output Yokes: E-Maxx, T-Maxx .15, 2.5, 3.3
These are the optional Traxxas Differential Output Yokes for the E-Maxx, T-Maxx .15, 2.5, and 3.3 trucks. FEATURES: Features thicker plastic for long life and durability These diff yokes are more rigid than the stock yokes Black in color INCLUDES:Two...$5 -
TRA4944
Traxxas Aluminum Bellcrank Posts: T-Maxx, E-Maxx
This is a pair of Traxxas Aluminum Bellcrank Posts for the T-Maxx and E-Maxx trucks. These bellcrank posts hold the steering bellcranks to the chassis. The link connects the steering bellcrank to the servo saver. Features: Stock aluminum...$7 -
TRA4142X
Traxxas 40mm Aluminum Flywheel for Bump Starting
This is an optional Traxxas Large Knurled Flywheel for use with Starter Boxes. Features: Large knurles to be gripped by rubber starter wheels Two pin aluminum construction Vent holes drilled to keep clutch shoes cooler Includes: One 40mm...$10 -
TRA4030
Traxxas TRX .15 Cylinder Sleeve & Piston
This is the Traxxas replacement piston and sleeve for the TRX Pro .15 engines. Features: ABC (Aluminum piston with a Brass sleeve or liner that is Chrome plated) Matched set with oil ring Includes:1 Piston1 Sleeve (liner)$3495 -
TRA3159
Traxxas 3x10mm Hex Screws (6)
These are Traxxas 3x10mm Hex Screws (6). Features: Steel construction cap head with hexagon socket drive insert Metal lock washers Includes:(6) Screws(6) Lock Washers(1) Hex Wrench Specifications:Screws:Diameter: 3mmLength: 10mm Lock Washers:Inner...$275 -
TRA3981
Traxxas Washer,Teflon 6x9,5x5 (10) Nitro Rustler
These are Teflon Washers from Traxxas. This will work on the Nitro Rustler. FEATURES Teflon washers INCLUDESTen Teflon washers REQUIRESTraxxas Nitro Rustler SPECS6x9.5x.5$125 -
TRA5366
Traxxas Transmission Input Slipper Shaft for Revo, T-Maxx 3.3, Slayer
This is the Traxxas Transmission Input Slipper Shaft for the Revo 3.3, T-Maxx 3.3, and Slayer trucks.FitsRevo 3.3SlayerSlayer ProT-Maxx 2.5RT-Maxx 3.3$4 -
TRA3757R
Traxxas Red Rear Springs (2.9 rate) (2) for XXL Shocks
This is pair of Traxxas Red Rear Springs (2.9 rate) for use with XXL Ultra ShocksStock Replacement On1/10 Monster Jam TrucksCraniacT-Maxx 3.3Accessory Part For1/10 Monster Jam TrucksNitro StampedeRustler VXLRustler XL-5SkullySlash 2WDSlash 2WD Ford...$4 -
INTT4064
Integy Steel Roll Cage for Traxxas T-Maxx 3.3 (model 4907 / 4908)
This is the Integy Steel Roll Cage for Traxxas T-Maxx 3.3 model 4907 and 4908 series trucks. Add some real-world strength to your vehicle with this Steel Roll Cage add-on. The cage is welded into one piece for strength and durability. Finished in the...$3499 -
HRATD8100X06
Hot Racing Aluminum 100mm HD Big Bore Shock Set for T-Maxx & E-Maxx
This is the Hot Racing Aluminum 100mm HD Big Bore Shock Set with eight shocks for the Traxxas T-Maxx 2.5, T-Maxx 3.3, E-Maxx 16.8V, and E-Maxx Brushless trucks. These can also be used with other shocks requiring 100mm shocks.FEATURES:- CNC machined...$9888 -
TRA5181
Traxxas T-Maxx 2.5R & 3.3 Gearbox Halves w/Shift Seal Plug
This is the Traxxas replacement Transmission Gearbox Halves for the T-Maxx 2.5R and 3.3 trucks. This set includes the two gearbox halves and rubber access plug.Features Holds all gears including the 2 speed gear set and input shaft Gray in color -...$10 -
TRA5115
Traxxas 5x10x4mm Blue Rubber Sealed Ball Bearings (2)
This is a pair of Traxxas 5x10x4mm Blue Rubber-Sealed Ball Bearings. These are used on vehicles like the 1/10 E-Revo, Revo 3.3, T-Maxx, Slayer, as well as other vehicles.FeaturesMetal bearing constructionBlue rubber dirt shieldsIncludes: (2) 5X10mm ball...$350 -
TRA2586
Traxxas 3x15mm Cap-Head Hex Machine Screws (6)
These are the Traxxas 3x15mm Cap-Head Hex Machine Screws. Each package includes six screws. These are used as head bolts on TRX 2.5 engines, and also on other areas of many vehicles.Replacement part for these modelsBandit VXLDrag Slash 1967 Chevrolet C10...$250 -
TRA1994
Traxxas Slipper Tension Spring w/Spur Gear Bushing & Locknut
This is the Traxxas Slipper Tension Spring with Spur Gear Bushing and Locknut.Includes:Slipper tension spring (1)Spur gear bushing (1)4mm Locknut with nylon insert (1) FitsBandit XL-5E-MaxxNitro RustlerNitro SlashNitro SportNitro StampedeRustler...$250 -
TRA4973
Traxxas Maxx Tires for 3.8" T-Maxx/E-Maxx/Revo Wheels
These are the Traxxas Maxx Tires with Foam Inserts for 3.8" T-Maxx/E-Maxx/Revo Wheels. These will fit 3.8" wheels with the Traxxas bead.Outside Diameter: 6.3"Includes: Two tires with foam insertsRequires:Installing on 3.8" wheels Replacement part...$2795 -
TRA5129
Traxxas Steel Driveshaft Rebuild Kit: Revo, T-Maxx 3.3, E-Maxx
This is the Traxxas Driveshaft Rebuild Kit for the Revo, T-Maxx 3.3, and E-Maxx vehicles that have been upgraded with the aftermarket Traxxas steel driveshaft set (part TRA5451R). These are replacement parts for the TRA5451R.Rebuild kit for Revo/Maxx...$7 -
TRA2545
Traxxas Bellcrank Bushings: Nitro Rustler, T-Maxx, Slayer
This is the Traxxas Bellcrank Bushings (Plastic) set (5x8x2.5mm) (4) Includes: Set of four 5x8x2.5 mm bellcrank bushings$3 -
TRA5334
Traxxas Axle Carriers: T-Maxx 3.3, Revo, E-Maxx 3905
This is a set of Traxxas Axle Carriers and Steering Blocks for the Traxxas Revo, T-Maxx 3.3, and E-Maxx 3905. The axle carriers and steering blocks support the stub axles and bolt to the upper and lower suspension arms at each wheel...$8 -
TRA4917R
Traxxas Shock Tower for Rectangular Body Posts: T-Maxx 3.3, E-Maxx
This is a Traxxas Shock Tower for the all versions of the T-Maxx and E-Maxx. This is for use with rectangular body posts. Features: Plastic construction Includes:(1) Shock Tower Specifications:Width: 4.15" (105.5mm)Height: 2.3" (58.5mm)Thickness: 0...$5 -
RPM80010
RPM Pillow Ball Screw Cap Set (4): Fits T-Maxx & E-Maxx RPM Carriers
This is a set of RPM Pillow Ball Screw Caps (4) for use with the RPM Carriers on the Traxxas T-Maxx and E-Maxx trucks. Until now, the only way to replace damaged or worn out pivot ball setscrews and bushing caps was to purchase new pivot balls as well...$469 -
TRA5143
Traxxas Rear Turnbuckles/Toe Links T-Maxx 3.3 & E-Maxx
These are the Rear Turnbuckles/Toe Links for the Traxxas 3.3 T-Maxx & E-Maxx X FEATURES Constructed of steel, polished natural finish INCLUDESTwo Rear Turnbuckles/Toe Links for the Traxxas 3.3 T-Maxx REQUIRESInstalling between wheel hubs and...$10 -
TRA5141
Traxxas Turnbuckles/Toe Links, Front T-Maxx 3.3 & E-Maxx
These are the Front Turnbuckles/Toe Links for the Traxxas 3.3 T-Maxx FEATURES Constructed of steel, polished natural finish INCLUDESTwo Front Turnbuckles/Toe Links for the Traxxas 3.3 T-Maxx REQUIRESInstalling between wheel hubs and front...$10 -
TRA5345R
Traxxas Steering Servo Horns, Long(2), Short (2): Revo 3.3
These are the Steering Servo Horns and Turnbuckles from Traxxas. FEATURES:Nylon construction, black in color INCLUDES:Two long steering servo hornsTwo short steering servo hornsTwo 3x20mm turnbuckles REQUIRES:Installation on the vehicle$675 -
TRA4925X
Traxxas Battery Box (Grey): T-Maxx
This is the Battery Box for the Traxxas T-Maxx 4WD Radio Control Monster Truck. This battery box mounts to the chassis and protects the battery pack from dirt and moisture. Fits both old and new versions of the T-Maxx. FEATURES:Replaces damaged battery...$475 -
TRA4954X
Traxxas 14mm Blue Aluminum Hex Wheel Hubs: T-Maxx .15, 2.5, 3.3, E-Maxx, Revo
These are Aluminum Hex Wheel Hubs for the T-Maxx and E-Maxx Truck Kits. FEATURES:Blue anodized.Machined 6061 T-6 aluminum construction.Packaged in foam, on a bubble sealed header card. INCLUDES:Four Hex Wheel HubsFour 2.5 x 10mm Axle...$20 -
TRA4965
Brake Pads: Maxx Trucks
This is a Traxxas T-Maxx Brake Pad Set for the T-Maxx .15 and 2.5 trucks. These are stock replacements. These brake pads fit on each side of the brake disc and bolt to the rear of the transmission. FEATURES:Replaces missing or worn...$350
Whether you prefer something that runs off a battery or real live fuel, you’ll love the Traxxas T-Maxx line. There’s more than enough here to keep you going for years no matter what your particular modeling interests might look like. Enough aftermarket components have been made by Traxxas for this line that you could continue to tinker with the same model for years to come. Chances are that you’d be able to seriously dominate many types of tracks with them too, which makes them a great option for hardcore racers.
T Maxx 3.3
Over time, Traxxas has been able to collect a lot of information about the various performance figures of their own vehicles. They’ve put this information to good use by taking it and redesigning countless vehicles. Modern Traxxas T-Maxx 3.3 models offer a 4WD powertrain and a TSM stability management system coupled with TQi telemetry and a number of other high-tech features that might make you feel like you’re driving a miniaturized computer as well as a truck.
In many ways, you actually are! These sophisticated pieces of equipment incorporate advanced computer technology that ensures a level of stability and drivability even when conditions start to suffer for whatever reason.
Traxxas T Maxx 2.5
You don’t want to count out the classic T Maxx 2.5 vehicle either, however, especially if you’re in the mood to drive something that features nitro power. A strong 2.4 GHz transmitter means that you’ll be able to stay in constant communication with your vehicle even if it happens to be on the other side of the track at any given time. Perhaps most importantly, these trucks are compatible with a selection of special fuels from Traxxas. consider 20 percent Nitro car and truck fuel, for instance.
This has the same name as the top fuel materials that real-world hot rods might run on and for a good reason. It’s not all that different from any other kind of nitro-based fuel, so you can expect some strong performance out of it.
Eventually, you might even want to start investing in a selection of replacement parts that can help you out in a pinch.
Traxxas T Maxx Parts
From something as simple as a set of body washers to an extremely complex part like a Bluetooth wireless module, Traxxas T Maxx cars have a wide-ranging catalog of parts that go with them. Whether you’re looking for spares to repair racing accidents or you want to be able to tinker with a vehicle until you can truly call it your own, there are plenty of options available on the market. You may want to start putting together quite a collection, which would ensure that you’d always have something on hand if a part failed on you or if you needed to do some kind of work under your model’s hood.
For more information about what kinds of vehicles and parts are currently being offered, make sure to contact RC Superstore online.