Telluride

This is the Hot Racing Blue Aluminum Heat Sink Cooling Fan for use on 540 and 550 brushed and brushless motors in vehicles like the Traxxas Rustler XL-5 and VXL, Stampede 2WD, Stampede 4x4, Slash 2WD, Slash 4x4, and more! The versatile two-piece heat...

These are the Hot Racing Carbon Fiber Long Slipper Clutch Pads with 25% more surface area than stock pads, for use in place of Traxxas 5352 or 5552 pads. These fit Traxxas Bandit, E-Maxx, E-Revo, Jato 3.3, Rally VXL, Revo 3.3, Rustler, Slash 2WD, Slash...

This is the Hot Racing Adjustable Front and Rear Sway Bar Kit for Traxxas Slash 4x4, Stampede 4x4, 1/10 Rally VXL, and Telluride trucks.FEATURES:- Adjustable spring steel sway bar wire- A set of three sway bars for a wider range of adjustment to suit the...

This is the Hot Racing Hardened Steel 50-Tooth 0.8 Mod 32-Pitch Spur Gear for Traxxas Slash 2WD, Stampede 2WD, Rustler, Bandit, and Telluride vehicles. This gear is significantly smaller than stock, which will increase top speed over stock. It will...

These are the Hot Racing Carbon Fiber Stock Length Slipper Clutch Pads, for use in place of Traxxas 5352 or 5552 slipper pads. These fit Traxxas Bandit, E-Maxx, E-Revo, Jato 3.3, Rally VXL, Revo 3.3, Rustler, Slash 2WD, Slash 4X4, Slayer Pro 4X4,...

This is the Hot Racing Front and Rear Sway Bar Set for Traxxas Slash 4x4, Stampede 4x4, and 1/10 Rally VXL vehicles.FEATURES:Adjustable spring steel sway bar wire.YOU WILL RECEIVE:One Set of Front and rear Sway Bars WireTwo med chrome anti-roll bars.Four...

This is the Hot Racing Hardened Steel 76-Tooth 48-Pitch Spur Gear for Traxxas Slash 2WD, Stampede 2WD, Rustler, Bandit, and Telluride vehicles. It will work on XL-5 brushed and VXL brushless vehicles with proper adjustment.FEATURES:- CNC machined and...

This is the Hot Racing 12mm to 17mm Hex Hub Adapters with 10mm Offset for Traxxas Slash 4x4, Stampede 4x4, Telluride, Associated ProLite 4x4, and Losi TEN-T vehicles.These adapters are compatible with many 1/10th scale vehicles with factory 12mm hex hubs...

This is the Hot Racing 27-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:Standard 4140 steel and heat treatedHeavy duty 4mm set screw for brushless powerYOU WILL...

These are the Hot Racing Blue Aluminum 100mm HD Big Bore Rear Shocks for Slash 2WD, Slash 4x4, Stampede 2WD & 4x4, Rustler, Bandit, T-Maxx and E-Maxx front/rear, Associated SC10, and many other vehicles that can use 100mm shocks. These are also a great...

This is the Hot Racing 12mm to 17mm Hex Hub Adapters with 6mm Offset for Traxxas Slash 4x4, Stampede 4x4, Telluride, Associated ProLite 4x4, and Losi TEN-T vehicles.These adapters are compatible with many 1/10th scale vehicles with factory 12mm hex hubs...

These are the Hot Racing Black Aluminum Steering Blocks for Slash 4x4, Stampede 4x4, 1/10 Rally VXL, and Telluride trucks.FEATURES:- CNC machined aluminum- Anodized black- Machined chamfered edges- Laser etched lettering- Replaces factory stock plastic...

These are the Hot Racing Black Aluminum 0-Degree Rear Hub Carriers for Slash 4x4, Stampede 4x4, 1/10 Rally, Telluride, Nitro Rustler, Nitro Slash, Nitro Sport, and Nitro Stampede.FEATURES:- CNC machined aluminum construction- Anodized Black in color-...

These are the Hot Racing Aluminum Splined 17mm Hex 6mm Offset Hubs for the Traxxas Rally VXL, Slash 4X4, Stampede 4x4, and Telluride 4X4 vehicles. Offset from stock wheel hex is +6mm per side.FEATURES:- Black anodized CNC machined aluminum hex adapter-...

These are the Hot Racing Black Aluminum C-Hub Castor Blocks for the 1/10 Traxxas Rally VXL, Slash 4X4, Stampede 4X4, and Telluride 4X4.FEATURES:- CNC machined 6061-T6 aluminum, anodized black- Brass kingpin bushings for smooth steering- Laser etched...

This is the Hot Racing 31-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:CNC Machined light weight Precision Gears with Standard 4140 steelReduce internal rotating mass...

This is the Hot Racing Aluminum 6mm Offset 17mm Hex Hubs for the Traxxas 1/10 Rally VXL, Slash 4X4, Stampede 4x4, and Telluride 4X4 vehicles. Offset from stock wheel hex is +12mm per side.FEATURES:- Black anodized CNC machined aluminum hex adapter- Blue...

This is the Hot Racing Aluminum Center Differential Case for Slash 4x4, Stampede 4x4, 1/10 Rally VXL, and Telluride.FEATURES:- CNC 6061-T6 aluminum construction, hard anodized- Direct fit hop up requires no model modification for useINCLUDES:- One (1)...

This is the Hot Racing 32-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:CNC Machined light weight Precision Gears with Standard 4140 steelReduce internal rotating mass...

This is the Hot Racing Black 6061-T6 Aluminum Rear Shock Tower for Slash 4x4, Stampede 4x4 XL-5, and Stampede 4x4 VXL trucks.FEATURES:6061-T6 Aluminum constructionBlack anodized colorMuch stronger than stock shock towerYOU WILL RECEIVE:One Black Rear...

This is the Hot Racing Black 6061-T6 Aluminum Front Shock Tower for the Slash 4x4, Stampede 4x4 XL-5, and Stampede 4x4 VXL trucks.FEATURES:6061-T6 Aluminum CNC construction.Black anodizedMuch stronger than stock shock towerYOU WILL RECEIVE:One black...

This is the Hot Racing 26-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:Standard 4140 steel and heat treatedHeavy duty 4mm set screw for brushless powerYOU WILL...

This is the Hot Racing 28-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:Standard 4140 steel and heat treatedHeavy duty 4mm set screw for brushless powerReduced...

This is the Hot Racing Lightweight Hardened Steel 72-Tooth 48-Pitch Spur Gear for Traxxas Slash 2WD, Stampede 2WD, Rustler, Bandit, and Telluride vehicles. This will fit XL-5 brushed and VXL brushless trucks. A larger pinion gear will be required on...

These are the Hot Racing Rear Progressive Rally Spec Springs (3 Pairs) for Traxxas Slash 2WD, Slash 4x4, Stampede 2WD, Stampede 4x4, Telluride, and Rustler XL-5 and VXL trucks. These fit the stock Traxxas Ultra Shocks used on these vehicles...

This is the Hot Racing Hardened Steel 75-Tooth 48-Pitch Spur Gear for Traxxas Slash 2WD, Stampede 2WD, Rustler, Bandit, and Telluride vehicles. It will work on XL-5 brushed and VXL brushless vehicles with proper adjustment.FEATURES:- CNC machined and...

This is the Hot Racing Hardened Steel 74-Tooth 48-Pitch Spur Gear for Traxxas Slash 2WD, Stampede 2WD, Rustler, Bandit, and Telluride vehicles. It will work on XL-5 brushed and VXL brushless setups with proper gearing. Due to the gear being a smaller...

This is the Hot Racing Steel 49-Tooth 0.8 Mod 32-Pitch Center Differential Spur Gear for Slash 4x4, Stampede 4x4, 1/10 Rally VXL, and Telluride trucks equipped with a center diff. The vehicle must have the center gear differential installed, as this gear...

These are Hot Racing Rear Spring Sets (3 Pairs) for Traxxas Slash 2WD, Slash 4x4, Stampede 2WD, Stampede 4x4, Telluride, and Rustler XL-5 and VXL trucks. These fit the stock Traxxas Ultra Shocks used on these vehicles.FEATURESSpring Steel...

These are the Hot Racing Rear Progressive 2 Spring Sets (3 Pairs) for Traxxas Slash 2WD, Slash 4x4, Stampede 2WD, Stampede 4x4, Telluride, and Rustler XL-5 and VXL trucks. These fit the stock Traxxas Ultra Shocks used on these vehicles. FEATURES:Steel...

These are the Hot Racing Front Progressive Rally Spec Springs (3 Pairs) for Traxxas Slash 2WD, Slash 4x4, Stampede 2WD, Stampede 4x4, 1/10 Rally VXL, Telluride, and Rustler XL-5 and VXL trucks. These fit the stock Traxxas Ultra Shocks used on these...

These are the Hot Racing Front Spring Sets (3 Pairs) for Traxxas Slash 2WD, Slash 4x4, Stampede 2WD, Stampede 4x4, Telluride, and Rustler XL-5 and VXL trucks. These fit the stock Traxxas Ultra Shocks used on these vehicles. FEATURES:Spring Steel...

These are the Hot Racing Front Progressive 2 Spring Sets (3 Pairs) for Traxxas Slash 2WD, Slash 4x4, Stampede 2WD, Stampede 4x4, Telluride, and Rustler XL-5 and VXL trucks. These fit the stock Traxxas Ultra Shocks used on these vehicles.FEATURES:Steel...

This is the Hot Racing Black Aluminum 1.5-Degree Rear Hubs / Stub Axle Carriers for Slash 4x4, Stampede 4x4, 1/10 Rally VXL, Telluride, Nitro Rustler, Nitro Slash, Nitro Sport, and Nitro Stampede.FEATURES:- CNC machined aluminum construction- Anodized...

This is the Hot Racing Aluminum Center One-Way Differential for Traxxas Slash 4X4, Stampede 4X4, Rally VXL, and Telluride 4X4 vehicles equipped with the center gear differential.The Hot Racing center one-way differential drives the front and rear wheels...

This is the Hot Racing Aluminum 10mm Offset 17mm Hex Hubs for the Traxxas Rally VXL, Slash 4X4, Stampede 4x4, and Telluride 4X4 vehicles. Offset from stock wheel hex is +16mm per side. FEATURES:- Black anodized CNC machined aluminum hex adapter- Blue...

These are the Hot Racing Aluminum 12mm Hex Hubs with 25mm Extension for Traxxas Slash 4X4, Stampede 4X4, and 1/10 Rally VXL vehicles with 5mm diameter outer stub axles.FEATURES:- Extends the width of your buggy or truck for a wider stance and greater...

These are the Hot Racing Aluminum 12mm Hex Hubs with 28mm Extension for Traxxas Slash 4X4, Stampede 4X4, and 1/10 Rally VXL vehicles with 5mm diameter outer stub axles.FEATURES:- Extends the width of your truck for a wider stance and greater control-...

This is the Hot Racing 30-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:CNC Machined light weight Precision Gears with Standard 4140 steelReduce internal rotating mass...

This is the Hot Racing 29-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:Standard 4140 steel and heat treatedHeavy duty 4mm set screw for brushless powerReduced...