This is the Futaba 14SGA 2.4GHz Air Transmitter (Mode 2) with the R7008SB Telemetry Receiver. Futaba proudly introduces the 14SG, the only 14-channel system with revolutionary 2.4GHz FASSTest technology. It's also compatible with Futaba FASST and S-FHSS protocols, so you can fly with virtually any 2.4GHz air receiver Futaba produces.
The 14SG can transmit and receive telemetry data. Install Futaba telemetry sensors (sold separately) to monitor flight data, receive alerts while in flight and more. Heli pilots will prefer the 14SG's 3-axis gyro support - which makes the 14SG the perfect system for flybarless flight!
The innovations don't stop there. Turn the 14SG over, and you'll see the construction is as rock-solid as any other Futaba system. It's also very comfortable to use, thanks to rubber grips that help minimize flyer fatigue - an added bonus that pilots will appreciate.
The 14SG has so much to offer, we can't talk about everything here. To see everything that the 14SG can do, read on..
SYSTEM FEATURES:- 2.4GHz FASSTest technology is also compatible with Futaba FASST and S-FHSS protocols, allowing this system to be used with any 2.4GHz air receiver Futaba produces
- Transmits and receives telemetry data with Futaba telemetry sensors (not included, sold separately) to monitor flight data, receive alerts and more
- 30 model memory with 10 character model naming and 10 character user naming
- Model data can be saved to an SD card (not included, purchase separately SD:32MG-2GB, SDHC:4GB-32GB)
- Left and right assignable slider switches
- Two assignable rotary knobs
- Six assignable three-position switches
- One assignable momentary two-position switch
- One assignable two-position switch
- S.BUS2 programmability allows multiple servos, gyros and telemetry to be installed with a minimum amount of cables
- Programming port and earphone jack
- SensorTouch Programming
- One year limited warranty through Hobby Services beginning at date of purchase
Airplane Features- 7 different wing types, 3 different tail types, 2 different rudder types
- Flap setting menu
- Differential ailerons
- Aileron to camber flap mixing
- Aileron to brake flap mixing
- Aileron to rudder mixing
- Rudder to aileron mixing
- Rudder to elevator mixing
- Camber mixing
- Elevator to camber mixing
- Camber flap to elevator mixing
- Snap roll mixing
- Airbrake mixing
- V-Tail mixing
- Ailvator
- Winglet
- Motor mixing
- Fuel mixture mixing
- Gyro mixing
- Throttle curve (5-point)
- Pitch curve (5-point)
- Idle down
Helicopter Features- 6 swash plate types
- Pitch/throttle curves (5-point)
- Throttle hold
- Swash mix
- Throttle mix
- Pitch to rudder mixing
- Fuel mixture
- Gyro (Flybarless support)
- Governor (700-3500 rpm)
- Hover pitch
- Hover throttle
- High/low pitch
- Swash AFR
- Swash setting (mixing rate, linkage compensation, speed compensation)
- Swash ring (electronic)
- Throttle cut
Glider Features- 11 different wing types
- 3 different tail types
- 2 different rudder types
- Flap setting menu
- Differential ailerons
- Aileron to camber flap mixing
- Aileron to brake flap mixing
- Aileron to rudder mixing
- Rudder to aileron mixing
- Rudder to elevator mixing
- Camber mixing
- Elevator to camber mixing
- Camber flap to elevator mixing
- Butterfly mixing
- Butterfly to elevator mixing
INCLUDES: Futaba 14SG 14 Channel 2.4GHz Computer Radio System on Mode 2 with R7008SB Receiver, 6V 1800mAh NiMH Transmitter Battery, Instruction Manual, and LiFe Spacer for optional FT2F2100B/FT2F1700B battery* pack, Battery Charger, Neck Strap, and Switch Harness
SPECIFICATIONSTransmitter:
Transmitting Frequency: 2.4GHz band
System: FASSTest14CH, FASSTest12CH, FASST MULTI, FASST 7CH, S-FHSS switchable
Power Supply: 6.0V HT5F1800B NiMH battery (FUTM1482)
R7008SB Receiver (FUTL7675)
Receiving Frequency: 2.4GHz FASSTest system
Power Requirement: 3.7 - 7.4V (voltage range 3.5 - 8.4V)
Current drain: 75mA
Extra Voltage Port: 0 - 70V DC
Size: 0.98 x 1.9 x 0.56" (24.9 x 47.3 x 14.3mm)
Weight: 0.38oz (10.9g)
