This is the RPM Blue Rear Skid Plate for the Traxxas Slash 2WD trucks. Stock Traxxas bumper mounts will not work with this skid plate. This must be used with the RPM80902 or RPM80905 bumper mount if you want to retain the use of a rear bumper or wheelie bar.
Features
- Unique designs use 3 chassis mounting points instead of 2, helping spread impact energy over a larger area
- Cross-tube styling of stock plates eliminated in favor of a solid flat skid design, allowing truck to slide over obstacles
RPM rear skid plates for the Traxxas Slash 2wd are designed to eliminate the frustration of broken skid plates and chassis. When a stock rear skid plate fails, it can rip the rear shock tower mounting screws out of the chassis, causing a catastrophic failure usually resulting in the rear end sailing in a different direction than the rest of the truck. With RPM skid plates mounted, that problem will be a thing of the past!
RPM rear Slash skid plates are completely redesigned, making them stronger and much more durable. Our unique design use three chassis mounting points instead of two, triangulating the chassis mounts on the truck, in turn spreading impact energy over a larger area. This is done using a hole already located in the stock chassis, meaning no drilling is required. We also eliminated the cross-tube styling of the stock skid plates in favor of a solid flat skid design with a large radius at the transition points to allow the truck to slide over obstacles that would have normally caught on the stock rear skid plate. That means no more direct impacts to the lower rear end of the truck, which is the primary source of a broken chassis.
As a final design touch, we added four thick skid rails on both the front and rear skid plates which reduce sliding friction while improving the overall durability of the skid plates and the truck. At the tail end of the rear skid plate, a skid rail runs from side to side to protect the lower transmission screw and rear bumper mount while providing a smooth transitional surface.
Tech Notes: Stock rear bumper mounts (Traxxas #3677) will not work with RPM skid plates. To retain the use of a rear bumper or wheelie bar, RPM #80902 or #80905 must be used. RPM skid plates are designed for and only guaranteed to fit a stock Traxxas Slash 2WD chassis and chassis components.
