null

RPM Castle Sidewinder 3 & SCT Blue ESC Cage for Traxxas

  • RPM Castle Sidewinder 3 & SCT Blue ESC Cage for Traxxas
  • RPM Castle Sidewinder 3 & SCT Blue ESC Cage for Traxxas
  • RPM Castle Sidewinder 3 & SCT Blue ESC Cage for Traxxas
  • RPM Castle Sidewinder 3 & SCT Blue ESC Cage for Traxxas
$749
This item earns 7 Reward Points!
Brand:
Model: RPM73275
This is the RPM Castle Sidewinder 3 and Sidewinder SCT Blue ESC Cage for use with Traxxas vehicles like the Slash 2WD, Slash 4x4, Stampede 4x4, 1/10 Rally VXL and others (see Tech Notes for vehicle fit info).

The RPM cage allows the ESC to be run with or without a fan. It encases the ESC body only, leaving the entire ESC fan free to do its job. Furthermore, we left air channels along the sides of the ESC to allow air movement along the sides of the case, helping to keep the ESC cool.

Each ESC Cage is designed to simplify ESC installation and maintenance of the vehicle. Two screws hold the entire assembly to the chassis, that’s it! No more struggling with gooey double-sided tape to remove the ESC to clean your vehicle or transfer the electronics to another car. It’s so quick, you can transfer the entire assembly from one vehicle to the next in about a minute!

We include a separate, encased on / off switch mount that bolts directly to our cage in one of four locations / orientations for extreme versatility. Since the switch attaches to the cage, no extra time is needed to remove it during maintenance or if you decide to swap the ESC between vehicles. Alternately, you can mount the switch anywhere you’d like simply by drilling and tapping two 2mm holes.

Each RPM ESC Cage is manufactured from our ridiculously tough blend of engineering grade nylons for a lifetime of worry-free performance. Each cage is molded in blue or black and backed by our limited lifetime warranty against breakage.

Tech Notes:
The RPM ESC Cage for the Sidewinder 3 & Sidewinder SCT series ESCs works with Castle Sidewinder #010-0115-00, # 010-0115-01, # 010-0115-02, # 010-0115-03, # 010-0115-04 & # 010-0123-00. While the ESC Cage will fit a variety of applications, they have been tested and guaranteed to fit the following Traxxas vehicles in stock form only - Stampede 4x4, Slash 4x4, Slash 4x4 LCG, Slash 2wd, Slash 2wd LCG, 1/10 Rally VXL, Stampede VXL 2wd, Rustler VXL & Bandit VXL. Also fits the following vehicles as long as Traxxas #3725 Mounting Plate is used - Rustler XL-5, Stampede XL-5 2wd, Craniac, Skully, Bigfoot, & Bandit XL-5.

You May Also Like