This is the Traxxas 1/18 TRX-4m Ford Bronco 4x4 Crawler Electric Truck. Ready-to-Drive with TQ 2.4GHz 2-channel Transmitter, and ECM-2.5 Waterproof Electronics. - OPEN ITEM
This is an open box item. The box was opened/factory seals have been broken but the truck has never been run/used. It is otherwise in brand new condition. All of the Traxxas items are included. The truck will be secured properly for shipping.
This truck is Traxxas model TRA97074-1-RED. The color is RED
FORD BRONCO
TRX-4M: BIG FUN AND ADVENTURE IN A SMALLER TRX-4
Introducing TRX-4M, a new way to experience all the fun, adventure, and scale realism of the TRX-4 in a 1/18 platform. TRX-4M bridges the gap between the small crawler scene and 1/10 scale quality and performance. Oil-filled shocks, steel frame rails, and a smooth running drivetrain give it true outdoor capability over rocks and through grass and streams. The tight turning radius and precise throttle control give it fantastic indoor maneuverability.
THE RIGHT SIZE FOR FUN
TRX-4M is the perfect size to fit in a backpack for fun on the go. It’s small, powerful, and maneuverable so just about any space becomes an instant trail or crawling course. Whether it’s a mountain of books indoors or a rock garden in the backyard, TRX-4M is always ready for big fun and adventure.
ALL-TERRAIN VERSATILITY
TRX-4M is equipped to take on tough off-road terrain with grippy soft-compound tires, precision-engineered 4-link suspension geometry, and smooth oil-filled shocks. High center ground clearance, big approach angles, and low CG give the TRX-4M impressive capability everywhere it goes.
45° STEERING ANGLE
A full 45° steering angle gives TRX-4M an exceptionally tight turning radius and extreme maneuverability in small spaces where every inch counts. A heavy-duty 2065T steering servo delivers powerful steering authority, even on thick carpet.
OIL-FILLED GTM SHOCKS
TRX-4M’s oil-filled GTM shocks offer smooth suspension damping to keep the wheels firmly planted on uneven surfaces. The added control also keeps the body from bouncing around on rough terrain for a more realistic driving experience.
DETAILED ABS BODY WITH CLIPLESS MOUNTING
The innovative clipless body removes and installs in just seconds with no clips to lose or frustrating hook and loop tabs. Tough, highly detailed ABS bodies feature molded-in color with a deep glossy finish that won’t chip or scrape off.
WATERPROOF ELECTRONICS
TRX-4M is the truck that goes where you want to go, without boundaries or restrictions. Only Traxxas’ fully-waterproof innovation gives you the freedom to drive through wet grass, puddles, and streams that force others to turn around.
Features
Realistic Body Elements
Great care was taken to replicate the full-size bumpers, fender flares, roof rack, and spare tire in precise 1/18 scale. Even the smallest features like side mirrors, door handles, and wipers are molded in exacting detail for exceptional scale realism.
Detailed 1.0'' Wheels
TRX-4m's replica 1.0'' wheels are authentic scale replicas with molded lug nut and beadlock details. TRX-4m utilizes a standard 7 mm hex, making wheel swaps quick and easy.
LED Lighting
TRX-4m includes standard LED lighting in the front bumper. Add optional Pro Scale LED lights and your TRX-4m comes to life with functional brake lights, headlights, reverse lights, and even emergency flashers (Pro Scale lights sold separately).
Included 2s LiPo Battery with iD
The included 2-cell LiPo battery provides 7.4 volts of high-performance power and over an hour of runtime with Traxxas iD safety and simplicity. The specially-designed iD connector plugs directly into the ECM-2.5.
2-Amp USB Fast Charger with iD
The included 2-amp USB-A charger provides fast and convenient charging almost anywhere. Traxxas iD technology is the easier and safer way to charge LiPo batteries. Just plug the iD battery in and the charger does the rest. When the LED light turns green, the battery is charged.
Molded Fender Flares
Tough fender flares give TRX-4m an aggressive appearance and protect the body from scrapes and damage.
High-Performance Tires
Licensed BFGoodrich Mud Terrain T/A KM3 tires on the Bronco are accurate down to the smallest detail with an authentic lug pattern and raised sidewall lettering. The Defender's Canyon Trail tires are scaled versions of standard TRX-4 rubber with aggressive lugs for dynamic traction.
Triangulated Four-Link Suspension
TRX-4m rides on a sophisticated four-link suspension with heavy-duty triangulated rods. Solid front and rear axles provide excellent articulation to climb over the toughest obstacles.
Heavy-Duty Center Driveshafts
TRX-4m's heavy-duty center driveshafts telescope freely to allow maximum suspension travel. Smooth-running CV joints are engineered for long-lasting, trouble-free performance.
Spool-Equipped Front & Rear Axles
TRX-4m's front and rear axles are locked with spools to supply non-stop climbing power to all four wheels. Tough, steel constant-velocity (CV) joints allow increased steering angle at the front wheels for tight turns.
ECM-2.5 Electronic Control Module
ECM-2.5 features low voltage detection for 2s LiPo batteries and EZ-Set one-button programming to select driving modes. Choose Sport Mode for all-around driving, or Trail Mode for smooth drag braking on steep descents. For a smooth scale look while creeping over technical terrain, Crawl Mode applies full brakes the instant the throttle is released and allows drivers to continue through to reverse without a second push on the trigger.
Optional Transmission Ratios
TRX-4m's modular assembly allows you to swap out different transmissions to change the performance characteristics of the truck. Install the low-range transmission for smooth low-speed torque or boost your top end with the speed gearing option (Optional ratios sold separately).
Steel C-Channel Frame Rails
Heavy-duty frame rails are formed with a deep C-channel for maximum rigidity. The rails are taller through the middle section for increased strength where it's needed most.
Forward-Mounted Motor
The Titan motor mounts securely to the transmission module with a fixed gear mesh that never needs adjustment. The motor’s mounting position shifts the weight bias forward for improved crawling dynamics over obstacles.
Heavy-Duty Steering Servo
TRX-4m's heavy-duty 2065T servo operates on full 6-volt power with a metal main gear for precise control and powerful steering authority. The rugged one-piece drag link sits high up in the axle to avoid snags and impacts.
*Click to See the Full Line of TRX-4m Parts/Accessories
Specifications
Length: 10.3 inches (262 mm) (Bronco)
Front Track: 4.9 inches (124 mm)
Rear Track: 4.9 inches (124 mm)
Ground Clearance: 1.12 inches (29 mm)
Weight (w/o battery): 1.03 pounds (468 g) (Bronco)
Height: 4.6 inches (117 mm) (Bronco)
Wheelbase: 6.10 inches (155mm)
Approach Angle: 54° (Bronco)
Breakover Angle: 45° (Bronco)
Departure Angle: 48° (Bronco)
Shock Length (front and rear): 2.0 inches (51 mm)
Hex Size: 7 mm
Wheels (front and rear): 1.0″ x 0.49″ (26 x 13 mm)
Tires (front and rear): 2.2″ x 1.0″ (57 x 26 mm)
Electronic Control Module: ECM-2.5 (combo ESC, receiver, lighting control*)
*Requires accessory Pro Scale LED Light Kit, sold separately
Motor (electric): Titan 180 87T
Differential Type: Fully locked; 2:1 axle ratio
Chassis Structure/Material: Steel ladder frame with Nylon composite crossmembers
Brake Type: Electronic “Hill Hold”
Drive System: Shaft-driven 4WD
Steering: Axle-mounted servo
Radio System: TQ 2.4 GHz 2-channel transmitter
Servo: 2065T heavy-duty waterproof
Skill Level: 1
Battery Tray: 51 mm L X 31 mm W
Requires
(4) AA batteries for the transmitter
***As with all of our open-box, scratch-and-dent, and used items, we want you to be happy with your purchase. Please contact us with any questions before purchasing. We can send additional photos if needed.
