Traxxas Ford Fiesta ST VXL Brushless 1/10 AWD RTR Rally Car

This is the Traxxas Ford Fiesta Rally VXL Ready-To-Race 1/10 AWD Rally Car with TQi 2.4G Hz Radio System, Velineon brushless power system, and clipless licensed ProGraphix body. Battery and charger are sold separately.

Fiesta ST Rally VXL
60+ MPH RALLY-BRED PERFORMANCE
The Traxxas Ford Fiesta ST Rally VXL dominates the track with agile handling, AWD traction, and the 60+ mph speed of the legendary Velineon brushless power system. Rally’s officially licensed clipless body and high-grip gravel tires offer the full rally racing experience. Additionally, Fiesta ST Rally now comes standard with Traxxas’ Extreme Heavy Duty Upgrade parts for game-changing strength and durability.

EXTREME BRUSHLESS POWER
Fiesta ST Rally VXL's Velineon 3s brushless power system delivers the ultimate in efficiency, speed, and run-time with precise and responsive throttle control. Rally VXL transforms 3s LiPo power into lightning-fast speed and tire-melting acceleration. This is brushless performance done the Traxxas way: brutally fast and easy to use.

EXTREME HEAVY DUTY UPGRADE PARTS
Rally’s factory-installed Extreme Heavy Duty Upgrade parts replace key drivetrain and suspension components with beefed-up parts made for ultimate strength and durability. From the HD shock towers to the steel wheel hubs, this is the strongest driveline ever offered in a Rally.

CLIPLESS CONVENIENCE
Rally’s innovative clipless body features secure mounting with quick and easy removal. No posts, no clips—just drop the body onto the chassis and snap it into place for a secure hold. When it’s time to change the battery, release the side tabs and lift up to access the chassis in just seconds.

Features

• Clipless Body
  
  • Officially licensed Ford Fiesta ST body
  • Pre-painted with applied decals
  • Tough composite rear wing
  • High approach angle front bumper
  • Internal reinforcement with integrated nerf bars
  • Holds tight for intense action
  • Quick and easy removal
• Extreme Heavy Duty Upgrade parts Installed
  
  • Strengthened C-hubs, axle carriers, and steering blocks
  • Extreme heavy duty driveshafts
    
    • Oversize diameter
    • 6 mm axles
• TQi 2.4 GHz High Output Radio System
  
  • TQi 2-channel transmitter
  • Programmable multi-function knob
  • Automatically stores and loads settings for up to 30 Traxxas Link-enabled models
  • 5-channel receiver (6533) with fail-safe security
  • Waterproof receiver box with easy-access plug
• Traxxas Stability Management (TSM)
  
  • Improves straight line acceleration and braking on low-traction surfaces
  • Maintains steering composure to allow throttle-on powerslides
  • Never dulls throttle or slows the model
  • Adjusts from off to 100% assistance from the transmitter
• VXL-3s Waterproof Electronic Speed Control
  
  • Heat sink accepts accessory cooling fan (3340)
  • Three Programmable Drive Profiles
    
    • Sport Mode - Forward / Brake / Reverse
    • Race Mode - Forward / Brake
    • Training Mode - 50% Forward / Brake / 50% Reverse (patented)
  • Traxxas EZ-Set one-button setup
  • Built-in two-stage low-voltage detection for LiPo batteries
  • NiMH battery packs: 6-8 cells (7.2 to 9.6 volts)
  • LiPo battery packs: 2-3 cells (7.4 to 11.1 volts)
• Velineon 3500 kV Brushless Motor
  
  • Ultra high-temperature sintered Neodymium magnets
  • Low-maintenance design
  • Efficient high-speed ball bearings
  • Precision-balanced rotor
  • 3500 kV
  • Brilliant blue-anodized finish
• Steering
  
  • Chassis-mounted 2075 servo
  • Dual bellcrank design with integrated servo saver
• Chassis
  
  • High approach angle front bumper
  • Modular chassis makes maintenance quick and easy
  • Batteries and electronics held low for improved handling
  • Low-CG design dramatically increases corner speed
  • Easy motor access with single-screw motor plate attachment
• Suspension
  
  • Oil-filled Ultra Shocks
  • White powder-coated springs
• Drivetrain
  
  • Heavy Duty slipper clutch with aluminum pads
  • Full-time shaft-driven 4-wheel drive
  • Sealed steel gear front and rear differentials
  • Large 32-pitch spur gear
• Wheels and Tires
  
  • 2.2″ outer, 3″ inner diameter dual-profile 12-spoke rally wheels
  • Pre-glued all-terrain rally tires with performance foam inserts
  • Steel wheel hexes
• Sealed Ball Bearings
• Hex hardware with Rust-Resistant Black Oxide Coating

Dual-Profile Rear Wing
Fiesta ST Rally VXL's prominent dual-profile rear wing is optimized to reduce drag while providing downforce for high-speed stability. The injection-molded wing features multiple reinforced mounting points for increased durability in case of rollovers.

Long-Travel Suspension
Fiesta ST Rally has huge amounts of seemingly bottomless, ultra-plush suspension travel to swallow up jumps and delivers incredible control. Performance-optimized suspension components provide maximum articulation without binding or interference.

5-Channel Receiver with Fail-Safe Security
In the event of signal loss due to an accidental transmitter switch-off or depleted batteries, the receiver automatically returns the throttle to neutral and holds the last commanded steering position. The fail-safe programming is conveniently built-in and does not need to be activated.

Digital High-Torque Waterproof Servo
Rally VXL’s extreme speed and quick reflexes require a steering servo that’s both strong and fast. The 2075 digital high-torque servo features 125 oz-in of torque and ball bearings for powerful and precise steering authority.

High Approach Angle Bumper
Rally's smooth under tray reduces snags while the high approach angle front bumper allows the vehicle to clear driveways and expansion joints without raising the overall height of the vehicle or its low center of gravity.

Race Inspired Tires and Wheels
Rally's unique directional tire tread pattern is captured in high-grip rubber for the ultimate bite on or off the pavement. Equal parts style and strength, the rugged rally wheels feature a 12-spoke rally replica design in the same offset as Slash 4X4 wheels.

Specifications
Length: 21.00 inches (535 mm)
Front Track: 11.00 inches (281 mm)
Rear Track: 11.00 inches (281 mm)
Ground Clearance: 0.80 inches (21 mm)
Weight (no battery): 5.8 pounds (2.63 kg)
Height (overall): 8.10 inches (206 mm)
Wheelbase: 12.8 inches (324 mm)
Shock Length (front): 3.45 inches (88 mm) - Long
Shock Length (rear): 3.98 inches (101 mm) - XX-long
Speed Control: Velineon VXL-3s electronic speed control
Motor (electric): Velineon 4-pole 3500 kV sensorless brushless
Overall Drive Ratio: 11.82:1
Differential Type: Hardened steel bevel, sealed, limited slip
Gear Pitch: 32 pitch
Chassis Structure/Material: Composite tub
Drive System: Shaft-driven 4WD
Steering: Dual-bellcrank with integrated servo saver
Tires: Gravel pattern directional with foam inserts
Tire Diameter: 3.0 inches (76 mm) (front and rear)
Wheels (front/rear): 12-spoke rally wheels
Wheel Diameter: 2.2″ (56 mm) (outer), 3.0″ (76 mm) (inner)
Radio System: TQi 2.4 GHz (2-channel)
Servo: Waterproof digital 2075 servo (125 oz-in torque)
Skill Level: 2
Battery Compartment (L/W/H): 165 x 50 x 23/26 mm

*Click to See the Full Line of Rally Parts/Accessories

Requires
(4) AA Batteries for transmitter
6 or 7-cell NiMH flat pack or 2-3S LiPo
Compatible Charger