This is the Traxxas Ford Fiesta ST Ready-To-Race 1/10 AWD Rally Car with TQ 2.4G Hz Radio System, BL-2s brushless power system, and clipless licensed Ford Fiesta ST ProGraphix body.
*Battery and charger are required for completion. See recommended items below.
RALLY-BRED PERFORMANCE WITH NEW BL-2s BRUSHLESS POWER
The Traxxas Ford Fiesta ST Rally dominates the track with agile handling and superior AWD traction. Rally’s officially licensed clipless body and high-grip gravel tires offer the full rally racing experience. Rally’s new BL-2s brushless power system delivers effortless high-speed power with an added boost of torque for powerful acceleration. Additionally, Fiesta ST Rally now comes standard with Traxxas’ Extreme Heavy Duty Upgrade Kit for game-changing strength and durability.
NEW BRUSHLESS POWER
Rally’s new BL-2s brushless power system gets you to the finish line first with more speed, quicker acceleration, and a more responsive throttle. Improved efficiency, high-speed ball bearings, and an internal cooling fan allow Fiesta ST Rally to run battery after battery for all day fun. With no brushes to wear out, the BL-2s 3300 kV motor is long-lasting and requires virtually no maintenance.
EXTREME HEAVY DUTY UPGRADE KIT
Rally’s factory-installed Extreme Heavy Duty Upgrade Kit replaces key drivetrain and suspension components with beefed-up parts made for ultimate strength and durability. From the HD shock towers to the steel wheel hubs, this is the strongest driveline ever offered in a Rally.
CLIPLESS CONVENIENCE
Rally’s innovative clipless body features secure mounting with quick and easy removal. No posts, no clips—just drop the body onto the chassis and snap it into place for a secure hold. When it’s time to change the battery, release the side tabs and lift up to access the chassis in just seconds.
Features
- Clipless Body
- Officially Licensed Ford Fiesta ST body
- Pre-painted with applied decals
- Tough composite rear wing
- High approach angle front bumper
- Quick and easy removal
- Holds tight for intense action
- Extreme Heavy Duty Upgrade Kit Installed
- Strengthened C-hubs, axle carriers, and steering blocks
- Extreme heavy duty driveshafts
- Oversize diameter
- 6 mm axles
- Steel wheel hexes
- TQ 2.4 GHz Transmitter
- Ergonomic transmitter with internal antenna
- Traxxas 6519 3-channel micro receiver with fail-safe security
- Patented O-ring sealed watertight receiver box keeps the micro receiver dry
- BL-2s Waterproof Electronic Speed Control
- Heat sink accepts accessory cooling fan
- Three Programmable Drive Profiles
- Sport Mode - Forward / Brake / Reverse
- Race Mode - Forward / Brake
- Training Mode - 50% Forward / Brake / 50% Reverse (patented)
- Traxxas EZ-Set one-button setup
- Built-in two-stage low-voltage detection for LiPo batteries
- NiMH battery packs: 6-7 cells (7.2 to 8.4 volts)
- LiPo battery packs: 2 cells (7.4 volts)
- BL-2s Brushless Motor
- Integrated cooling fan
- Low-maintenance design
- Efficient ball bearings
- 3300 kV
- Steering
- Chassis-mounted 2056 servo
- Dual bellcrank design with integrated servo saver
- Easy Access Battery Compartment
- Adjustable battery hold down
- Accepts 6- and 7-cell NiMH flat packs and 2-cell LiPo batteries
- Low-CG Reinforced Modular Chassis
- High-angle front bumper
- Modular chassis makes maintenance quick and easy
- Batteries and electronics held low for improved handling
- Low-CG design dramatically increases corner speed
- Easy motor access with single-screw motor plate attachment
- Suspension
- Heavy duty suspension arms
- Oil-filled Ultra Shocks
- Drivetrain
- Full-time shaft-driven 4-wheel drive
- Oil-filled steel gear front and rear differentials
- Large 32-pitch steel spur gear
- Wheels and Tires
- Pre-glued all-terrain rally tires with performance foam inserts
- 2″ outer diameter, 3″ inner diameter dual-profile 12-spoke rally wheels
- Rubber-Sealed Ball Bearings
- Precision Hex Hardware
Dual-Profile Rear Wing
Fiesta ST Rally's prominent dual-profile rear wing is optimized to reduce drag while providing downforce for high-speed stability. The injection-molded wing features multiple reinforced mounting points for increased durability in case of rollovers.
Extreme Suspension Components
Rally comes outfitted with the Extreme Heavy Duty Upgrade Kit already installed for ultimate strength and durability. The axle carriers, C-hubs, and steering blocks are beefed up with more material and stronger construction.
Oil-Filled Ultra Shocks
Rally's oil-filled Ultra Shocks utilize X-rings for a perfect seal and super-smooth performance. Adjust the ride height and pre-load on the white powder-coated springs with the included spacer clips. Ultra Shocks are fully tunable with a wide range of oils, springs, and pistons available.
Long-Travel Suspension
Fiesta ST Rally has huge amounts of seemingly bottomless, ultra-plush suspension travel to swallow up jumps and delivers incredible control. Performance-optimized suspension components provide maximum articulation without binding or interference.
3-Channel Receiver with Fail-Safe Security
In the event of signal loss due to an accidental transmitter switch-off or depleted batteries, the receiver automatically returns the throttle to neutral and holds the last commanded steering position. The fail-safe programming is conveniently built-in and does not need to be activated.
Waterproof Receiver Box
Rally's waterproof receiver box keeps the receiver safe and dry while still allowing easy access for maintenance. The antenna and servo wires route neatly through a patented water-tight seal for true all-weather fun.
Perfect Weight Bias
Each component on the Rally chassis is positioned for optimal weight distribution and space utilization. The result is perfect weight bias for neutral handling precision. The bulk of the mass is distributed down the centerline of the chassis for smooth, stable cornering.
Innovative Chassis
Rally's modular chassis design allows the entire front section to be removed with just 5 screws, and the rear assembly with just 4 screws. In less than a minute using a power screwdriver, you have full access for easy service and adjustment.
Dual Bellcrank Steering with Servo Saver
Rally's dual-bellcrank design pivots smoothly even in the harshest conditions. An integrated cam-type servo saver protects the steering servo from crash impacts without sacrificing steering precision.
Digital Steering Servo
The Traxxas 2056 steering servo provides powerful steering authority on tough terrain with 80 oz-in of steering muscle. The fully-waterproof servo uses special O-ring seals to keep the fun going even when things get wet.
High Approach Angle Bumper
Rally's smooth under tray reduces snags while the high approach angle front bumper allows the vehicle to clear driveways and expansion joints without raising the overall height of the vehicle or its low center of gravity.
Race Inspired Tires and Wheels
Rally's unique directional tire tread pattern is captured in high-grip rubber for the ultimate bite on or off the pavement. Equal parts style and strength, the rugged rally wheels feature a 12-spoke rally replica design in the same offset as Slash 4X4 wheels.
Maxx-Duty Driveshafts
Rally's Maxx-duty driveshafts with beefed-up U-joints are built to handle brushless power without breaking a sweat. Large 6mm axles key into the included steel wheel hexes for unmatched strength and durability.
Specifications
Length: 21.00 inches (535 mm)
Front Track: 11.00 inches (281 mm)
Rear Track: 11.00 inches (281 mm)
Ground Clearance: 0.80 inches (21 mm)
Weight (no battery): 5.8 pounds (2.63 kg)
Height (overall): 8.10 inches (206 mm)
Wheelbase: 12.8 inches (324 mm)
Shock Length (front): 3.45 inches (88 mm) - Long
Shock Length (rear): 3.98 inches (101 mm) - XX-long
Speed Control: BL-2s electronic speed control
Motor (electric): BL-2s 3300 kV sensorless brushless
Overall Drive Ratio: 11.82:1
Differential Type: Hardened steel bevel, sealed, limited slip
Gear Pitch: 32 pitch
Chassis Structure/Material: Composite tub
Drive System: Shaft-driven 4WD
Steering: Dual-bellcrank with integrated servo saver
Tires: Gravel pattern directional with foam inserts
Tire Diameter: 3.0 inches (76 mm) (front and rear)
Wheels (front/rear): 12-spoke rally wheels
Wheel Diameter: 2.2″ (56 mm) (outer), 3.0″ (76 mm) (inner)
Radio System: TQ 2.4 GHz (2-channel)
Servo: Waterproof digital 2056 servo (80 oz-in torque)
Skill Level: 1
Battery Compartment (L/W/H): 165 x 50 x 23/26 mm
Requires
(4) AA batteries for transmitter
One 6 or 7 Cell NiMH stick pack or 2S LiPo battery
Compatible charger
