Traxxas Stampede 4X4 Brushless BL-2s RTR Monster Truck w/2S LiPo COMBO

This Combo Includes:
Traxxas Stampede 4X4 Brushless Truck
EZ-Peak ID LiPo Charger
7.4V 2S 5800mAh LiPo Battery

This is the Traxxas Stampede 4X4 Brushless Ready-to-Run Waterproof Radio Controlled Monster Truck 2S Lipo Combo with 5800mAh 2S LiPo, EZ-Peak ID Charger, with clipless body, extended chassis, Extreme Heavy Duty Upgrade Kit, BL-2s Brushless power system and the TQ 2.4GHz Radio System (Traxxas Bluetooth Link Module Compatible - Module sold separately). 

Stampede 4X4 Brushless
Bigger and Stronger Then Ever!
Stampede 4X4 is bigger and badder than ever with a new clipless body, extended chassis, and huge 5.3″ Sledgehammer tires for an aggressive monster truck stance. Stampede’s all-new BL-2s brushless power system delivers effortless power for all-day fun with an added boost of torque for terrain-shredding burnouts and powerful acceleration. Stampede 4X4 also comes standard with Traxxas’ Extreme Heavy Duty Upgrade Kit to become the new standard for strength and durability.

NEW BL-2S BRUSHLESS POWER SYSTEM
Stampede 4X4’s BL-2s brushless power system ramps up the fun with up to 60% more speed and faster acceleration than comparable brushed power systems. Improved efficiency, high-speed ball bearings, and an internal cooling fan allow Stampede 4X4 to run battery after battery for all-day fun. With no brushes to wear out, the BL-2s 3300 kV is long-lasting and requires virtually no maintenance.

EXTREME HEAVY DUTY UPGRADE KIT
Stampede 4X4’s pre-installed Extreme Heavy Duty Upgrade Kit replaces key drivetrain and suspension components with beefed-up parts made for ultimate strength and durability. From the HD suspension arms to the steel wheel hubs, this is the strongest driveline ever offered in a Stampede.

CLIPLESS BODY MOUNTING
Stampede 4X4 now uses a clipless body latching system for secure mounting and fast, one-handed removal and installation. A rugged internal cage attaches to the body with molded reinforcements to prevent pull-through damage. Tough roof and tailgate skids protect the body in the event of a rollover.

Features

• BL-2s Waterproof Electronic Speed Control
  
  • Heat sink accepts accessory cooling fan (#3340)
  • Three Programmable Drive Profiles
    
    • Sport Mode - Forward / Brake / Reverse
    • Race Mode - Forward / Brake
    • Training Mode - 50% Forward / Brake / 50% Reverse (patented)
  • Traxxas EZ-Set one-button setup
  • Built-in two-stage low-voltage detection for LiPo batteries
  • NiMH battery packs: 6-7 cells (7.2 to 8.4 volts)
  • LiPo battery packs: 2 cells (7.4 volts)
• 3300 kV Brushless Motor
  
  • Integrated cooling fan
  • Low-maintenance design
  • Efficient ball bearings
  • 3300 kV
• TQ 2.4 GHz Transmitter
  
  • Full-size 2-channel transmitter
  • All-day comfort with precise long-range control
• Extreme Heavy-Duty Upgrade Kit Installed
  
  • Strengthened C-hubs, axle carriers, and steering blocks
  • Extreme heavy-duty driveshafts
    
    • Oversize diameter
    • 6mm axles
    • Steel wheel hexes
• Clipless ProGraphix Body
  
  • Tough reinforced bumpers
  • Reinforced inner cage
  • Rugged roof rollover protector
  • Tailgate protector
  • Holds tight for intense action
  • Quick and easy removal
• Chassis
  
  • Modular composite tub design
  • Secure battery hold-down latch
  • High angle bumpers
• Suspension
  
  • HD-composite suspension arms
  • Oil-filled Ultra Shocks
  • White powder-coated springs
• Steering
  
  • Chassis-mounted #2075 servo
  • Dual bellcrank design with integrated servo saver
• Drivetrain
  
  • Full-time shaft-driven 4-wheel drive
  • Oil-filled steel gear front and rear differentials
  • Large 32-pitch steel spur gear
• Wheels and Tires
  
  • Large 2.8” graphite gray wheels
  • Tall 5.3” Sledgehammer tires
• Sealed Ball Bearings
• Hex hardware with Rust-Resistant Black Oxide Coating

Specifications
Length: 17.87 inches (454mm)
Width: 13.10 inches (333mm)
Ground Clearance: 2.44 inches (62mm)
Weight: 5.98 pounds (2.7kg) without batteries
Height: 8.34 inches (212mm)
Wheelbase: 11.62 inches (295mm)
Front Shock Length: 3.45 inches (88mm) - Long
Rear Shock Length: 3.98 inches (101mm) - XX-Long
Tires (pre-glued): 5.3 inches (133mm) tall Sledgehammer
Wheels: 2.8 inches (71mm) graphite gray wheels
Speed Control: BL-2s electronic speed control
Motor (electric): BL-2s 3300 kV sensorless brushless
Gear Pitch: 32
Overall Drive Ratio: 15.36:1
Differentials: Hardened steel bevel, sealed, limited slip
Chassis Structure / Material: Modular composite tub
Brake Type: Electronic
Drive System: Shaft driven 4WD
Steering: Dual bellcrank with integrated servo saver
Radio System: TQ 2.4 GHz (2-channel)
Servo: Waterproof #2075
Skill Level: 1
Battery Compartment (L/W/H): 162mm x 47mm x 26mm

Requires
(4) AA Batteries for transmitter