Traxxas

This is the Battery Expansion Kit for the Traxxas Rustler and Stampede 2WD, and Monster Jam trucks. It will fit both the XL-5 brushed and VXL brushless models. The package includes hardware to raise...

This is the Traxxas Rustler 4x4 Black Wing with 3x8mm Flathead Capscrews (3).Stock Replacement OnRustler 4x4 BrushedRustler 4x4 VXL

This is a full set of four Traxxas 1.9" Response Tires Pre-Mounted on Split Spoke Black Chrome Wheels for the Traxxas 4-Tec 2.0 cars. Foam inserts are pre-installed as well. The set includes two...

This is the Traxxas 16-Tooth 32-Pitch Machined Hardened Steel Pinion Gear with Set Screw. These are a great way to improve drivetrain durability, and are a must if running a steel spur gear.Accessory...

This is the Traxxas 14-Tooth 32-Pitch Machined Hardened Steel Pinion Gear with Set Screw. These are a great way to improve drivetrain durability, and are a must if running a steel spur gear...

This is a pair of Traxxas Pink Rear Springs for Stampede, Slash 2WD, Rustler, and many other vehicles. These fit the Traxxas XX-Long Ultra Shocks.Accessory Part ForBIGFOOT No. 1 Officially Licensed...

This is a pair of Traxxas Green Beadlock Style Sidewall Protector with Screws for use with Traxxas Geode 3.8" Wheels.Includes:Two Green Sidewall ProtectorsTwenty Four 2x6mm ScrewsSpecificationsInner...

This is the Traxxas Red Aluminum Antenna Crimp Nut with Nut Wrench, for use on many Traxxas vehicles including the Revo, E-Maxx, Jato, Slash 2WD, and T-Maxx trucks.Fits1/10 E-Revo Brushed1/10 E-Revo...

This is the Traxxas Stampede 4x4 LED Lightbar with 4 LEDs. This is a fully-functioning lightbar set that can be powered off an open port on the receiver. Everything required to use this light bar...

These are the Traxxas Red Aluminum Turnbuckles with rod ends for the 1/10 Stampede XL-5 and VXL 2WD trucks.Traxxas’ aluminum turnbuckles make it easy to add strength and adjustability to your...

These are Traxxas Non-Adjustable Front and Rear Camber Links for the Rustler and Stampede XL editions. Features: Gray plastic construction Includes: Two short links, Two long...

This is the Complete Planetary Gear Differential With Steel Ring Gear for the Traxxas Bandit, Stampede and Rustler. FEATURES:Metal gear shaftsMetal and plastic main differential INCLUDES:Main...

This is the Replacement Roller Clutch for the Traxxas 2.5 and 3.3. This is located at the EZ Start end of the crankshaft. This is the One Way bearing for the EZ starter and is also used with a pull...

This is the Traxxas Unlimited Desert Racer Satin Black Chrome-Plated Front Bumper and Support. These bolt right in with a perfect factory fit, adding a new level of scale realism to the...

This is the Traxxas 31-Tooth 0.8 Mod Pinion Gear with Set Screw for 5mm Shaft Motors.Accessory Part ForUnlimited Desert Racer (UDR)

This is the Traxxas Drive Dog and Set Screw for the Spartan and DCB M41 Boats. Drive dog with stainless 4x3 mm grub screwReplacement Part ForDCB M41 WidebodyDisruptorSpartan SRSpartan

This a bottle of 10K Weight Diff Oil (1.75 oz / 50cc) with a filler nozzle. This oil can be used in a wide range of Traxxas vehicles to help tune the differentials for optimum performance.For use...

This is a set of two Traxxas Black Chrome SS Split Spoke Wheels pre-glued with Maxx Tires (6.3-inch outer diameter). These will fit the Revo, E-Maxx, and T-Maxx trucks using 17mm hex hubs. These are...

This is the Traxxas Front Suspension Arm Set for use on the 1/16 Slash VXL 4WD. Features: Nylon construction Black in color Includes:One Upper Right Suspension ArmOne Lower Right Suspension ArmOne...

This is a pair of replacement Traxxas 14mm Steel Wheel Hex Hubs and Pins. These will fit many Traxxas vehicles, including the T-Maxx 2.5, 3.3, E-Maxx, Revo, E-Revo, Summit, and Slayer vehicles...

This is a pair of the Traxxas Nitro Rear/Electric Front All Star Wheels and Anaconda Tires. FEATURES:Black chrome plated plastic, five spoke designSplit X-Pattern tread tires with foam...

These are the Traxxas E-Revo 2 Center Half Shafts. These are the plastic components only.Stock Replacement OnE-Revo 2.0

This is the Traxxas Spring, shock (GTR) (2.22 rate, black) (1 pair). This is Traxxas part number 7148Part Number: 7148 / TRA7148Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Grave Digger1/16...

This is the Traxxas Big Bore Shock Piston Head Set with Mounting Bushings. This set includes two 2-hole pistons, two 3-hole pistons, two shock mounting bushings, and two washers.Includes2- Pistons...

This is a Traxxas 30-Tooth Steel Idler Gear.  This works on many Traxxas vehicles. Features: Steel construction Includes: One steel 30T idler gear

This is a set of Traxxas Long Truck Half-Shafts for the Rustler, Stampede, and Slash 2WD vehicles. Includes:2 white nylon telescoping shaft (each shaft is made of two pieces)4 aluminum U-joints

This is a shock rebuild kit for 2 Traxxas black plastic shocks. Includes:4 E-clips2 C-clips2 O-rings8 Washers2 Diaphrams Replacement Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisChevrolet...

This is the Traxxas Velineon Mini Maxx 380 Brushless Motor (Assembled with 16-Gauge Wire and Gold-Plated Connectors) The Velineon 380 Brushless Motor uses ultra high-temperature Neodymium magnets,...

This is the Traxxas Machined Spiral Cut Rear Differential Ring and Pinion Gear Set. These can be used as an upgrade in place of Traxxas 6879X gears for improved durability. Accessory part forSlash...

These are the Traxxas Pink Aluminum 4mm Flanged Wheel Nuts (4). These wheel nuts fit a wide variety of Traxxas vehicles. Lightweight and great looking, these 4 mm anodized aluminum flanged lock nuts...

This is the Traxxas Cush Drive Key, Pin, and Elastomer Damper.FitsX-Maxx 8SXRT

This is the Traxxas Aton Rotor Blade Set (2) (Black) w/Screws. This is Traxxas part number 7926Part Number: 7926 / TRA7926FitsAtonAton PlusMore detail coming soon! Please check your vehicle manual...

This is the Traxxas Gear, 9-T pinion (32-p) (mach. steel)/ set screw. This is Traxxas part number 6745Part Number: 6745 / TRA6745FitsStampede 4x4 VXLStampede 4x4 XL-5More detail coming soon! Please...

This a Traxxas Steel Replacement Constant-Velocity Driveshaft for Revo 3.3, 1/10 E-Revo, T-Maxx 3.3, and E-Maxx trucks using the Traxxas 5451R driveshaft set.Includes: One steel constant-velocity...

This is a set of Traxxas 3mm Hardened Set Screws, also known as grub screws. Each package includes 12 set screws. Set of twelve 3 mm hardened steel grub screwsReplacement part for these models1/16...

This is the Traxxas Bandit Replacement Body Set (front & rear) with window, lights, and grill decal sheet. This will work on the Bandit XL-5 and Bandit VXL buggies.RequiresPainting

This is the Long RPM Sensor from Traxxas. The RPM sensor plugs directly into your TQi receiver to provide real-time speed and RPM data while you drive. Real-time telemetry requires a telemetry...

This is a Traxxas Fiberglass Tie Bar for the Nitro Rustler, Stampede, and Bandit. The fiberglass tie bar strengthens the front bulkhead and suspension arms. Requires #2640 suspension pins to...

This is the Traxxas Velineon VXL-3m Brushless Power System for use in Traxxas 1/16 Scale vehicles. This will not fit 1/10 scale vehicles.Like its larger 1/10 scale counterpart, the 1/16 scale...

This is the Traxxas Differential Kit for the Traxxas 1/10 E-Revo, E-Revo Brushless, and E-Maxx 16.8V, and E-Maxx Brushless trucks.The new Traxxas center differential for E-Revo and E-Maxx...