Traxxas Disruptor

This is the Traxxas Antenna Cap Set with Antenna Spool. The antenna spool is used for wrapping excess antenna wire before inserting it in the antenna tube to prevent wire from hanging out the end of the tube, preventing damaged antenna wires caused by...

This is the Traxxas Water Cooling Tubing (1-meter) Replace your broken cooling lines with this water cooling tubing. 1 meter length. Replacement Part ForDCB M41 WidebodyDisruptorSpartan SRSpartan

This is the Traxxas 2075X Digital High-Torque Metal Gear Waterproof Ball Bearing Servo. This is the stock steering servo on the TRX-4 Trail Crawler. It can be used as an upgrade for any 1/10 Traxxas vehicle currently running a standard 2075 servo. The...

This is the Traxxas TQi 2.4GHz 2-Channel Radio System with 5-Channel Traxxas Stability Management (TSM) telemetry-enabled receiver included. Traxxas Stability ManagementTraxxas Stability Management (TSM) allows you to experience all the extreme power,...

These are the Traxxas Motor Coupler, Collet, Hardware and Wrenches Collet-style motor coupler with 4x3 stainless grub screw with applied threadlock and 10 mm wrenches (2) Replacement Part ForDCB M41 WidebodyDisruptorSpartan

This is the Traxxas Stuffing Tube Seal and Pushrod Seal Stuffing tube seal and push rod hull seal Replacement Part ForDCB M41 WidebodyDisruptorSpartan

This is a set of Traxxas LiPo Battery Charge Indicator Plug Set. The set includes four Green, four Blue, and four Grey indicator plugs. Use these plugs to know which batteries are fully charged, discharged, or in storage charge, and to protect the...

This is a set of four Traxxas Green-Anodized Aluminum 4mm Lock Nuts with a Flanged and Serrated surface.Features May be used in any application requiring this size locknut Serrated rear section ensures sure grip Includes: Four 4mm Flanged...

This is the Traxxas 5000mAh 14.8v 4-Cell 25C LiPo Battery (155mm). These can be used in the Maxx 4S, Unlimited Desert Racer (UDR) and X-Maxx 8S trucks.FitsMaxx 4SUnlimited Desert Racer (UDR)X-Maxx 8SSpecificationsTotal Capacity: 5000mAhVoltage: 14.8VC...

This is the Traxxas Drive Dog and Set Screw for the Spartan and DCB M41 Boats. Drive dog with stainless 4x3 mm grub screwReplacement Part ForDCB M41 WidebodyDisruptorSpartan SRSpartan

These are the Traxxas Pink Aluminum 4mm Flanged Wheel Nuts (4). These wheel nuts fit a wide variety of Traxxas vehicles. Lightweight and great looking, these 4 mm anodized aluminum flanged lock nuts are the perfect finishing touch for your vehicle. The...

This is the Traxxas iD LiPo Battery Balance Adapter for Cell Voltage Checkers. This works with 2S, 3S, and 4S ID LiPo batteries to connect them to cell voltage checkers for individual cell reading. Warning: These are not intended for charging. The...

This is the Traxxas 2056 High-Torque Waterproof Servo   High-Torque Waterproof Servo 80 oz-in torque Transit time 0.23 sec/60°   Replacement Part For Bandit BIGFOOT No. 1 Officially Licensed Replica Bigfoot Officially Licensed...

This is the Traxxas LiPo cell voltage checker and balancer with the #2938X adapter for use with Traxxas iD batteries. This can be used to check cell voltages on 2S, 3S, and 4S Traxxas ID LiPo batteries, and also to equalize the battery pack cells if...

This is the Traxxas Disruptor Aluminum Rudder Arm Aluminum Rudder Arm. Includes(2) 3x15mm BCS (Stainless)(1) 3x18mm BCS (Stainless)(3) NL 3.0 Accessory Part ForDisruptor

This is the Traxxas Disruptor Aluminum Rudder Mount and Hinge Pin with Hardware Aluminum rudder mount and hinge pin. Includes (4) 4x14mm BCS (Stainless)(2) NL 4.0(1) 4x3mm GS (Stainless, with Threadlock) Accessory Part ForDisruptor

This is the Traxxas Curved Tip Heavy Duty Body Scissors for cutting and trimming polycarbonate RC bodies. To do a good job on a custom body, the right tools are a must. Having both a curved tip and straight tip (Traxxas part TRA3431) scissors in your...

This is the Traxxas Straight Tip Heavy Duty Body Scissors for cutting and trimming polycarbonate RC bodies. To do a good job on a custom body, the right tools are a must. Having both a straight tip and curved tip (Traxxas part TRA3432) scissors in your...

This is the Traxxas Sealed Waterproof Receiver Box with Hardware.  Sealed receiver box for Traxxas micro receivers.IncludesOne Receiver BoxOne Rubber SealFoam PaddingTwo 2.5x8mm Cap Head ScrewsTwo 3x10mm Cap Head ScrewsTwo 2.5x10mm Cap Head...

These are Traxxas 4mm Stainless Locking Nuts. These will fit many different Traxxas vehicles, and are a great item to keep in your toolbox.Features:Stainless steel construction.Nylon insert.Includes:Six Lock NutsSpecifications:Size: 4mm

This is the Traxxas Disruptor Rudder (80mm) Replacement Rudder (80mm) Replacement Part ForDisruptor

This is the Traxxas Receiver Box Seal Kit with O-ring, Seals, and Silicone Grease. This is for use on with the 3628 waterproof receiver box. Refresh your 3628 sealed receiver box with this seal kit. Includes new O-ring, foam seal, and silicone grease...

This is the Traxxas Disruptor Propeller Shaft and Flex Cable Replacement propeller shaft/ flex cable Replacement Part ForDisruptor

This is the Traxxas Disruptor Drive Strut Replacement Drive strut Replacement Part ForDisruptor

This is the Traxxas Disruptor Stuffing Tube (Assembled with Liner) Replacement stuffing tube assembled with liner Replacement Part ForDisruptor

This is the Traxxas Disruptor Electronics Tray with Stuffing Tube Clamp and Hardware Replacement electronics tray with stuffing tube clamp, (2) 2.5x8mm stainless steel screws, (2) 3x10mm stainless steel screws and (2) 4x12mm stainless steel...

This is the Traxxas Stainless Steel Hardware Kit for Spartan SR and Disruptor Contains all stainless steel hardware used on the Disruptor or Spartan SR boats. Replacement Part ForDisruptorSpartan SR

This is the Traxxas Premium Large Rubber Overmold Speed Bit Handle with 1/4" Drive for use with Traxxas Speed Bit Metric Hex/Allen and Nut Driver tips. The large speed bit handle holds bits securely with an overmolded rubber grip to provide excellent...

This is the Traxxas Aluminum Handled Body Post Hole Reamer with Cap for Lexan RC bodies.  With a crisp steel cutting edge and included aluminum cap for protection, this is not your average body reamer.  The tip features both metric (mm) and...

This is the Traxxas Disruptor Rudder Mount, Steering Arm, Drive Strut Mount and Hull Water Outlet with Hardware Replacement rudder mount, steering arm, drive strut mount, and hull water outlet. Includes mounting hardware Replacement Part ForDisruptor

This is a tube of Traxxas Marine Grease (30cc) for use on RC boats like the Traxxas Spartan. This is a must-have accessory to keep the flexshaft of your boat in good condition and performance at its peak! Use marine grease liberally on your propeller...

These are Traxxas 3x10mm Hex Screws (6). Features: Steel construction cap head with hexagon socket drive insert Metal lock washers Includes:(6) Screws(6) Lock Washers(1) Hex Wrench Specifications:Screws:Diameter: 3mmLength: 10mm Lock Washers:Inner...

This is the Traxxas Disruptor Motor Mount Replacement Motor Mount Replacement Part ForDisruptor

This is the Traxxas Disruptor Rudder Pushrod and Servo Horn Assembled Rudder pushrod and servo horn. Includes(1) 3x22mm BCS (Stainless)(1) 3x15mm CS (Stainless) Replacement Part ForDisruptor

These Traxxas (225mm) Battery StrapsIncludes: 4 battery strapsSpecificationsLength: 9" (228mm)Width: .62" (16mm)Replacement Part ForDCB M41 WidebodyDisruptorSpartan

This is the Traxxas Disruptor Trim Tab & Turn Fin (Left & Right) with Hardware Replacement trim tab & turn fin (left & right) with (4) 4x12mm stainless BCS Replacement Part ForDisruptor

This is the Traxxas Disruptor Hatch Seals (4) Four Replacement Hatch Seals Replacement Part ForDisruptor

These are the TraxxasBoat Blue Aluminum Drive Strut Mounts Blue-anodized aluminum drive strut mounts (2) Replacement Part ForDCB M41 Widebody Accessory Part ForDisruptor

This is the Traxxas Hatch Nut/Mounting Set Replacement hatch nut set includes four standard hatch nuts and four wingnuts along with (4) O-rings and (4) Stainless 3x8 mm screws Replacement Part ForDisruptorSpartan SR

This is the Traxxas Hatch Mounts (4) Set of four replacement hatch mounts with 3x8 mm stainless screws (9) Replacement Part ForDisruptorSpartan SR