Nitro Sport

This is the Traxxas TRX 2.5 & 3.3 Engine Backplate 20x1.4mm O-Ring, part number 5213.

This is the Traxxas EZ-Start 1 Quick Connector Stock Replacement Wiring Harness. Features: All wires included in an EZ starting system Includes:One complete wire set with connectorsTwo zip tiesOne adhesive foam pad Requires: The remainder of the EZ...

This is Traxxas Rod Ends Short Hollow Balls Set of six short rod ends with hollow ball connectors Replacement Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLBanditBIGFOOT No. 1 Officially Licensed ReplicaChevrolet Corvette StingrayDrag...

This is the Traxxas Complete Stock Replacement Carburetor for the Traxxas TRX 2.5 and TRX 3.3 Engines.  A damaged carburetor will severely decrease the power of your engine.  This can restore the lost power.  The...

This is a Traxxas Hard Chrome Suspension Pin Set with E-clips. These are used on the Nitro Rustler, Nitro Slash, Nitro Sport, and Nitro Stampede trucks.Includes:2 - 24X3mm pins4 - 31.5X3mm pins2 - 40X3mm pins2 - 48X3mm pins10 - 3mm e-clips

These are the Traxxas Mounts for the RPM Telemetry Sensor for Nitro Engines. RPM sensor mounts allow you to mount an RPM sensor to your nitro engine. IncludesThree different plastic mountsTwo plastic spacersTwo flat washersTwo split washersTwo hex socket...

This is an optional Traxxas Large Knurled Flywheel for use with Starter Boxes. Features: Large knurles to be gripped by rubber starter wheels Two pin aluminum construction Vent holes drilled to keep clutch shoes cooler Includes: One 40mm...

This is the Traxxas replacement piston and sleeve for the TRX Pro .15 engines. Features: ABC (Aluminum piston with a Brass sleeve or liner that is Chrome plated) Matched set with oil ring Includes:1 Piston1 Sleeve (liner)

This is a pair of Traxxas 5x10x4mm Blue Rubber-Sealed Ball Bearings. These are used on vehicles like the 1/10 E-Revo, Revo 3.3, T-Maxx, Slayer, as well as other vehicles.FeaturesMetal bearing constructionBlue rubber dirt shieldsIncludes: (2) 5X10mm ball...

This is a pair of Traxxas 78mm Turnbuckles.These can be used on:1/10 Monster Jam TrucksCraniacNitro SportRustler XL-5SkullyStampede XL-5 2WD

This is the Traxxas Slipper Tension Spring with Spur Gear Bushing and Locknut.Includes:Slipper tension spring (1)Spur gear bushing (1)4mm Locknut with nylon insert (1) FitsBandit XL-5E-MaxxNitro RustlerNitro SlashNitro SportNitro StampedeRustler...

These are hardened steel drive yokes for the Traxxas Rustler and Stampede. FEATURES:Hardened steel construction and is stronger than stock parts.These yokes also come with U-Joints pre-installed for ease of installation. INCLUDES:Two hardened steel yokes...

This is a pair of 2.8" Twin-Spoke Rear Wheels for the Traxxas Jato 2.5 and 3.3 trucks.  These are stock replacement wheels.FEATURES: Nylon constructionChrome platedFive split spoke wheel patternUses 12mm hex adapterINCLUDES: Two Rear Chrome Wheels

This is a pair of Traxxas 2.8" Black Chrome All Star Wheels mounted with Talon Tires. Talon tires provide "just-right" grip and handling on a wide variety of surfaces. The tires come mounted with foam inserts and pre-glued to tough 2.8″ All-Star...

This is a Traxxas TRX 2.5 and 2.5R Piston and Sleeve kit.  If you have several gallons of fuel through your engine, it may be time for a new piston and sleeve.  It is a direct replacement.  Included are one piston, one...

This is the Hot Racing Aluminum 90mm Heavy Duty Big Bore Shocks (2pcs) 90mm big bore threaded body aluminum shocks for many 1/10th scale off-road vehicles using 90mm shocks. Some applications include, but are not limited to: Traxxas Bandit front, Nitro...

These are the Traxxas XX-Long Titanium-Nitride Coated Hardened Steel Shock Shafts. Each package includes two shocks shafts. These XX-long hardened steel shafts have a super tough titanium nitride coating with a micro-polished finish for smoother...

This is a pair of Traxxas Front White Springs. These fit the front long Ultra Shocks (3760A) on many Traxxas vehicles.Fits:Bandit VXLBandit XL-5Nitro RustlerNitro SlashNitro SportNitro StampedeRustler VXLRustler XL-5Slash 2WD VXLSlash 2WD XL-5

These are the Traxxas Hardened Steel Titanium-Nitride Coated Shock Shafts. These are an excellent upgrade for many Traxxas vehicles.Includes: Two shaftsSpecificationsDiameter: 3mm (0.118")Length: 47 mm (1.85")Thread: 3mm (0.118") Accessory Part ForHoss...

This is the RPM Black Front Shock Tower for the Traxxas Nitro Slash, Nitro Rustler, and Nitro Sport trucks.RPM shock towers for Traxxas 1/10th scale trucks are designed to add strength and support to the front-end suspension components of these great...

This is a pair of Talon Tires from Traxxas for use with the Jato. FEATURES:Talon lug designRubber constructionFoam tire insert INCLUDES:Two Talon 2.8" tiresTwo foam inserts REQUIRES:Jato wheels (TRA5574)Tire Glue, DTXR2002 SPECS:Outer Diameter: 4.6"...

This is a pair of Traxxas 2.2" Rear Lite Truck Wheels (white) for the Jato trucks, as well as the electric Rustler and electric Stampede.  These are 2.2-inches in diameter, have a 12mm hex, and require 2.2" tires. ...

This is the Traxxas Rubber Exhaust pipe Rubber exhaust pipe for Nitro Rustler, Nitro Sport, and Nitro 4-Tec. (Side Exhaust Engines Only) Replacement Part ForTRX Pro .15Nitro Rustler Nitro Sport Nitro 4-Tec

This is the Traxxas aluminum (Red Anodized Shock Caps Shock caps, aluminum (Red-anodized) (4) (fits all Ultra Shocks)Aluminum shock caps are great way to boost the durability and style of any Traxxas vehicle equipped with Ultra Shocks. The machined caps...

These are the Traxxas X-Long Titanium-Nitride Coated Hardened Steel Shock Shafts. Each package includes two shock shafts.For use with X-Long shocks on:1/10 Monster Jam Trucks1/10 RallyBandit VXLBandit XL-5CraniacNitro RustlerNitro SlashNitro SportNitro...

This is the Traxxas aluminum (Orange Anodized Shock Caps Shock caps, aluminum (orange-anodized) (4) (fits all Ultra Shocks)Aluminum shock caps are great way to boost the durability and style of any Traxxas vehicle equipped with Ultra Shocks. The machined...

These are the Traxxas Stainless Steel Suspension Hinge Pins with E-Clips. This set fits the Nitro Rustler, Nitro Slash, Nitro Sport, and Nitro Stampede trucks.Includes:48mm Rear inner hinge pin (2)31.5mm Front and rear outer hinge pin (4)39mm Front...

This is a pair of Traxxas All-Star 2.8" Black Chrome Wheels for use on the front of 2WD electric trucks, front and rear of electric 4x4, and the rear of nitro 2WD trucks.SpecificationsOverall Diameter: 2.8" (71mm)Width: 1.92" (49mm)Includes: Two...

This is the Traxxas Racing Sponsors Decal Sheet Dress up your model’s body with the Traxxas Racing Sponsor Decal Sheet. The decal sheet includes over 25 different full-scale sponsors including, NOS, K&N, Mechanix Wear, Holley, and Hooker...

This is the Traxxas Medium RC Car/Truck Duffle Bag Features Perfect for 1/10 and 1/8 Scale Models Thick, Weather-Resistant Nylon Fabric Heavy Duty Zippers and Stitching Large Outer Pockets for Tools, Parts, and Chargers Reinforced Carry Handles Padded...

This is the Traxxas Official Team Traxxas Racing Decal Set (Flag Logo/ 6-color) The official Team Traxxas Racing Decal sheet has been revised and now includes EZ-Start, Stinger Motors, ProGraphix, TRX engines and www.Traxxas.com logos. Perfect for adding...

This is the RPM Body Skid Rails - fits most 1/5 - 1/12 bodies These Body Skid Rails will fit nearly any scale R/C car or truck. The only requirements are, the surface must be featureless, flat or curved and have a minimum of at least 3" (76.2mm) of open...

This is the GPM Racing Black Stainless Steel and Aluminum Rear CVD Driveshaft Set with 12mm Keyed Hexes for Traxxas 1/10 Slash 4x4, Slash 2WD, Rustler 4x4, Stampede 4x4, and 1/10 Rally VXL vehicles. These feature stainless steel axles and CVD joints,...

This is a pair of RPM Black Revolver 2.2" Wheels for front of the Traxxas Electric Rustler and Electric Stampede 2WD, or the rear of Traxxas nitro vehicles like the Jato, Nitro Rustler, Nitro Sport, and Nitro Stampede. This can also be used on the front...

This is the Rage RC Black Large Gear Bag The Rage R/C Large Gear Bag will fit a 1/8 buggy, drone, truck or boat; and will keep the model safe and your automobile interior clean after a day at the pond, field, trail or track. The bag features a zip top...

This is the Traxxas RC Car/Truck Carrier Backpack Features Thick, Weather-Resistant Nylon Fabric Heavy Duty Zippers and Stitching Large Zippered Front Pockets for Tools and Parts Four-Compartment Battery Organizers Thick Padded Sidewalls Large Side...

This is the Traxxas Shoulder Strap for the #9917 Duffle Bag Add additional carrying support with the strap for your RC Car/Truck Duffle Bag Features Heavy Duty Shoulder Strap for Fuffel Bag with Metal Latches Padded Sleeve For Added Comfort Adjustable...

This is a set of Traxxas Red Aluminum 4mm Flanged Serrated Nuts (4).  These are used as wheel nuts and lock nuts on many Traxxas models. Accessory part forDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.01/16 E-Revo VXL1/16 E-Revo1/16...

This is the GPM Racing Gunmetal Aluminum Front Bumper for Traxxas Rustler 2WD, Stampede 2WD, Bandit and several other vehicles listed below. Made of 6061-T6 aluminum, these are durable and look great.These are replacements for Traxxas part 2735...

This is the RPM Pink Wide Front Bumper for Rustler 2WD, Stampede 2WD, Bandit, Nitro Sport, Nitro Stampede, and Nitro Rustler. On the electric versions, this works with both XL-5 brushed and VXL brushless trucks. This replaces Traxxas part TRA2735.Give...