Nitro Stampede

This is the Traxxas Big Bore Shock Piston Head Set with Mounting Bushings. This set includes two 2-hole pistons, two 3-hole pistons, two shock mounting bushings, and two washers.Includes2- Pistons (2-hole)2- Pistons (3-hole)2- Shock Mounting Bushings2-...

This is a set of Traxxas Long Truck Half-Shafts for the Rustler, Stampede, and Slash 2WD vehicles. Includes:2 white nylon telescoping shaft (each shaft is made of two pieces)4 aluminum U-joints

This is a shock rebuild kit for 2 Traxxas black plastic shocks. Includes:4 E-clips2 C-clips2 O-rings8 Washers2 Diaphrams Replacement Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisChevrolet Corvette StingrayFord F-150 Raptor R 4X4Ford Fiesta ST...

These are the Traxxas Pink Aluminum 4mm Flanged Wheel Nuts (4). These wheel nuts fit a wide variety of Traxxas vehicles. Lightweight and great looking, these 4 mm anodized aluminum flanged lock nuts are the perfect finishing touch for your vehicle. The...

This is a Traxxas Fiberglass Tie Bar for the Nitro Rustler, Stampede, and Bandit. The fiberglass tie bar strengthens the front bulkhead and suspension arms. Requires #2640 suspension pins to complete installation. FEATURES Fiberglass...

This is the GPM Racing Blue Stainless Steel and Aluminum Rear CVD Driveshaft Set with 12mm Keyed Hexes for Traxxas 1/10 Slash 4x4, Slash 2WD, Rustler 4x4, Stampede 4x4, and 1/10 Rally VXL vehicles. These feature stainless steel axles and CVD joints, with...

These are the Traxxas Collars with Set Screws. These come in packages of two.Includes:(2) screw collars(2) 3mm set screws Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 SummitE-MaxxNitro 4-TecNitro RustlerNitro SlashNitro SportNitro StampedeNitro...

This is the RPM Black Front Suspension A-Arm Set for the Electric Bandit, Nitro Rustler, Nitro Stampede, and Nitro Sport vehicles.RPM Rear A-arms for the Traxxas Bandit, Nitro Rustler, Nitro Stampede, and Nitro Sport are finally here to strengthen the...

This is a pair of chrome suspension pins used to hold the front suspension arms on the TRAXXAS SRT, NITRO STAMPEDE, and NITRO RUSTLER. 31.5 mm chrome suspension pins (2). Includes E-clips (4). Replace the stock screw pins with these heavy-duty steel...

This is a pair of the Traxxas XX-Long Ultra Shocks (part 3762A) for use on a wide variety of Traxxas vehicles, including the Bandit, Rustler, Stampede 2WD & 4x4, Slash, Hoss, T-Maxx, and more. Traxxas oil-filled Ultra Shocks utilize X-rings for a...

This is the Traxxas Molex/Tamiya to Receiver Pack Charging Adapter. This adapter allows you to use a charger equipped with a standard Tamiya-style plug to charge receiver batteries.

This is the GPM Joint Rebuild Kit for SSLA1277RH & SSLA1280FH CVD Steel Driveshaft Sets.  Each pack rebuilds two joints. Includes Steel Pin 2x11.7 - 2pcsSpring Coil - 2pcsBlack Collar - 2pcs

These are GPM Replacement Screw Pins for SSLA1277 & SSLA1280 CVD Driveshaft Sets.  Each pack includes two screw pins.

This is a GPM Stainless Steel Replacement Stub Axle and CVD for SSLA1277RHA Driveshafts. *Joint replacement for GPM Racing #SSLA1277RHA only IncludesJoint - 1pcHex - 1pc3x3 Screw Shaft - 1pc

These are the GPM Racing Red Aluminum Rear Suspension Arms for Traxxas 2WD Slash electric trucks, Nitro Rustler, Nitro Slash, and Nitro Stampede.  Made from 6061-T6 aluminum with an anodized finish, these look fantastic and improve durability over...

These are the GPM Racing Orange Aluminum Rear Suspension Arms for Traxxas 2WD Slash electric trucks, Nitro Rustler, Nitro Slash, and Nitro Stampede.  Made from 6061-T6 aluminum with an anodized finish, these look fantastic and improve durability...

These are the GPM Racing Gunmetal Aluminum Rear Suspension Arms for Traxxas 2WD Slash electric trucks, Nitro Rustler, Nitro Slash, and Nitro Stampede.  Made from 6061-T6 aluminum with an anodized finish, these look fantastic and improve durability...

These are the GPM Racing Green Aluminum Rear Suspension Arms for Traxxas 2WD Slash electric trucks, Nitro Rustler, Nitro Slash, and Nitro Stampede.  Made from 6061-T6 aluminum with an anodized finish, these look fantastic and improve durability over...

These are the GPM Racing Black Aluminum Rear Suspension Arms for Traxxas 2WD Slash electric trucks, Nitro Rustler, Nitro Slash, and Nitro Stampede.  Made from 6061-T6 aluminum with an anodized finish, these look fantastic and improve durability over...

These are the GPM Racing Blue Aluminum Rear Suspension Arms for Traxxas 2WD Slash electric trucks, Nitro Rustler, Nitro Slash, and Nitro Stampede.  Made from 6061-T6 aluminum with an anodized finish, these look fantastic and improve durability over...

This is the GPM Racing Black Aluminum Front Shock Tower for Traxxas Slash 2WD, Rustler 2WD, Stampede 2WD, and Bandit vehicles. Made of 6061-T6 aluminum with an anodized finish, these are durable and help make your truck stand out! Stainless steel...

These are the Tekno M6 Driveshafts and Hub Carriers for Traxxas Slash 2WD XL-5 & VXL, Nitro Rustler, Nitro Stampede and  Stampede 2WD (Rear) trucks. This set will give your truck the ultimate in performance and durability. Features: Custom 6mm...

This is a pair of Traxxas Long Steel Shock Shafts with Chrome Finish. These are used in a large number of Traxxas vehicles. Replacement steel shock shafts with chrome finish for Traxxas long Ultra Shocks (2) Replacement Part ForBandit VXLBanditBIGFOOT No...

This is a Traxxas 22-Tooth Clutch Bell for the Traxxas T-Maxx .15, 2.5, 2.5R, 3.3, Revo, Jato, Nitro Rustler, and Nitro Stampede, Nitro 4-Tec.  The higher the number of teeth on your clutch bell, the higher your top speed.  The lower...

This is a Traxxas 18-Tooth Clutch Bell for the Traxxas T-Maxx .15, 2.5, 2.5R, 3.3, Revo, Jato, Nitro Rustler, and Nitro Stampede, Nitro 4-Tec.  The higher the number of teeth on your clutch bell, the higher your top speed.  The lower...

This is the Traxxas Replacement Servo Gear Set for 2055 and 2056 Servos. This is Traxxas part number 2053.

This is the Traxxas Big Bore Hard Anodized Shocks (XX-Long) (2) (Rear) Set of two XX-long Big Bore shocks provide ultimate dampening control. They’re formed from hard-anodized, PTFE-coated, aluminum with titanium-nitride (TiN) coated shafts for...

This is a Stock Replacement Front Bulkhead used in many Traxxas vehicles.  The front suspension arm hinge pins pass through this piece. FEATURES:Gray nylon construction INCLUDES:One front bulkhead REQUIRES:Nothing.  This is a direct replacement...

This is the GPM Racing Green Stainless Steel and Aluminum Rear CVD Driveshaft Set with 12mm Keyed Hexes for Traxxas 1/10 Slash 4x4, Slash 2WD, Rustler 4x4, Stampede 4x4, and 1/10 Rally VXL vehicles. These feature stainless steel axles and CVD joints,...

This is a pair of Assembled and Glued Rear Victory Tires and Wheels for the Traxxas Jato 2.5 and 3.3 trucks.  These are direct replacments for the originals, and if you are running on tar or cement, you know how quickly tires can go. ...

This is the Traxxas 2055 High-Torque Servo.  This has 80 oz/in of torque, making it an excellent steering servo.  This works well in the Traxxas T-Maxx, E-Maxx, Revo or any other vehicle that you would like to mount this in...

This is the GPM Racing Orange Aluminum Front Bulkhead for Traxxas electric Stampede 2WD, Slash 2WD, Rustler 2WD, Bandit, Nitro Slash, Nitro Rustler, and Nitro Stampede trucks.This is a direct fit upgrade for the stock Traxxas part 2530A bulkheads...

These are the Traxxas Rear Stub Axles for the Bandit, Stampede, Rustler, and Slash. Features: Metal construction, black and silver in color Includes: Two rear stub axles and pins Specifications:Length: 1.65" (42mm)Diameter: .51" (13mm) at...

This is the GPM Racing Gunmetal Aluminum Front Shock Tower for Traxxas Slash 2WD, Rustler 2WD, Stampede 2WD, and Bandit vehicles. Made of 6061-T6 aluminum with an anodized finish, these are durable and help make your truck stand out! Stainless steel...

This is the GPM Racing Green Aluminum Front Shock Tower for Traxxas Slash 2WD, Rustler 2WD, Stampede 2WD, and Bandit vehicles. Made of 6061-T6 aluminum with an anodized finish, these are durable and help make your truck stand out! Stainless steel...

This is the GPM Racing Red Aluminum Front Bumper for Traxxas Rustler 2WD, Stampede 2WD, Bandit and several other vehicles listed below. Made of 6061-T6 aluminum, these are durable and look great.These are replacements for Traxxas part 2735.Accessory...

This is a pair of Traxxas Blue Rear Springs for use on XXL Ultra Shocks.Accessory Part ForBIGFOOT No. 1 Officially Licensed ReplicaFord F-150 RaptorHoss 4X4 VXLNitro SlashRustler VXLRustlerSlash 2WD Unassembled KitSlash VXLSlashStampede 4X4 VXLStampede...

This is a set of RPM Black Snap-Tite Body Savers. One of the weakest points on a Lexan body is where the body mounts to the chassis. The holes cut in the body for the body posts have a tendency to crack and fracture. This is the reason RPM designed these...

This is the GPM Racing Blue Aluminum Front Shock Tower for Traxxas Slash 2WD, Rustler 2WD, Stampede 2WD, and Bandit vehicles. Made of 6061-T6 aluminum with an anodized finish, these are durable and help make your truck stand out! Stainless steel...

This is the GPM Racing Green Aluminum Front Bulkhead for Traxxas electric Stampede 2WD, Slash 2WD, Rustler 2WD, Bandit, Nitro Slash, Nitro Rustler, and Nitro Stampede trucks.This is a direct fit upgrade for the stock Traxxas part 2530A bulkheads...