Traxxas Stampede 2WD XL-5 & VXL RC Trucks, Parts & Upgrades
Traxxas Stampede 2WD XL-5 VXL
Do you want something that’s race-ready yet still a great option for beginning model drivers or younger motorsports enthusiasts? If so, then you’re going to want the Stampede XL-5. It’s got a top speed of around 30 MPH measured in real rather than scale miles, so you can be sure that it’s going to offer a ton of real action without sacrificing a whole lot in terms of control.
In many ways, we consider the Traxxas Stampede line to be the original high-performance offload monster truck at the RC Superstore. Best of all, the stock performance figures of this vehicle can be upgraded through judicious use of aftermarket parts.
Traxxas Stampede 2WD Parts & Upgrades
While each of these models offers some serious scale horsepower, you’re eventually going to run into a situation where you might either want some replacement parts or you’re going to need to upgrade one of the underlying components. Perhaps you’ll want to start with a cooling fan or another component that includes comparable moving parts. Since these components rotate, you may want to keep a few extras on hand if you do any real hardcore driving. Motors themselves, however, are what most people are going to be looking into.
2WD Brushless Motors
Waterproof brushless motor assemblies are what makes the Stampede series so attractive. Motor brushes have to be periodically replaced on any design that makes use of them, but Stampede VXL brushless motor systems don’t require any such small parts to be installed. As a result, you can keep your vehicle running longer without having to worry about opening the physical motor housing and making adjustments. This is good news for anyone who wants to start investing in additional motors because they’re going to be seriously racing.
On top of a motor, you might want an extra battery.
Stampede LiPo Battery
Don’t get caught without the power you need to reach further destinations than you ever thought possible. Invest in an additional LiPo battery as well as NiMH/LiPo chargers so you can keep your vehicle out on the road longer. When your current pack runs down, swap it out for a fully charged one and then place it into this dock. It’ll convert mains line power into potential DC energy that your Traxxas model can use in its efficient LiPo batteries.
Stampede VXL
The Stampede VXL uses the Velineon brushless power system, which can push these trucks to over 65 MPH if you’re using LiPo power. Both the XL-5 and VXL trucks include a tri-mode speed controller that offers an optional training mode for those who are just learning to control a model that has this kind of performance. No matter what kind of driver you are, there’s something to appeal to you in these kits.
If you’re still not sure what kind of 2WD Traxxas truck might be right for you, then contact us online at the RC Superstore for more information.
-
TRA3695
Traxxas Complete Transmission for 1/10 2WD Rustler, Bandit, Stampede, Slash
This is the Traxxas Complete Transmission for 1/10 2WD Rustler, Bandit, Stampede, and Slash trucks. This comes pre-assembled with internal gears, slipper clutch, and spur gears, making for an ultra-simply swap to get you back out racing or bashing...$7995 -
TRA3626R
Traxxas ESC/Receiver Box Mounting Plate for Installation of XL-5/VXL & Waterproof Receiver Box on Stampede 2WD
This is the Traxxas ESC/Receiver Box Mounting Plate for Installation of XL-5/VXL & Waterproof Receiver Box on Stampede 2WD. ESC mounting plate for 2WD Stampede models. Replacement part forBIGFOOT No. 1 Officially Licensed ReplicaStampede...$3 -
TRA2380
Traxxas Complete Differential for 1/10 2WD Rustler, Bandit, Stampede, Slash
This is the Traxxas Complete Differential for the electric 1/10 2WD Rustler, Bandit, Stampede, and Slash trucks. This is a great option for a quick and easy diff replacement. Compatible With Bandit VXLBandit XL-5CraniacRustler VXL 2WDRustler XL-5...$1495 -
GPM-SLA2W028-GS
GPM Gunmetal Aluminum Front Shock Tower fits 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Gunmetal Aluminum Front Shock Tower for Traxxas Slash 2WD, Rustler 2WD, Stampede 2WD, and Bandit vehicles. Made of 6061-T6 aluminum with an anodized finish, these are durable and help make your truck stand out! Stainless steel...$1890 -
GPM-SLA2W028-G
GPM Green Aluminum Front Shock Tower fits 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Green Aluminum Front Shock Tower for Traxxas Slash 2WD, Rustler 2WD, Stampede 2WD, and Bandit vehicles. Made of 6061-T6 aluminum with an anodized finish, these are durable and help make your truck stand out! Stainless steel...$1890 -
G3R-T1001-ORANGE
Gen3 RC Orange Aluminum Suspension Upgrade for Traxxas 1/10 2WD Slash Rustler Stampede
This is the Gen3 RC 6061-T6 Orange Aluminum Stage 1 Upgrade Set for the Traxxas Rustler, Stampede 2WD, and Slash 2WD trucks. This set can be used on the XL-5 and VXL versions. Made of 6061-T6 aluminum, these parts are built to improve strength, look...$49.99 $2499 -
GPM-RUS003F-R
GPM Red Aluminum Front Bumper for 2WD Stampede Rustler Bandit
This is the GPM Racing Red Aluminum Front Bumper for Traxxas Rustler 2WD, Stampede 2WD, Bandit and several other vehicles listed below. Made of 6061-T6 aluminum, these are durable and look great.These are replacements for Traxxas part 2735.Accessory...$999 -
TRA3757T
Traxxas Blue Rear Springs (2) for XXL Shocks
This is a pair of Traxxas Blue Rear Springs for use on XXL Ultra Shocks.Accessory Part ForBIGFOOT No. 1 Officially Licensed ReplicaFord F-150 RaptorHoss 4X4 VXLNitro SlashRustler VXLRustlerSlash 2WD Unassembled KitSlash VXLSlashStampede 4X4 VXLStampede...$4 -
HRASSXS4680
Hot Racing Hardened Steel Pinion Gear Set - 24T 26T 28T 30T - 48P, 1/8 Bore
This is the Hot Racing Hardened Steel 48-Pitch 1/8" Bore Pinion Gear Set. This set includes a 24-tooth, 26-tooth, 28-tooth, and 30-tooth pinion gear.This set of gears is great for Traxxas Rustler XL-5, VXL, Stampede 2WD, Slash 2WD, HPI Savage XS, and...$1888 -
TRA3229
Traxxas 2.5x10mm Cap-Head Hex Machine Screws (6)
These are the Traxxas 2.5x10mm Cap-Head Hex Machine Screws. Each package includes six screws.Set of six 2.5x10 mm cap-head machine screws with hex-drive heads Replacement Part For:1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 Summit4-Tec 2.0 AWD...$250 -
RPM80332
RPM Black Snap-Tite RC Car & Truck Body Savers
This is a set of RPM Black Snap-Tite Body Savers. One of the weakest points on a Lexan body is where the body mounts to the chassis. The holes cut in the body for the body posts have a tendency to crack and fracture. This is the reason RPM designed these...$229 -
TRA6868
Traxxas Slash 4X4 Progressive Shock Springs: Rear, +20% Rate, Blue (2)
These are the Traxxas Slash 4X4 Progressive Shock Springs: Rear, +20% Rate, Blue (2) Pair of XX-long progressive-rate springs are custom-wound to provide responsive control over small bumps, with a progressively stiffer rate to absorb hard landings...$650 -
TRA3762
Traxxas 3762 Rear XX-Long Ultra Shocks (Black) Complete with Springs and Spacers (2)
This is the Traxxas Rear XX-Long Ultra Shocks (Black) Complete with Springs and Spacers (2) Traxxas oil-filled Ultra Shocks utilize X-rings for a perfect seal and super-smooth performance. The complete rear set features two pre-assembled black shock...$18 -
TRA3760
Traxxas 3760 Front Long Ultra Shocks (Black) Complete with Springs and Spacers (2)
This is the Traxxas Front Black Long Ultra Shocks complete with Spring Pre-load Spacers and Springs (2) Traxxas oil-filled Ultra Shocks utilize X-rings for a perfect seal and super-smooth performance. The complete front set features two pre-assembled...$18 -
GPM-SLA2W028-B
GPM Blue Aluminum Front Shock Tower fits 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Blue Aluminum Front Shock Tower for Traxxas Slash 2WD, Rustler 2WD, Stampede 2WD, and Bandit vehicles. Made of 6061-T6 aluminum with an anodized finish, these are durable and help make your truck stand out! Stainless steel...$1890 -
TRA3655G
Traxxas HD Green Front/Rear Suspension Arms (2) for 4x4 Slash Rustler Stampede
These are the Traxxas Heavy Duty Green Front or Rear Suspension A-Arms (2) for 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, and XO-1 cars. These can be used as a rear arm upgrade for Stampede 2WD and Rustler 2WD trucks as well. This is a direct...$12 -
GPM-CRA332F-G
GPM Green Aluminum Front Bulkhead for 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Green Aluminum Front Bulkhead for Traxxas electric Stampede 2WD, Slash 2WD, Rustler 2WD, Bandit, Nitro Slash, Nitro Rustler, and Nitro Stampede trucks.This is a direct fit upgrade for the stock Traxxas part 2530A bulkheads...$1999 -
GPM-RUS019-B
GPM Blue Aluminum Caster Blocks for 2WD Stampede Rustler Slash
These are the GPM Racing Blue Aluminum Caster Blocks for Traxxas electric Slash 2WD, Stampede 2WD, Rustler 2WD, and others vehicles listed below. Machined from 6061-T6 aluminum, these are a great way to add strength, tighten up handling, and dress up...$1399 -
TRA3757A
Traxxas Green Rear Springs (2) for XXL Shocks
This is a pair of Traxxas Green Rear Springs for XXL Rear Ultra Shocks on trucks such as the Rustler, Slash 2WD, and Stampede.Accessory Part ForBIGFOOT No. 1 Officially Licensed ReplicaFord F-150 RaptorHoss 4X4 VXLNitro SlashRustler VXLRustlerSlash 2WD...$5 -
HRACSG1827
Hot Racing 27-Tooth 48P Hardened Steel 1/8 Bore Pinion Gear
This is the Hot Racing 27-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:Standard 4140 steel and heat treatedHeavy duty 4mm set screw for brushless powerYOU WILL...$544 -
RRP8714
Robinson Hard Steel 14T Pinion - 5mm Bore 0.8 Mod (31.75P)
This is the Robinson Racing Extra Hard Steel 14-Tooth 0.8 Mod Pinion Gear with 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless, and Summit...$849 -
TRA2975
Traxxas 4-Amp DC Charger for 7.2-8.4V NiMH iD Batteries
This is the Traxxas 4-Amp DC Charger. This charger can be used with 6-cell 7.2V and 7-cell 8.4V NiMH Traxxas iD Batteries.FeaturesTraxxas's iD technology automatically configures and optimizes charge settings for Traxxas iD equipped 6-7 cell NiMH...$2495 -
TRA3792
Traxxas Transmission Gear Dust Cover w/Screws (Telemetry-Ready)
This is the Traxxas Transmission Gear Dust Cover Set with Screws for the Bandit, Rustler, Slash 2WD, and Stampede 2WD trucks. This set is designed to accommodate telemetry sensors.IncludesTransmission Gear Dust Cover3x6 mm round head screws (to mount...$350 -
TRA3760A
Traxxas 3760A Long Ultra Shocks (Gray) with Springs (2)
This is a pair of Traxxas Long Gray Ultra Shocks, Complete with Springs, Pre-Load Spacers, and Shock Oil. Traxxas oil-filled Ultra Shocks utilize X-rings for a perfect seal and super-smooth performance. Features two pre-assembled gray shock bodies...$18 -
TRA4976
Traxxas Wheelie Bar Wheels & Axles: T-Maxx 3.3
These are the Wheelie Bar Wheels for the Traxxas 3.3 T-Maxx. FEATURES:Constructed of hard plasticAxles constructed of steel INCLUDES:Four wheels and two axles REQUIRES:Installing on wheelie bar SPECS:Thickness: 0.39" (10mm)Diameter: 1.02" (26.1mm)$4 -
TRA2416
Traxxas 48P Pinion Gear w/Set Screw: 16T
This is the 16-T Pinion (48-pitch) Gear with Set Screw 16-tooth pinion gear (48-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance...$350 -
GPM-SLA055-S
GPM Silver Aluminum Lower Suspension Arm for Front/Rear 4x4 Slash Stampede, Rear of 2WD Stampede & Rustler
These are the GPM Racing Silver Aluminum Lower Suspension Arms for the Front or Rear of the Traxxas 1/10 Slash 4x4, Stampede 4x4, Rustler 4x4, XO-1, or the rear of the Stampede 2WD and Rustler 2WD vehicles. These are made of 6061-T6 aluminum for improved...$2390 -
GPM-SLA055-GS
GPM Gunmetal Aluminum Lower Suspension Arm for Front/Rear 4x4 Slash Stampede, Rear of 2WD Stampede & Rustler
These are the GPM Racing Gunmetal Aluminum Lower Suspension Arms for the Front or Rear of the Traxxas 1/10 Slash 4x4, Stampede 4x4, Rustler 4x4, XO-1, or the rear of the Stampede 2WD and Rustler 2WD vehicles. These are made of 6061-T6 aluminum for...$2390 -
GPM-CRA332F-R
GPM Red Aluminum Front Bulkhead for 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Red Aluminum Front Bulkhead for Traxxas electric Stampede 2WD, Slash 2WD, Rustler 2WD, Bandit, Nitro Slash, Nitro Rustler, and Nitro Stampede trucks.This is a direct fit upgrade for the stock Traxxas part 2530A bulkheads...$1999 -
RPM80385
RPM Blue Rear Bearing Carrier for Traxxas 2WD
These are the RPM Blue Rear Bearing Carriers for Traxxas Slash 2WD, Rustler XL-5 & VXL, Stampede 2WD XL-5 & VXL, and Bandit buggies. This replaces Traxxas 3752 bearing carriers, and requires use of 5x11x4mm bearings.Identical in strength and performance...$679 -
RPM73765
RPM Blue ESC Cage for Castle Mamba X on Traxxas
This is the RPM Blue ESC Cage to use the Castle Mamba X ESC on Traxxas Slash 2WD, Slash 4x4, Stampede 4x4, and 1/10 Rally VXL. This can also be used on the Rustler, Stampede 2WD, and Bandit when the Traxxas 3725 mounting plate is on the vehicle (stock...$749 -
TRA3355R
Traxxas VXL-3S Velineon Waterproof ESC
This is the Traxxas Velineon VXL-3S Velineon Waterproof ESC. This is the replacement for the ESC found in many of the 1/10 brushless trucks, designed for use with the Velineon 3500 motor. See full list of compatible trucks below.The Velineon VXL-3s...$10995 -
TRA3621
Traxxas Front Bumper, Mount, and Hardware for Stampede 2WD Series
This is the Traxxas Black Front Bumper, Mount, and Hardware for the Stampede 2WD, Craniac, Skully, and 1/10 Monster Jam Trucks.Fits1/10 Monster Jam TrucksCraniacSkullyStampede 2WD$5 -
TRA1675
Traxxas Self-Lubricating 5x11x4mm Bushings (14)
These are the Traxxas Self-Lubricating 5x11x4mm Bushings (14). These are Traxxas part 1675.FeaturesMade of metalIncludes: 14 bushingsSpecifications: 5x11x4mmComments: These bushings would work on any vehicle using 5x11x4mm bushings. Fits1/10 Monster...$5 -
RPM80912
RPM Black Motor Protector for Slash 2WD, Rustler, Stampede 2WD, Bandit
This is the RPM Black Motor Protector for the Traxxas Slash 2WD, Rustler, Stampede 2WD, and Bandit vehicles. This is designed to be used in place of the bumper or wheelie bar. See Tech Notes at bottom for more information.Many Traxxas electric vehicles...$499 -
TRA6538
Traxxas Telemetry Spur Gear Trigger Magnet Holders
These are the Traxxas Telemetry Trigger Magnet Holders for the TQi radio system. The telemetry trigger magnet holders secures the trigger magnet to the spur gear to provide real-time RPM and speed data when combined with an RPM sensor, TQi radio with...$3 -
RRP8724
Robinson Extra Hard 5mm Bore 24T Pinion 0.8 Mod (31.75P)
This is the Robinson Racing Extra Hard 24-Tooth 0.8 Mod (31.75P) Pitch Pinion Gear with a 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless,...$849 -
TRA2938X
Traxxas iD LiPo Battery Balance Adapter for Cell Voltage Checkers
This is the Traxxas iD LiPo Battery Balance Adapter for Cell Voltage Checkers. This works with 2S, 3S, and 4S ID LiPo batteries to connect them to cell voltage checkers for individual cell reading. Warning: These are not intended for charging. The...$12 -
GPM-SLA2W030-G
GPM Green Aluminum Rear Shock Tower for 2WD Stampede Rustler Slash
This is the GPM Racing Green Aluminum Rear Shock Tower for Traxxas Slash 2WD, Rustler 2WD, and Stampede 2WD trucks. Made of 6061-T6 aluminum with an anodized finish, these are durable and help make your truck stand out! Stainless steel mounting hardware...$2190 -
TRA3767P
Traxxas Pink Aluminum Shock Caps (4) for all Ultra Shocks
This is the Traxxas aluminum (pink Anodized Shock Caps Shock caps, aluminum (pink-anodized) (4) (fits all Ultra Shocks)Aluminum shock caps are great way to boost the durability and style of any Traxxas vehicle equipped with Ultra Shocks. The machined...$14