XRT

This is the GPM Green Aluminum Front/Rear Gearbox Cover FeaturesAluminum upgraded gear box anodized in color Accessory Part ForX-MaxxXRT

This is the GPM Black Aluminum Front/Rear Gearbox Cover FeaturesAluminum upgraded gear box anodized in color Accessory Part ForX-MaxxXRT

This is the GPM Blue Aluminum Front/Rear Gearbox Cover FeaturesAluminum upgraded gear box anodized in color Accessory Part ForX-MaxxXRT

This is the Traxxas 25-T Pinion Gear (1.0 metric pitch) / Set Screw 25-tooth pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw. (For use with steel spur gears) Traxxas pinion gears let you fine-tune the performance of your...

These are the GPM Racing Orange Aluminum Chassis Nerf Bars for Traxxas X-Maxx trucks. Made of 6061-T6 aluminum with an anodized finish, these are super durable and look awesome installed. Stainless steel mounting hardware is included.These fit in place...

This is the Traxxas Differential Carrier with Gaskets. This works on the front or rear of the truck. FeaturesMolded composite plastic constructionIncludesDifferential CarrierTwo X-Ring GasketsTwo Ring Gear Gaskets Replacement part for these...

This is a set of Traxxas Axle Pins.These pins go through the stub axles on each wheel, the wheel hubs are then placed over these pins. Features: Axle pins are steel Includes: Four 2.5x12mm axle pins Replacement part for these modelsRevoSlayer...

This is a package of six 3x10mm Traxxas Countersunk Hex Head Screws. FEATURES Steel construction, Black in color Used on the Traxxas Revo monster truck, can also be used in any application where a 3x10mm countersunk screw is...

This is a set of two (2) Traxxas 4mm x 7mm x 2.5mm Blue Rubber Shielded Ball Bearings.  These are factory replacements.  These fit several Traxxas models.

This is the GPM Green 7075 Alloy Front Caster Blocks C-Hubs (Green) 7075 high-end alloy material, anodizing for durability, corrosion resistance, and aesthetics, lasered with "R" and "L" Symbol. Replaces Stock Part # 7732 Accessory Part For X-MAXXX-MAXX...

This is the Traxxas X-Maxx Green Aluminum Motor Mount Washer and Screw Set. This set includes four washers and four screws. Aluminum washers add additional strength and good looks to the motor mounts in the X-Maxx® chassis. Includes 4x18 mm screws...

This is the Traxxas X-Maxx Aluminum Center Driveshaft Assembly and steel double-sided gear.Features Aluminum construction with natural silver colored finish Double sided steel gear meshes with transmission output gear IncludesCenter DriveshaftSteel...

These are the Traxxas 3x25mm Buttonhead Hex Machine Screws. Each package includes six screws.Replacement part for these modelsE-Revo VXL BrushlessMaxxRevoSlayer Pro 4X4SledgeSummitTRX-4 1972 Chevrolet Blazer High Trail EditionTRX-4 1979 Chevrolet...

This is the GPM Stainless Steel Chassis Protection Plate Set Made with 304 stainless steel the preotection plate offers increased protection for the front, center and rear chassis. It offers enhanced chassis robustness with an anti-collision sponge...

This is the Traxxas Washers Motor mount Aluminum (Orange-Anodized) (4)/ 4x18mm BCS (4) Aluminum washers add additional strength and good looks to the motor mounts in the X-Maxx chassis. Includes:  (4) 4x18 mm screws Accessory Part ForX-MaxxXRT

This is the Traxxas Washers Motor mount Aluminum (Gray-Anodized) (4)/ 4x18mm BCS (4) Aluminum washers add additional strength and good looks to the motor mounts in the X-Maxx chassis. Includes: (4) 4x18 mm screws Accessory Part ForX-MaxxXRT

This is the Traxxas Splined Wheel nuts 17mm, Serrated (Gray-Anodized) (4) Set of four 17 mm wheel nuts are serrated for extra bite on the wheel to keep them snug no matter how intense the action gets. The beautiful anodized finish combines eye-catching...

This is the Traxxas Aluminum Caster Blocks (Left and Right) (Red). Traxxas aluminum caster blocks (C-hubs) improve the appearance, ruggedness, and control of your X-Truck. The hubs are carefully machined from a block of 6061-T6 aluminum to add strength...

This is the Traxxas Aluminum Caster Blocks (Left and Right) (Orange). Traxxas aluminum caster blocks (C-hubs) improve the appearance, ruggedness, and control of your X-Truck. The hubs are carefully machined from a block of 6061-T6 aluminum to add...

This is the Traxxas Aluminum Caster Blocks (Left and Right) (Green). Traxxas aluminum caster blocks (C-hubs) improve the appearance, ruggedness, and control of your X-Truck. The hubs are carefully machined from a block of 6061-T6 aluminum to add strength...

This is the Traxxas Aluminum Caster Blocks (Left and Right) (Gray). Traxxas aluminum caster blocks (C-hubs) improve the appearance, ruggedness, and control of your X-Truck. The hubs are carefully machined from a block of 6061-T6 aluminum to add strength...

This is the Traxxas Aluminum Caster Blocks (Left and Right) (Blue). Traxxas aluminum caster blocks (C-hubs) improve the appearance, ruggedness, and control of your X-Truck. The hubs are carefully machined from a block of 6061-T6 aluminum to add strength...

This is the Traxxas XRT Stainless Steel Hardware Kit. Give your XRT a complete upgrade with this stainless steel hardware kit. The hardware kit replaces the standard hardware on your XRT with stainless steel hardware for long-lasting performance in wet...

This is the Traxxas XRT Hardware Kit. Give your XRT a complete refresh with this replacement hardware kit. Traxxas hardware kits replace the screws and fasteners on your vehicle with new factory-fresh hardware. Individual compartments keep everything...

This is the Traxxas X-Truck Bearing Kit. Restore your X-Maxx or XRT to peak performance with this bearing kit. The bearing kit swaps out the standard bearings with new factory-fresh replacements. Individual compartments keep everything organized in the...

This is the Traxxas Motor Mounts 6061-T6 Aluminum Red-Anodized (Front & Rear) Aluminum Motor MountsAdd strength and style to your X-Truck with these aluminum motor mounts. The mounts are machined from tough 6061-T6 aluminum for unbeatable toughness...

This is the Traxxas 6061-T6 Aluminum (Green-Anodized) Wheelie Bar Wheels (for #7776, 8976 or 9576 Wheelie Bars) Machined from tough 6061-T6 aluminum and hard-anodized in brilliant eye-catching colors, these wheelie bar wheels are the perfect finishing...

This is the Traxxas 6061-T6 Aluminum (Red-Anodized) Wheelie Bar Wheels (for #7776, 8976 or 9576 Wheelie Bars) Machined from tough 6061-T6 aluminum and hard-anodized in brilliant eye-catching colors, these wheelie bar wheels are the perfect finishing...

This is the Traxxas 6061-T6 Aluminum (Orange-Anodized) Wheelie Bar Wheels (for #7776, 8976 or 9576 Wheelie Bars) Machined from tough 6061-T6 aluminum and hard-anodized in brilliant eye-catching colors, these wheelie bar wheels are the perfect finishing...

This is the Traxxas 6061-T6 Aluminum (Dark Titanium-Anodized) Wheelie Bar Wheels (for #7776, 8976 or 9576 Wheelie Bars) Machined from tough 6061-T6 aluminum and hard-anodized in brilliant eye-catching colors, these wheelie bar wheels are the perfect...

This is the Traxxas 6061-T6 Aluminum (Blue-Anodized) Wheelie Bar Wheels (for #7776, 8976 or 9576 Wheelie Bars) Machined from tough 6061-T6 aluminum and hard-anodized in brilliant eye-catching colors, these wheelie bar wheels are the perfect finishing...

These are the Traxxas Rubber Tires for #7775X Wheelie Bar Wheels Rubber wheelie bar tires look great and provide better grip than standard hard plastic wheels. Fits: 7775X wheelie bar wheels Accessory Part ForMaxxSledgeX-MaxxXRT

This is the GPM Medium Carbon Steel Spur Gear (35T) Outer diameter of spur gear 55.5mm IncludesSpur Gear 35T - 1pc Replaces Stock Part #s: 6447X, 6448X, 6449X Accessory Part ForX-MaxxXRT  

This is the Traxxas Steering Blocks Left & Right These left and right steering blocks were redesigned and beefed-up for XRT. Standard in XRT, they can be used to upgrade X-Maxx for extreme duty and maximum strength. Steering blocks require 5196A...

This is the Traxxas 50 Tooth Wide-Face Spur Gear (20-T Pinion) The 50-tooth spur gear and 20-tooth pinion gear combo (1.0 metric pitch) is machined from hardened steel with extra-wide steel teeth for ultimate power handling and durability. Traxxas spur...

This is the Traxxas 54-Tooth Spur Gear (Hardened Steel) 54-tooth spur gear (1.0 metric pitch) is machined from hardened steel with extra-wide steel teeth for ultimate power handling and durability. Traxxas spur gears let you fine-tune the performance of...

This is the Traxxas 50-Tooth Spur Gear (Hardened Steel) 50-tooth spur gear (1.0 metric pitch) is machined from hardened steel with extra-wide steel teeth for ultimate power handling and durability. Traxxas spur gears let you fine-tune the performance of...

This is the Traxxas 46-Tooth Spur Gear (Hardened Steel) 46-tooth spur gear (1.0 metric pitch) is machined from hardened steel with extra-wide steel teeth for ultimate power handling and durability. Traxxas spur gears let you fine-tune the performance of...

This is the GPM Medium Carbon Steel Center Differential Output Gear 51T Made by medium carbon steel, this will add more strength and durability. Replaces Traxxas part number: TRA7784X IncludesCenter Diff Output Gear 51T (1) Accessory Part ForX-MaxxXRT

This is the GPM Black 40cr Steel Motor Gear 30T IncludesMotor Gear 30T (1)4x6 Screw Shaft (1) SpecificationsMotor Tooth Diameter: 8mmMotor Gear Hole: D-shapedModule: 1.5mmMumber of Teeth: 30TTooth Surface Width: 9mmOuter Diameter: 48mm Accessory Part...