Traxxas

This is the Chassis Brace for the Traxxas Revo 3.3. FEATURES Constructed of 0.12" (3mm) thick 6061 T-6 aluminum Anodized blue in color INCLUDESChassis Brace and 4x16mm hex head...

These are the Chassis Braces for the Traxxas New T-Maxx 3.3 4WD Nitro Monster Truck RTR. FEATURES Nylon construction, black in color Replaces worn or damaged chassis braces INCLUDESOne Set of...

These are a set of Traxxas 2.8" Mounted All Star Front Wheels and Tires for the front of the Nitro Stampede or Nitro Rustler. FEATURES 2.8" All Star chrome wheels Talon tires and foam...

These are the Chrome Twin Spoke 2.8" Rear Wheels for the Traxxas Jato 3.3. FEATURES Nylon construction Chrome plated Ten spoke wheel pattern, spokes are in groups of two Uses 12mm hex...

These are the 3.5mm Male Bullet Connectors from Traxxas. FEATURES Gold plated INCLUDESThree male bullet connectors with heat shrink and instruction sheet REQUIRESSolder and soldering...

This is the Traxxas planet & Sungears, Shaft: N, NB, NRU,SLH

These are a set of Traxxas 2.8" Talon Tires Mounted on All Star Wheels. These will fit the front of the electric Stampede 2WD and Rustler, Front & Rear of the Stampede 4x4, or the rear of the...

This is the optional Traxxas Revo Tuned Pipe with Resonator FEATURES Designed for use with the Traxxas Revo and Slayer when fitted with the TRX racing engine Dual chamber enhances mid to high RPM...

These are the Rear Red Assembled Tires and Wheels from Traxxas FEATURES Rubber construction, SCT off-road design 5 spoke satin chrome wheels Red beadlock Dual profile INCLUDESTwo Rear Assembled...

This is the Brake Yoke w/Pins for the Traxxas Revo. It is use on the Center/Front Driveshaft Assembly. FEATURES:Plastic Brake YokeSteel Brake Pins(each knurled on one end)Steel Screw...

This is the optional Traxxas Reverse Kit for the Traxxas Revo 3.3 trucks that do not use the Opti Drive module. All the parts you need, even the 2060 sub-micro servo, are included, getting you back...

This is the Long Wheelbase Chassis for the Traxxas E-Maxx. FEATURES:Nylon construction, gray in colorReplaces worn or damaged chassis INCLUDES:One long wheelbase chassis REQUIRES:Installation on the...

This is a set of Rear Only 2.8" Mounted All Star Wheels and Tires for the electric Traxxas Stampede. FEATURES:2.8" All Star black chrome wheelsTalon tires with foam inserts INCLUDES:Two 2.8" mounted...

This is the optional Single Motor Plate for the Traxxas E-Revo TRAC07**. FEATURES:Aluminum construction, blue in colorDesigned for a clean install of a single brushless motor system in the E-Revo RTR...

This is the optional Traxxas Resonator Dyno-Tuned Performance Pipe for the Jato FEATURES:The Traxxas Resonator aluminum tuned pipe for Jato is specifically engineered to fit right in the chassis and...

This is the Wheelie Bar Arm for the T-Maxx 3.3. FEATURES:4 snap-in adjustment positions to control degree of wheelie action easily removable if additional control isn't neededConstructed of hardened...

This is a package of Progressive Rate Shock Springs from Traxxas for use with the Traxxas Ultra Shocks set only. These may be used on either the front or rear of the T-Maxx 3.3. FEATURES:Steel...

This is a 28-tooth 48-pitch replacement Pinion Gear for the Traxxas Slash 2WD and other vehicles. FEATURES:Metal construction. INCLUDES:One Pinion GearOne Set Screw SPECS:Teeth: 28Pitch: 48

These are 5mm Nylon Locknuts by Traxxas. FEATURES:Blue anodized aluminum construction.Nylon inserts. INCLUDES:Four 5mm locknuts. SPECS:Thickness: 4.95mm (.195")

This is the Stock Replacement Clutch Shoes and Spring for the Nitro Stampede. These shoes are locatedunderneath the clutchbell. FEATURES:Black in color INCLUDES:Two clutch shoesOne wrap around...

These are the Replacement Bulkhead Cross Braces for the Traxxas E-Maxx. These Braces are located in between the bumper mounts. FEATURES:Black nylon construction INCLUDES:Two Bulkhead Cross...

This is the optional 39mm Aluminum Front Turnbuckle Set from Traxxas. FEATURES:Anodized aluminum construction, red in colorBlack nylon ball ends and steel link set INCLUDES:One 39mm red aluminum...

These bearings may be used with Traxxas vehicles or on whatever vehicle they will fit. PACKAGE INCLUDES:2-Bearings SPECS:5x8x2.5mm FEATURES:The bearing are constructed of stainless steel Replacement...

Traxxas Big Bore shocks provide ultimate damping control. They’re hard-anodized, Teflon®-coated and have large cylinders for greater oil capacity. These shocks also include our super smooth, long...

This is the Micro Servo for the Traxxas Revo Truck, TRAC71**.  This is the servo than connects to the shift linkage. FEATURES:Fits in the Left Electronics Box and controls shifting of the...

This is the Replacement Gear for the optional Center Differential Kit (TRA5414) for the Traxxas Revo. FEATURES:Nylon construction INCLUDES:Gear, two ring seals, gasket and instruction...

This is the Torque Control Slipper Upgrade Kit for the Traxxas T-Maxx. FEATURES:Metal and plastic construction INCLUDES:One torque control slipper upgrade kit without OptidriveInstallation...

This is the replacement Starter Shaft for the T-MAXX 2.5 engine. FEATURES:Steel Construction INCLUDES:One shaft REQUIRES:Traxxas 2.5 T-MAXX engine SPECS:Length: 25.4 mm (1")Diameter: 18.2 mm (0...

This is the replacement Recoil String for use with the Traxxas 2.5/2.5R recoil starters. FEATURES:Direct replacementNylon construction INCLUDES:One replacement recoil starter...

This is a Traxxas Jato 2.5 and 3.3 Primary Shaft and One-Way Bearing.FEATURES:Metal ConstructionInstalls in gearbox behind the primary clutch assemblyINCLUDES:One Metal Primary ShaftOne One Way...

This is the Clutch Guard for the Traxxas Nitro Jato Stadium Truck. FEATURES:Nylon constructionBlack in color INCLUDES:One Nylon Clutch Guard REQUIRES:Assembly onto vehicle

This is a set of Anti-Roll Bars and Linkages for use with the Traxxas Jato 3.3, TRAC83**. These are mounted onto the front and rear of the vehicle and help make the vehicle more responsive to...

This is the replacement 2-Speed Gear Set for the Traxxas Jato 2.5 and 3.3 trucks.FEATURES: Steel and nylon construction, black in colorINCLUDES: 17 Tooth metal pinion gear.29 Tooth plastic spur...

This is the Rubber Plug and Charge Jack for the Traxxas Nitro Jato Stadium Truck. FEATURES:Rubber constructionBlack in color INCLUDES:One Rubber Transmission PlugOne Rubber Charge Jack...

This is a set of Traxxas Jato 2.5 and 3.3 Differential and Transmission Gaskets. FEATURES: Rubber constructionBlack and Blue in color INCLUDES: Two Transmission GasketsOne Differential...

This is the Differential Cover for the Traxxas Nitro Jato Stadium Truck. FEATURES:Nylon constructionBlack in color INCLUDES:One Differential Cover REQUIRES:Assembly onto Vehicle

This is a Traxxas Jato Differential Gear Set for the Jato 2.5 and 3.3 trucks.FEATURES:Nylon constructionBlack in colorINCLUDES: One Differential Gear 38TOne Differential Side CoverOne...

This is the Traxxas Anaconda 2.8" Front Tire set for use on the Jato 2.5 or 3.3 vehicle. FEATURES:Rubber Anaconda tiresSplit X-Pattern treadFoam inserts INCLUDES:Two Jato front...

These are glued Front All Star Chrome Wheels and Anaconda Tires w/Foam Inserts for the Traxxas Jato. FEATURES:Wheels are made of chrome coated plastic INCLUDES:(2) Pre-mounted Tires and...

This is a pair of the Traxxas 2.8" Rear Chrome All Star Wheels with Anaconda Tires and Foam Inserts  Anaconda performance street tires feature a specially formulated tire compound providing...