Traxxas

This is a Traxxas T-Maxx Slide Carb Linkage Set, including the throttle link, brake link, and hardware. This works on T-Maxx 2.5 and 3.3 trucks with a slide carb.IncludesOne long linkage wire...

This is a pair of Traxxas Jato 2.5 and 3.3 Throttle Return Springs.  You don't want to run a truck without this on it.

This is replacement Traxxas Fuel Tank Pull Ring, Cap, and Shutoff Clamp for the Revo 2.5 and 3.3 trucks.  If you need the entire fuel tank, search our store for TRA5363.

This is a Traxxas Heavy Duty Servo Saver Spring for the Revo 2.5 and 3.3.  This servo saver spring should be used when using metal geared servos.

This is a Traxxas Revo Transmission Skid Plate and Roll Hoop Set for the Traxxas Revo 2.5 and 3.3 trucks.  If you crack or break these, you should always fix them.  Without fixing...

This is the Traxxas Complete Stock Replacement Carburetor for the Traxxas TRX 2.5 and TRX 3.3 Engines.  A damaged carburetor will severely decrease the power of your engine...

This is a Traxxas Lower Chassis Brace Set for the Traxxas T-Maxx .15, 2.5, S-Maxx, Stadium Maxx, and E-Maxx (model 3906).  These are stock replacements...

This is the Traxxas 6061-T6 Aluminum (Red-Anodized) Gear Cover Add strength and style to your Maxx Slash with this aluminum gear cover. The gear cover is machined from tough 6061-T6 aluminum for...

This is the Traxxas 6061-T6 Aluminum (Green-Anodized) Gear Cover Add strength and style to your Maxx Slash with this aluminum gear cover. The gear cover is machined from tough 6061-T6 aluminum for...

This is the Traxxas 6061-T6 Aluminum (Gray-Anodized) Gear Cover Add strength and style to your Maxx Slash with this aluminum gear cover. The gear cover is machined from tough 6061-T6 aluminum for...

This is the Traxxas 6061-T6 Aluminum (Blue-Anodized) Gear Cover Add strength and style to your Maxx Slash with this aluminum gear cover. The gear cover is machined from tough 6061-T6 aluminum for...

This is the Traxxas 6061-T6 Aluminum (Orange-Anodized) Gear Cover Add strength and style to your Maxx Slash with this aluminum gear cover. The gear cover is machined from tough 6061-T6 aluminum for...

This is the Traxxas (1979) Ford F-150 Clear Body with Accessories (Includes grille, side mirrors, door handles, windshield wipers) From mild to wild, Traxxas clear bodies are your own personal canvas...

This is the Traxxas (1979) Chevrolet K10 Truck Clear Body with Accessories (Includes grille, side mirrors, door handles, windshield wipers) From mild to wild, Traxxas clear bodies are your own...

This is the Traxxas TRX-4m 6061-T6 Aluminum (Black-Anodized) 1″ Beadlock Wheels Take your TRX-4M to the next level with these black-anodized aluminum beadlock wheels. Made from tough 6061-T6...

This is the Traxxas TRX-4m 6061-T6 Aluminum (Silver-Anodized) 1″ Beadlock Wheels Take your TRX-4M to the next level with these silver-anodized aluminum beadlock wheels. Made from tough 6061-T6...

This is the Traxxas Front Clipless Body Mount Adapter with Inserts Front clipless body mount adapter with inserts (2) Replacement Part ForFord F-150 Raptor R 4X4

This is the Traxxas Caster Blocks Left & Right (C-Hubs) These left and right caster blocks (C-hubs) were redesigned and beefed-up for XRT. Standard in XRT, they can be used to upgrade X-Maxx for...

This is the Traxxas Front or Rear Center Driveshafts Rebuild Kit (Steel Constant-Velocity) For #9655X steel CV driveshafts Rebuild kit for 9655X steel CV center driveshafts includes hardware to...

This is the Traxxas Center Assembled Driveshaft (Steel Constant-Velocity) Give your Sledge the ultimate driveline upgrade with these heavy-duty center CV (constant velocity) driveshafts. Made from...

This is a set of four Traxxas TRX-4 Black Aluminum 2.2" Beadlock Rings with 2x10 Capscrews (48) for use with Traxxas 2.2" Beadlock Wheels, such as the Method 105 wheels. Accessory Part ForTRX-4...

This is a set of four Traxxas TRX-4 Satin Aluminum 2.2" Beadlock Rings with 2x10 Capscrews (48) for use with Traxxas 2.2" Beadlock Wheels, such as the Method 105 wheels.Accessory Part ForTRX-4...

These are the Traxxas TRX-4 Rear Heavy Duty Chromoly Axles. These are for use with the TRA8065 machined rear portal input drive gears.Accessory Part ForTRX-4 Crawler KitTRX-4 Ford BroncoTRX-4 Land...

These are the Traxxas TRX-4 Front Heavy Duty Chromoly Left and Right Axle Shafts. These can only be used with the TRA8064 machined portal drive input gear.Accessory Part ForTRX-4 Crawler KitTRX-4...

This is the Traxxas E-Revo 2 Heavy-Duty Differential Carrier, Gaskets and Spacers. This includes the diff carrier, 2 X-ring gaskets, ring gear gasket, 4 spacers, and 12.2x18x0.5 washer.Stock...

These are the Traxxas Unlimited Desert Racer Planetary Gears (4).Stock Replacement OnUnlimited Desert Racer (UDR)

This is the Traxxas Unlimited Desert Racer Rigid Edition Body Decal Set.Stock Replacement OnUnlimited Desert Racer (UDR)

This is a set of four Traxxas Green Aluminum 5mm Flanged Serrated Nylon Locking Nuts for the Unlimited Desert Racer.Accessory Part ForUnlimited Desert Racer (UDR)

These are the Traxxas TRX-4 Inner Fenders, Rock Light Covers, Battery Plate and 3x8 Screws (4). This is the stock set found on the TRX-4 Ford Bronco. Front and rear inner fenders for the TRX-4 with...

This is a pair of Traxxas TRX-4 White Stripe 0.30 Rate GTS Shock Springs (natural finish).Accessory Part ForTRX-4 Crawler KitTRX-4 Ford BroncoTRX-4 Land RoverTRX-4 Tactical

This is the Traxxas 4-Tec 2.0 Ford GT Blue Pre-Painted Body with Decals. This body is even pre-cut, making for quick final installation!Note: Tail lights, exhaust tips, & mounting hardware (Traxxas...

This is the Traxxas 4-Tec 2.0 Rear Bumper and Rear Body Mount Set. This is used on both the Ford GT and Mustang GT versions.Fits4-Tec 2.0

This is the Traxxas 4-Tec 2.0 Front Upper and Lower Bumper Set. This is used in both the Ford GT and Mustang GT version.Fits4-Tec 2.0

This is the Traxxas 4-Tec 2.0 Sealed Receiver Box, Cover, Servo Mount and Hardware. This fits both Ford GT and Mustang GT versions.IncludesSealed receiver boxSteering servo mountReceiver coverAccess...

This is the Traxxas 4-Tec 2.0 Front and Rear Body Mount Set, for use with #8311 series Ford GT bodies.Fits4-Tec 2.0

These are the Traxxas TRX-4 Crawler Left and Right Front Inner Portal Drive Housings and 2.5x4mm Screws (6).FitsTRX-4

This is a pair of Traxxas X-Maxx GTX Assembled 110mm Steel Shock Shafts with rod ends and hollow balls.FeaturesSteel construction with chrome finishComposite plastic rod ends and pressed-in ...

This is the Traxxas Caps and spring retainers, GTR long/xx-long shock (upper cap (2)/ hollow balls (4)/ bottom cap (2)/ upper retainer (2)/ lower retainer (2)). Replacement GTR shock...

This is the Traxxas Primary Shaft, 1st Speed Hub, and One-Way Bearing for Revo 3.3, Slayer, and T-Maxx 3.3 trucks.IncludesOne Primary ShaftOne One-Way BearingOne Snap RingOne spacerFitsRevo 3...

This is the Traxxas Black Chrome Front and Rear Bumper Set for the Revo 3.3, 1/10 E-Revo, and 1/10 E-Revo Brushless Trucks.Fits1/10 E-Revo Brushed1/10 E-Revo BrushlessRevo 3.3