Traxxas

This is the Traxxas Slash 2WD Low-CG Chassis Conversion Kit. The Low-CG Conversion Kit lowers the chassis, battery, and electronic components to bring all the advantages of a low center of gravity...

This is the Traxxas High Performance Silicone Grease This Silicone grease is used throughout most all of the Traxxas vehicles, it can also be used in most any R/C greasing application.   

This is Silicone grease that is used throughout most all of the Traxxas kits, it can also be used in most any R/C greasing application.  (1- tube of grease approximately 1 oz.)

This is the Traxxas Titan 550 12 Turn Electric Motor for vehicles like the Slash, Stampede, Rustler, and Bandit.  The Titan 12T 550 modified motor is designed for incredible mod-motor power...

This is the Traxxas BL-2s 3300 Brushless Motor BL-2s Brushless MotorThe sensorless BL-2s 3300 kV motor delivers the all-day speed and torque you expect from brushless technology, without the high...

These are the Traxxas Heavy Duty Differential Output Yokes for the Slash 2WD, 4x4, Nitro Slash, 1/10 Rally, Stampede 2WD, 4x4, and Rustler Trucks.Includes2 output yokes2 screw pins

This is the Traxxas 2085X Digital High-torque Metal Geared Ball Bearing Waterproof Steering Servo, stiffer servo saver spring, and steel steering linkage for the X-Maxx and Maxx trucks. With 23% more...

This is a Traxxas 58-Tooth Spur Gear for the Jato 2.5, 3.3, and the T-Maxx 3.3. The lower number of teeth on the spur gear, the faster the vehicle will be.  The higher the number of...

This is the Traxxas Recoil Starter for the 2.5, 2.5R, and 3.3 Traxxas engines on vehicles like the Revo, T-Maxx, Rustler, and Jato.  Removing the stock EZ-Start system and using a...

This is the Traxxas Heavy Duty Driveshaft Assembly for the Slash 4x4 and Stampede 4x4. The front heavy-duty driveshaft comes pre-assembled and ready to install with screw pin. It's a step up from...

This is the Traxxas 2017 Ford Raptor Slash 2WD Front Bumper, Mount and Adapter.Stock Replacement OnSlash 2WD Ford Raptor

This is the Traxxas 1800mAh 7.2V 6-Cell NiMH Battery with Standard Tamiya Plug. This is used in Traxxas EZ-Start Systems with nitro vehicles. This works with the EZ-Start 1 and 2. Traxxas Power Cell...

This is the Traxxas 1M Weight Differential Oil Fluid used in the Traxxas Unlimited Desert Racer / UDR trucks.Stock Replacement OnUnlimited Desert Racer (UDR)

This is the Traxxas Stub Axle Pins and Hex Wheel Hubs Includes(2) 12 mm Composite hex wheel hubs (2) Axle pins Replacement Part ForBIGFOOTDrag SlashFord F-150 RaptorFord Fiesta ST RallyHoss 4X4...

This is the Traxxas Unlimited Desert Racer Clear Body with Decals. The body comes pre-trimmed and ready for paint.Accessory Part ForUnlimited Desert Racer (UDR)

This is the Traxxas Alumimum Bearing Adapter for the Slash 4x4, Stampede 4x4, and 1/10 Rally VXL. FEATURES 6061-T6 anodized blue aluminum constructionSteel 10x15x4mm ball bearing with blue rubble...

This is the Traxxas 12mm Hex Wheel Hubs with Pins (part 3654). These are used in a large number of Traxxas vehicles, including the front of the electric Stampede 2WD, Slash 2WD, Rustler, Monster Jam,...

This is the Traxxas Velineon 3500 VXL Brushless Motor Rebuild Kit. This set includes two 5x11x4mm ball bearings, four 2.5x5mm buttonhead screws with threadlock, replacement front and rear bushings,...

This is the Traxxas 2075 Digital High-Torque Waterproof Servo. This servo puts out 125 oz/in of torque at 6V. This is a stock replacement for many vehicles, and can also be used as an upgrade to the...

This is a set of Traxxas Pivot Ball Caps (4) for E-Revo, Revo 3.3, and Revo 2008 Limited Edition. Two sets required for complete truck. Pivot ball cap set Includes(4) Pivot ball caps(4) Rubber dust...

This is the Traxxas 2-Amp AC Wall Charger for 5-7 Cell, 6-8.4V NiMH ID battery packs. This is the perfect option to charge your batteries from a wall outlet at a reasonable price.Charges 5-cell...

These are the Traxxas Replacement Drive Shaft Boots for the Revo, T-Maxx 3.3, E-Maxx 3905, and other vehicles. Features: Rubber Construction Blue in Color Includes:Two Blue Rubber Driveshaft Boots

These are the Traxxas 30-Degree Castor Blocks for the Rustler, Stampede 2WD XL-5 and VXL, Slash 2WD, and Nitro Slash trucks. Replacement 30° left & right caster blocks FEATURES:Black Plastic...

This is the Traxxas Male Battery Connector Set (2).  These are for use as an ESC connector. Note: 4S Traxxas ID batteries are not compatible with these connectors due to the connector shape.

This is the Traxxas Battery hold-down, tall (1)/ hold-down retainer, front & rear (1 each) (allows for installation of taller, multi-cell batteries)Extended battery hold-down with front and rear...

This is a Red Aluminum Pushrod Set (2 rods) with installed rod ends for use with Progressive 1 (part TRA5357), Progressive 2 (part TRA5358), or long travel rockers. These pushrods are 102mm in length...

This is the Traxxas Steering Bellcrank Set for the Slash 2WD, Slash 4x4, 1/10 Rally, Bandit, Rustler, and Stampede 4x4 vehicles. Features: Composite nylon construction Replaces a worn or damaged...

This is the Traxxas 2082 Gear Set for the 2080 Micro Waterproof Servos.These have been used in vehicles such as:1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss...

This is the Traxxas TQi 2.4GHz Radio System with 5-Channel Traxxas Stability Management (TSM) telemetry-enabled receiver and Bluetooth Wireless module included. The Bluetooth wireless module works in...

This is a Traxxas Steel Differential Ring and Pinion Gear Set for the 1/16 E-Revo, Summit, Slash, Rally, and other 1/16 Traxxas vehicles. This will fit both XL-2.5 and VXL models.Includes:One...

This is the Traxxas LaTrax Metal Differential Gear Set with Output, Spider, and Ring Gears. This is an excellent upgrade for LaTrax vehicles that originally came with plastic gears. It is a direct...

This is a Traxxas Large Servo Saver for Futaba, Hitec, Airtronics, and Traxxas servos. This will work on most vehicles requiring a large servo saver. The servo saver protects your steering servo by...

This is a bottle of Traxxas 50K Weight Diff Oil (1.75 oz / 50cc) with filler nozzle. This oil can be used to tune differentials in many Traxxas vehicles for peak performance!For use in these...

This is the Traxxas Complete Stainless Steel Suspension Hinge Pin Kit for the T-Maxx and E-Maxx trucks. These fit all versions of the T-Maxx .15, 2.5, 3.3, E-Maxx, and E-Maxx Brushless trucks. ...

This is the Traxxas Extreme Heavy Duty Front Driveshaft Assembly with Screw Pin. This is one complete shaft assembly for the left or right. This is a stock replacement on Rustler 4x4 and newer Slash...

These are the optional Traxxas Red Aluminum 59mm Turnbuckle Toe Links for the Traxxas 1/10 Slash 2WD, Slash 4x4, Rustler XL-5 & VXL trucks.Traxxas aluminum turnbuckles make it easy to add...

This is set of Traxxas Rod Ends (16 long & 4 short) with 18 hollow balls and two ball screws. These are used on most Traxxas vehicles.Includes:4 short rod ends (17mm)16 long rod ends (19mm)2 ball...

These are the Traxxas Spring Retainers for Traxxas Shocks. This set contains the spring retainers that hold the springs in place over the shock body and the piston heads that control the amount of...

These are the Traxxas TRX-4 Bronco Chrome Left and Right Side Mirrors, Retainers, and Body Clips for use on the TRX-4 Ford Bronco bodies. Chrome left and right side mirrors for the TRX-4 1979 Ford...

This is the Traxxas Bigfoot #1 Body Accessories Kit. This set includes the winch, front and rear bumpers, roll bar, light bar, engine detail, and full mounting hardware.The chrome grill is sold...