Slayer Pro 4x4

This is the Traxxas Slayer Pro 4x4 Nitro Ready-to-Run Short Course RC Truck with Traxxas Stability Management and TQi Link Radio (Traxxas Bluetooth Link Module Compatible - Module sold separately). The truck comes fully-assembled and Ready-to-Race,...

This is the Traxxas EZ-Peak Dual iD 100W LiPo and NiMH charger. It will charge two 2S-3S LiPo, and 5-8 cell NiMH battery packs. The EZ-Peak Dual charger works with both iD batteries, and standard LiPo or NiMH with Traxxas high-current connectors. Charge...

This is the Traxxas EZ-Peak Plus 4-Amp Auto-iD LiPo and NiMH Charger. It will charge 2S-3S LiPo, and 5-8 cell NiMH battery packs. The EZ-Peak Plus 4-Amp charger works with the Traxxas iD style battery plugs, as well as the Traxxas high-current plug. It...

This is a quart of Traxxas Top Fuel 20% Nitro Radio Controlled Car and Truck Engine Fuel. Traxxas Fuels are Perfectly Blended with high quality ingredients to give your Engine Easier Starts, Faster Runs, and longer life.This item ships only to the 48...

This is the Traxxas EZ-Peak Live Dual iD 200-Watt Charger for LiPo and NiMH batteries. The new EZ Peak Live Dual Output iD Charger is the most advanced, most powerful charger ever from Traxxas! As with other EZ Peak iD chargers, these are compatible with...

This is the Traxxas Super Duty Long Glowplug. FEATURES:Ideal for all Traxxas engines including the 2.5, 2.5R and 3.3 enginesSuited for the varied throttle range of off-road racingMedium heat range INCLUDES:One Traxxas Medium Heat Range Super Duty Long...

This is the Traxxas Tool Set with Carrying Case. This is the must-have set for all Traxxas owners. It comes with a six Allen/Hex drivers, five nut drivers, three Phillips head screwdrivers, three flat-head screw drivers, and an dual-end open-ended...

This is a 2 pack of 5X11mm Ball Bearings  Pair of 5x11x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out for less maintenance, smoother running and less friction. FEATURES:Metal bearing constructionBlue rubber dirt...

This is the Traxxas Speed Bit Set, screwdriver, 3-piece straight (3mm slotted, #1 Phillips, and #2 Phillips bits), 1/4" drive. New Phillips and Straight screwdriver bits are precision-ground from the same premium hardened tool steel as Traxxas hex speed...

This is the Traxxas Speed Bit 7-Piece Metric Hex and Nut Driver Essentials Set with 1/4" drive Premium Handle and Travel Pouch. Set Includes:Straight Hex Drivers: 1.5mm, 2.0mm, 2.5mmNut Drivers: 5.0mm, 5.5mm, 7.0mm, 8.0mmPremium handle (1/4" drive)Travel...

This is the Traxxas 13-Piece Metric Speed Bit Master Set 13-Piece Metric Speed Bit Master Set (8710)Traxxas premium tool kits are manufactured from exceptionally high quality materials to provide years of pro-level service. The thoughtfully engineered...

This is the Traxxas Speed Bit Master Set Metric 7-Piece Straight and Ball End Hex Driver Set with 1/4" Drive Premium Handle and Travel Pouch. Set Includes:Premium handle (1/4" drive)Travel pouchStraight Hex Drivers: 1.5mm, 2.0mm, 2.5mm, 3.0mmBall End Hex...

This is the Traxxas EZ-Peak Plus 4s, 8-Amp Auto-iD NiMH/LiPo with iD Auto Battery Identification Charger. With up to 8-amps of output it will charge 2S-4S LiPo, and 5-8 cell NiMH battery packs. The EZ-Peak Plus 4s, 8-Amp charger works with the Traxxas iD...

This is the Traxxas EZ-Peak Live 12-Amp ID Charger. With up to 12-amps of output and the ability to operate the charger via Bluetooth from your iOS or Android device, this is the most powerful, most advanced charger ever from Traxxas!Traxxas iD...

This is the Traxxas Speed Bit Master Set Metric 6-Piece Nut Driver Set with 1/4" Drive Premium Handle and Travel Pouch. Set Includes:4.0 mm Nut Driver4.5 mm Nut Driver5.0 mm Nut Driver5.5 mm Nut Driver7.0 mm Nut Driver8.0 mm Nut DriverPremium handle...

This is a replacement antenna tube. Antenna tubes are used to help secure and protect reciever antenna wires. INCLUDES:1 blue antenna tube and 1 black antenna tube cap. SPECIFICATIONS:Length: 11"Outside Diameter: 1/8"

This is the Traxxas Speed Bit 3-Piece Metric Hex Driver Set with 1/4" drive.  This set includes straight tip 1.5mm, 2.0mm, and 2.5mm end bits.  The 1/4" drive makes these perfect for use with powered screwdrivers, or with the standard Traxxas...

This is the Traxxas Stability Management TSM 2.4GHz Receiver, model 6533. Now you can add TSM to any vehicle being used with a TQi transmitter!Traxxas Stability Management (TSM) allows you to experience all the extreme power, speed, and acceleration that...

This is the Traxxas Link Bluetooth Wireless Module for use with TQi radio systems having the a TQi logo with the blue letter "i" on the face. The wireless module works with Android (v4.4 OS and higher), iPhone (4S and newer), iPod touch (5th generation...

This is Traxxas Ultra Premium RC Tire Glue. Only one tire glue is certified for use with the 100+mph XO-1: Traxxas Ultra Premium Tire Glue. The XO-1 relies on a high-strength tire bond to withstand incredible centrifugal forces at speeds in excess of...

This is the Traxxas Phone Mount for Traxxas TQi and Aton Transmitters. The Transmitter Phone Mount provides a secure mounting base for your mobile device when using it for the Traxxas app.

This is the Traxxas Recoil Starter for the 2.5, 2.5R, and 3.3 Traxxas engines on vehicles like the Revo, T-Maxx, Rustler, and Jato.  Removing the stock EZ-Start system and using a pull-start such as this is a great way to cut some...

This is the Traxxas 1800mAh 7.2V 6-Cell NiMH Battery with Standard Tamiya Plug. This is used in Traxxas EZ-Start Systems with nitro vehicles. This works with the EZ-Start 1 and 2. Traxxas Power Cell NiMH battery packs provide excellent...

This is the Traxxas 2075 Digital High-Torque Waterproof Servo. This servo puts out 125 oz/in of torque at 6V. This is a stock replacement for many vehicles, and can also be used as an upgrade to the 2056 servo found in some models.Specifications125 oz-in...

This is a set of Traxxas Pivot Ball Caps (4) for E-Revo, Revo 3.3, and Revo 2008 Limited Edition. Two sets required for complete truck. Pivot ball cap set Includes(4) Pivot ball caps(4) Rubber dust boots (4) Rubber dust plugs (4) Blue dust boot retainers...

This is the Traxxas Male Battery Connector Set (2).  These are for use as an ESC connector. Note: 4S Traxxas ID batteries are not compatible with these connectors due to the connector shape.

This is the Traxxas TQi 2.4GHz Radio System with 5-Channel Traxxas Stability Management (TSM) telemetry-enabled receiver and Bluetooth Wireless module included. The Bluetooth wireless module works in conjunction with the Traxxas Link App on Android...

This is a bottle of Traxxas 50K Weight Diff Oil (1.75 oz / 50cc) with filler nozzle. This oil can be used to tune differentials in many Traxxas vehicles for peak performance!For use in these vehicles and more!1/10 E-Revo Brushed1/10 E-Revo Brushless1/10...

This is a bottle of Traxxas 100K Weight Diff Oil (.7 oz / 20cc) with fill nozzle. This thick viscosity oil can be used to stiffen up differential action in many RC vehicles. Diff oil this thick is often used for center differentials.For use with these...

This is the Traxxas Fuel Line  (2 ft) SpecificationsFuel line (610mm or 2ft)24" fuel line Replacement Part ForJatoNitro RustlerNitro SlashRevoSlayer Pro 4X4T-Maxx Accessory Part ForTRX 2.5RTRX 3.3TRX Pro .15

This is the Traxxas Speed Bit 3-Piece Metric Ball Hex Driver Set with 1/4" drive.  This set includes 2.0mm, 2.5mm, and 3.0mm ball end bits.  The 1/4" drive makes these perfect for use with powered screwdrivers, or with the standard Traxxas...

This is the Traxxas Speed Bit 2-Piece Metric Ball Hex Driver Set with 1/4" drive.  This set includes 2.0mm and 2.5mm ball end bits.  The 1/4" drive makes these perfect for use with powered screwdrivers, or with the standard Traxxas Speed Bit...

This is the Traxxas Speed Bit 4-Piece Metric Hex Driver Set with 1/4" drive.  This set includes straight tip 1.5mm, 2.0mm, 2.5mm and 3.0mm end bits.  The 1/4" drive makes these perfect for use with powered screwdrivers, or with the standard...

This is the Traxxas Heavy Duty Slipper Clutch Rebuild Kit. This is used on vehicles with the Revo-style slipper setup, including the Revo 3.3, E-Revo, E-Revo Brushless, T-Maxx 3.3, E-Maxx, E-Maxx Brushless, Summit, and Slayer Pro. Features:...

This is the Traxxas TQ 2.4GHz 3-Channel Micro Receiver for use with the TQ 2.4GHz transmitter. The TQ 2.4GHz micro receiver uses an integrated LINK button for fast and easy binding. A two-color LED indicates power-on and bind status for fool-proof...

This is a 1.75 oz bottle of Air Filter Oil from Traxxas. FEATURES:Used to treat foam air filter elements to increase their filtering capacity, and extend engine life.1.75 fluid ounce bottle provides oil for many applications, and is still small enough to...

This is the Hot Racing Super Duty Slipper Clutch for Traxxas Slash 4x4, Stampede 4x4, 1/10 Summit, E-Maxx, E-Maxx Brushless, 1/10 E-Revo, 1/10 E-Revo Brushless, 1/10 Rally VXL, Revo 3.3, Slayer Pro 4x4, and T-Maxx 3.3 trucks. This replaces the Traxxas...

This is a pair of Traxxas 5x8x2.5mm Blue Rubber Sealed Ball Bearings. These fit a large number of Traxxas 1/10 and 1/16 scale vehicles.Includes: (2) 5X8mm ball bearingsSpecificationsInside diameter: 5mmOutside diameter: 8mmWidth: 2.5mmReplacement part...

This is the Long Temperature and Voltage Sensor for the Traxxas TQi system. To read voltage on electric vehicles, this must be used with the Traxxas part TRA6541 Power Tap. The temperature/voltage sensor plugs directly into your TQi receiver and power...

This is a package of replacement Traxxas 5x8mm Teflon Washers  Set of 20 PTFE-coated 5x8x0.5 mm washers for use with bearings. FEATURES:Black teflon construction.Used on the axles and in the transmission. INCLUDES: Set of 20 PTFE-coated 5x8x0.5 mm...