Slayer Pro 4x4

These are Traxxas 3x12mm Button Head Screws (6). Features: Steel Construction Black in color Hex head Includes: Six button head screws Specifications:Length: 12mm (.47")Diameter: 3mm (.12") Replacement part for1/16 E-Revo VXL1/16 E-Revo1/16...

This is the Traxxas Differential Gear Set with diff output gears, spider gears, spider gear shaft, and diff carrier support. This fits 1/10 E-Revo, Revo 3.3, Summit, E-Maxx, T-Maxx, and Slayer trucks.IncludesTwo Output GearsTwo Spider GearsSpider Gear...

This is a set of ten Traxxas PTFE-coated 6x8x0.5mm washers (10).Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 SummitNitro SlashRevo 3.3SlayerSlayer ProS-MaxxSportmaxxT-Maxx 2.5T-Maxx 2.5RT-Maxx 3.3

This is an assortment of e-clips, c-clips, and body clips for the Traxxas line of cars and trucks. Includes: 28 of the 2.5mm E-clips, 2 of the 3mm E-clips, 3 of the 5mm E-clips, 4 of the shock C-clips and 3 body clips.

This is the Replacement Roller Clutch for the Traxxas 2.5 and 3.3. This is located at the EZ Start end of the crankshaft. This is the One Way bearing for the EZ starter and is also used with a pull starter FEATURES:Steel construction INCLUDES:One roller...

These are the Hot Racing Carbon Fiber Stock Length Slipper Clutch Pads, for use in place of Traxxas 5352 or 5552 slipper pads. These fit Traxxas Bandit, E-Maxx, E-Revo, Jato 3.3, Rally VXL, Revo 3.3, Rustler, Slash 2WD, Slash 4X4, Slayer Pro 4X4,...

This a bottle of 10K Weight Diff Oil (1.75 oz / 50cc) with a filler nozzle. This oil can be used in a wide range of Traxxas vehicles to help tune the differentials for optimum performance.For use with these vehicles and more!1/10 E-Revo Brushed1/10...

This is a pair of replacement Traxxas 14mm Steel Wheel Hex Hubs and Pins. These will fit many Traxxas vehicles, including the T-Maxx 2.5, 3.3, E-Maxx, Revo, E-Revo, Summit, and Slayer vehicles. FEATURES Steel construction, black in...

This is a set of Traxxas 3mm Hardened Set Screws, also known as grub screws. Each package includes 12 set screws. Set of twelve 3 mm hardened steel grub screwsReplacement part for these models1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 SummitBanditDCB...

This is a Package of Replacement Caster Spacers for the Traxxas 2.5 T-Maxx. These spacers adjust caster of the wheels. FEATURES:Black nylon construction. INCLUDES:Four caster spacersFour caster shims REQUIRES:Nothing.  These are direct replacement...

This is the GPM Racing Blue 6061-T6 Aluminum 90T Progressive-2 Rear Rocker Arm Set for Traxxas 1/10 E-Revo, E-Revo 2.0, Summit, Revo 3.3, and Slayer Pro trucks.IncludesRocker Arm-2pcsStainless Steel Round Head Screw 3x14-4pcsLock Nut 3mm-4pcsAlloy Spacer...

These are the Traxxas Collars with Set Screws. These come in packages of two.Includes:(2) screw collars(2) 3mm set screws Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 SummitE-MaxxNitro 4-TecNitro RustlerNitro SlashNitro SportNitro StampedeNitro...

This is the Traxxas 17-Tooth Clutch Bell with 5x8x0.5mm fiber washer and 5mm e-clip. This clutch bell requires using 5x11x4mm ball bearings.FeaturesFits Traxxas 1/10 scale nitro vehiclesReplaces worn or damaged clutch bellsConstructed of hardened...

This is the Traxxas Molex/Tamiya to Receiver Pack Charging Adapter. This adapter allows you to use a charger equipped with a standard Tamiya-style plug to charge receiver batteries.

This is the 500K Weight Differential Oil from Traxxas FEATURES Lubricates differential Clear in color 500K weight INCLUDESOne .70oz (20cc) Bottle Of 500K Diff Lube REQUIRESApplication to differential

This is a Slipper Clutch Rebuild Kit for the Traxxas Revo 2.5, 3.3, T-Maxx 3.3, and E-Maxx 16.8V Trucks. FEATURES:Repairs damaged slipper clutches INCLUDES:(1) Spring(2) Nuts(1) Pin(1) Metal Plate(3) Pads(2) WashersInstruction...

This is a Traxxas Brake Pad Set for the Revo 2.5, 3.3, and T-Maxx 3.3 trucks.  These outer calipers come with a bonded friction material. Inner and outer brake calipers with bonded friction material pads Replacement Part...

This is the Traxxas Replacement Servo Gear Set for 2055 and 2056 Servos. This is Traxxas part number 2053.

This is the Traxxas 4x15mm Screw Pin Set for the Revo and other vehicles.  This includes six screw pins. Features: Metal Construction Black in Color Hex Head Design Includes: Six 4mm x 15mm Black Metal Screw Pins. Specifications:Length...

This is a package of six 3x6mm Traxxas Button Head Screws. Features: Steel construction Black in color Used on the Traxxas Revo monster truck, can also be used in any application where a 3x6mm button head screw is required Includes: Six...

These are the Traxxas 17mm Splined Red Aluminum Wheel Hubs, Nuts, & Screw Pins for the 1/10 E-Revo, E-Maxx, Summit, T-Maxx, and Revo 3.3 trucks. These allow you to run wheels with a 17mm hex size.Features: Aluminum construction, red anodized in...

This is the Traxxas Air Filter Housing and Foam Insert with angled air filter base for use on the Revo 2.5, 3.3, and Slayer trucks. The mounting zip-tie is included as well.FitsRevo 2.5 & 3.3SlayerSlayer Pro

This is a set of 4 Traxxas Pivot Balls and Pivot Ball Cap Bushings. These fit the 1/10 E-Revo, 1/10 Summit, E-Maxx, T-Maxx, Revo 3.3, Slayer, and more!FeaturesReplaces stock pivot balls and pivot ball cap bushings.Pivot balls are made of steel, pivot...

This is the Traxxas Servo Y-Connector for use with Dual-Servo Steering Setups when there is only one steering channel on the receiver. The Y-adapter allows you to connect two servos to a single receiver port for trucks with dual-servo steering...

This is a set of 4 Traxxas 7075-T6 Hard-Anodized Aluminum Pivot Balls and Pivot Ball Cap Bushings. These fit the 1/10 E-Revo, 1/10 Summit, E-Maxx, T-Maxx, Revo 3.3, Slayer, and more!These trick, hard-anodized 7075-T6 aluminum pivot balls are...

This is a Traxxas Revo 2.5 and 3.3 Linkage Set.  This includes the throttle & brake linkage, linkage rods, springs, thumb nut, & various other hardware.

This is a set of RPM Black Snap-Tite Body Savers. One of the weakest points on a Lexan body is where the body mounts to the chassis. The holes cut in the body for the body posts have a tendency to crack and fracture. This is the reason RPM designed these...

This is the Traxxas Replacement O-ring Header Gasket for the Traxxas 2.5, 2.5R, and 3.3 Engines. This is located on the header of the engine. Features: Red silicone construction. Includes: One 12.2x1mm o-ring

This is a pair of Traxxas 6x12mm Ball Bearings with Rubber Dirt Shields. Pair of 6x12x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out for less maintenance, smoother running and less friction...

This is the Traxxas TRX 3.3 Racing Engine with Pull Start.  This will give your Revo, T-Maxx 2.5, or Jato an unbelievable boost in performance.  This is a must have upgrade.  You can also use this with the factory EZ-Start. ...

This is the Traxxas 2.5 and 3.3 Spring-Mounted Exhaust Header Set for the Revo 2.5, 3.3, and Slayer trucks.FitsRevo 3.3SlayerSlayer Pro

This is a set of four Traxxas 4x13mm Screw Pins with Threadlock. These are used on many vehicles, such as the E-Maxx, T-Maxx, Revo 3.3, Slayer, and XO-1.FeaturesMetal ConstructionBlack in ColorHex Head DesignThreadlockIncludes: Four 4mm x 13mm Black...

This is a pack of Traxxas 3x15mm Countersunk Hex Head Machine Screws. Each package includes six screws.Fits:1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 SummitE-MaxxE-Maxx BrushlessFunny CarJato 2.5Jato 3.3Nitro 4-TecRevo 3.3SlayerSlayer ProT-Maxx 2...

This is the Traxxas 35mm Flywheel with Magnet for use with the TQi Radio System.FeaturesFor use with Traxxas glow powered vehiclesEquipped with a magnet that enables an RPM sensor to read RPM data IncludesTraxxas 35mm Flywheel with Magnet

This is the Hot Racing Aluminum Double-Shear Servo Horn Arm for the Traxxas Spartan and Spartan SR boats. FEATURES:- CNC 6061 T-6 aluminum construction, anodized blue- Used with 25 spline servos (i. e. Futaba, Savox, TRA brand servos)YOU WILL RECEIVE:-...

This is the Traxxas iD LiPo Battery Balance Adapter for Cell Voltage Checkers. This works with 2S, 3S, and 4S ID LiPo batteries to connect them to cell voltage checkers for individual cell reading. Warning: These are not intended for charging. The...

This is the GPM Racing Green 6061-T6 Aluminum 90T Progressive-2 Rear Rocker Arm Set for Traxxas 1/10 E-Revo, E-Revo 2.0, Summit, Revo 3.3, and Slayer Pro trucks.IncludesRocker Arm-2pcsStainless Steel Round Head Screw 3x14-4pcsLock Nut 3mm-4pcsAlloy...

This is the Traxxas High-Speed Needle Valve Assembly for the TRX 2.5, 2.5R, and 3.3 nitro engines. This includes the high speed need, fuel fitting, 2.5x1.15mm O-rings (2), and 5.3x7.8x.6mm crush washers (2).For use with TRX 2.5 & 3.3 engines used...

These are the Traxxas 3x15mm Buttonhead Hex Machine Screws. Each package includes six screws. These are used across many different Traxxas vehicles.Replacement part for1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 Summit4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL...

This is a pair of Traxxas 8x16x5mm Ball Bearings.  These are replacements for the differential bearings in the Revo and other vehicles. Features: Stainless Construction Blue Rubber Sealed Includes: Two 8mm x 16mm Rubber Sealed...