Slayer Pro 4x4

This is an O-Ring and Seal Set for the TRX 2.5 Engine. FEATURES Complete seal and ring set. Black, blue and red rubber construction. Brass ring installation tools. INCLUDESTwo brass ring installation tools.One blue rubber carburetor level seal.Two...

These are Traxxas Body Clips for the Traxxas Vehicles.  It is always good to have extra body clips around to keep your body securely fastened.  These fit all of the .15, 2.5, and 3.3 versions of these trucks, as well as many other vehicles...

These are the Traxxas Sway Bar Mounts and Wires for 1/10 E-Revo, Revo 3.3 and Slayer Pro trucks.IncludesOne Thick Front Sway Bar (black in color)One Thin Front Sway Bar (silver in color)One Thick Rear Sway Bar (black in color)One Thin Rear Sway Bar...

This is the Traxxas Right-Side Electronics Box with Cover, Rubber Charge Jack Plug, Foam Padding and Adhesive. This fits Revo 3.3 and Slayer trucks.FitsRevo 3.3SlayerSlayer Pro

These are the Diff and Trans Drive Yokes for the Traxxas T-Maxx 3.3, E-Maxx 16.8V and E-Maxx Brushless, Revo 3.3, E-Revo and E-Revo Brushless trucks. FEATURES:Black plastic construction INCLUDES:Two drive yokesTwo 4x15mm Yoke pins REQUIRES:T-Maxx 3...

This is the GPM Racing Green Aluminum Rear Shock Mount for Traxxas 1/10 E-Revo 2.0, E-Revo Brushed & Brushless, Revo 3.3, Slayer, and Summit trucks. Made of 6061-T6 aluminum, this mount is super tough and looks stunning with its anodized finish.This...

These are the Traxxas Forward and Reverse Primary Gears for Revo 3.3, T-Maxx 3.3 (with reverse), and Slayer trucks.IncludesOne Plastic Forward gearOne Steel Reverse gearOne Steel retaining clipOne copper gear washerOne gear pinOne instruction sheet ...

These are the Traxxas Aluminum Rocker Arm Posts (4) for Revo 3.3, 1/10 E-Revo, and Slayer trucks. Upgrade to these to save weight over the stock steel rocker posts.Includes: Four aluminum rocker arm postsFits1/10 E-Revo Brushed1/10 E-Revo BrushlessRevo...

This is a package of six Traxxas 4x10mm Button-Head Hex Machine Screws.Replacement part forE-Revo VXL BrushlessFord Fiesta ST RallyHoss 4X4 VXLMaxxRevoRustler 4X4 VXLSlash 4X4 UltimateSlayer Pro 4X4SummitUnlimited Desert Racer

This is a set of Traxxas Axle Pins.These pins go through the stub axles on each wheel, the wheel hubs are then placed over these pins. Features: Axle pins are steel Includes: Four 2.5x12mm axle pins Replacement part for these modelsRevoSlayer...

This is a package of six 3x10mm Traxxas Countersunk Hex Head Screws. FEATURES Steel construction, Black in color Used on the Traxxas Revo monster truck, can also be used in any application where a 3x10mm countersunk screw is...

This is the Cooling Head Protector for the Traxxas TRX 3.3 Racing Engine, TRA5407. FEATURES:Constructed of plastic, black in color INCLUDES:Cooling Head Protector and five 3x6mm screws REQUIRES:Fastening to top of cooling head SPECS:Thickness: 0.18" (4...

This is the Digital High Torque Traxxas Servo. FEATURES:Ball bearingsBlack plastic construction INCLUDES:One digital high torque ball bearing servo SPECS:Ratings such as speed and torque have not been provided by Traxxas.Length: 2.16" (55mm)Width: .78"...

This is a Traxxas Revo 2.5 and 3.3 Steel Suspension Hinge Pin Set for the front or rear of the truck.  There are enough pins included to replace the hinge pins in the front or rear of the truck.  To replace all of...

This is a Traxxas Front and Rear Shock Mount Set for the Revo 2.5, 3.3, and Slayer trucks.  Included is one front shock mount, one rear shock mount, four chassis wire clips, four 3x32mm caphead machine screws, and four 3x6mm buttonhead...

This is the GPM Racing Blue Aluminum Rear Shock Mount for Traxxas 1/10 E-Revo 2.0, E-Revo Brushed & Brushless, Revo 3.3, Slayer, and Summit trucks. Made of 6061-T6 aluminum, this mount is super tough and looks stunning with its anodized finish.This...

This is the GPM Racing Black 6061-T6 Aluminum 90T Progressive-2 Rear Rocker Arm Set for Traxxas 1/10 E-Revo, E-Revo 2.0, Summit, Revo 3.3, and Slayer Pro trucks.IncludesRocker Arm-2pcsStainless Steel Round Head Screw 3x14-4pcsLock Nut 3mm-4pcsAlloy...

This is the Traxxas 43-Tooth 1st Speed Gear for Revo 3.3, Slayer, and T-Maxx 3.3 trucks.Includes: One 43T 1st Speed GearFitsRevo 3.3SlayerSlayer ProT-Maxx 2.5RT-Maxx 3.3

This is the Traxxas Revo and Slayer Receiver and Battery Box with cover, foam pad, adhesive, rubber charge jack plug, 4x8mm screw, and two 4x12mm screws. This set contains both boxes to accommodate either AA battery holder or a 5-cell receiver flat pack...

This is a set of Traxxas TRX 3.3 Cooling Head Gaskets measuring 0.20, 0.30, and 0.40mm. The stock size is 0.30mm. These will give you the ability to tune your engine for optimal performance under your conditions.Fits TRX 3.3 engines in:Nitro 4-TecNitro...

These are the Traxxas 3x25mm Buttonhead Hex Machine Screws. Each package includes six screws.Replacement part for these modelsE-Revo VXL BrushlessMaxxRevoSlayer Pro 4X4SledgeSummitTRX-4 1972 Chevrolet Blazer High Trail EditionTRX-4 1979 Chevrolet...

This is the Header Spring and Gaskets from Traxxas for the TRX 2.5, TRX 2.5R and the TRX 3.3 Engines FEATURES Spring constructed of steel INCLUDESOne header springOne black rubber gasketOne white nylon gasket REQUIRESFastening header to engine...

This is the High Volume Air Filter Body for the Traxxas Revo 3.3. FEATURES Replaces damaged or dirty air filter assemblies Plastic body with foam element and rubber attachment hose INCLUDESFoam filter and pre filter, support cap, filter base  and...

This is the Rubber Tuned Pipe Coupler Set for the Traxxas Revo, TRAC71**. FEATURES:Black rubber construction INCLUDES:One black couplerOne black exhaust deflectorTwo 7" (178mm) zip tiesTwo 3" (76mm) zip ties REQUIRES:Installing between tuned pipe and...

This is the Traxxas Aluminum Handled Body Post Hole Reamer with Cap for Lexan RC bodies.  With a crisp steel cutting edge and included aluminum cap for protection, this is not your average body reamer.  The tip features both metric (mm) and...

This is the Traxxas Black Antenna Tube with Cap and Wire Retainer.  These are compatible with nearly all Traxxas cars, trucks and boats.  The sleek black design looks great as well.

This is the GPM Racing Blue Aluminum Rear Body Post Mount Set for Traxxas 1/10 E-Revo 2.0, E-Revo Brushed & Brushless, Revo 3.3, Slayer, and Summit trucks. Made of 6061-T6 aluminum, this mount is super tough and looks stunning with its anodized finish...

This is the Traxxas Tires, Kumho (dual profile 4.3x1.7- 2.2/3.0') (2)/ foam inserts (2). This is Traxxas part number 6870Part Number: 6870 / TRA6870FitsNitro SlashSlash 2WDSlash 2WD Ford RaptorSlash 2WD VXLSlash 2WD VXL (low CG)Slash 2WD XL-5Slayer...

This is the Traxxas Steering Arm Mount and Stops for the 1/10 E-Revo, Revo 3.3, Summit, and Slayer trucksFits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 SummitRevo 3.3SlayerSlayer Pro

This is a pair of Traxxas Red Aluminum Front and Rear Bulkhead Tie Bars for use on 1/10 E-Revo, Summit, Revo 3.3, and Slayer trucks.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 SummitRevo 3.3SlayerSlayer Pro

This is the Traxxas TRX 2.5 & 3.3 Engine Backplate 20x1.4mm O-Ring, part number 5213.

This is a package of six Traxxas 4x14mm Button-Head Hex Machine Screws.Replacement part for these modelsE-Revo VXL BrushlessFord Fiesta ST RallyHoss 4X4 VXLMaxxRevoRustler 4X4 VXLSlash 4X4 UltimateSlayer Pro 4X4SummitUnlimited Desert RacerX-MaxxXO-1XRT

This is a Traxxas Rod End Set for the optional GTR shocks on the Revo. Features: Plastic construction Black in color Includes: Six Rod Ends Specifications:Length: 18.35mm (0.72")Width at ball joint: 10.35mm (0.40") Comments: If Pivot Balls are...

This is a package of Aluminum Pushrod Spacers for the Traxxas Revo. These are installed on the Progessive suspension system. FEATURES:Red anodized aluminum construction INCLUDES:Eight 4x6x3mm spacers REQUIRES:Nothing.  These are direct fit parts.

This is the Traxxas Polished Aluminum Resonator Dyno-Tuned Performance Pipe for the Revo 2.5 and 3.3 monster trucks.  This gives the Revo nearly 20% more power on the bottom-end, where it is needed most when accelerating hard.  This...

This is replacement Traxxas Fuel Tank Pull Ring, Cap, and Shutoff Clamp for the Revo 2.5 and 3.3 trucks.  If you need the entire fuel tank, search our store for TRA5363.

This is a Traxxas Heavy Duty Servo Saver Spring for the Revo 2.5 and 3.3.  This servo saver spring should be used when using metal geared servos.

This is a Traxxas Revo Transmission Skid Plate and Roll Hoop Set for the Traxxas Revo 2.5 and 3.3 trucks.  If you crack or break these, you should always fix them.  Without fixing them, you can have big expenses down the road.

This is the Traxxas Complete Stock Replacement Carburetor for the Traxxas TRX 2.5 and TRX 3.3 Engines.  A damaged carburetor will severely decrease the power of your engine.  This can restore the lost power.  The...

This is the GPM Racing Black 6061-T6 Aluminum 90T Progressive-2 Front Rocker Arm Set for Traxxas 1/10 E-Revo, E-Revo 2.0, Summit, Revo 3.3, and Slayer Pro trucks.IncludesRocker Arm-2pcsStainless Steel Round Head Screw 3x16-2pcsStainless Steel Round Head...