Hot Racing

This is the Hot Racing 12mm to 17mm Hex Hub Adapters with 10mm Offset for Traxxas Slash 4x4, Stampede 4x4, Telluride, Associated ProLite 4x4, and Losi TEN-T vehicles.These adapters are compatible...

This is the Hot Racing Complete Front and Rear Adjustable Sway Bar Set for the Traxxas 1/16 E-Revo, Slash, and Rally vehicles. This will work on brushed and VXL brushless versions. Add this sway...

This is the Hot Racing Hardened Steel 55-Tooth Spur Gear for Traxxas 1/16 Vehicles such as the 1/16 E-Revo, 1/16 Slash 4X4, 1/16 Summit, and 1/16 Rally.FEATURES:- CNC machined light weight hardened...

This is the Hot Racing Hardened Steel 86-Tooth 48-Pitch Spur Gear for Traxxas Slash 2WD, Stampede 2WD, Rustler, and Bandit vehicles. This will fit XL-5 brushed and VXL brushless trucks.FEATURES:-...

This is the Hot Racing Heavy Duty Splined Front Center Drive Shaft with Planetary Gear Housing for Traxxas Unlimited Desert Racer trucks. This is a great way to upgrade one of the weak points in the...

This is the Hot Racing Aluminum Heat Sink Motor Mount for Traxxas 1/16 vehicles with 540 or 550 Motors, such as the 1/16 E-Revo, 1/16 Slash, 1/16 Rally, and 1/16 Summit.FEATURES:- CNC machined...

This is the Hot Racing Hardened Steel 48-Pitch 1/8" Bore Pinion Gear Set. This set includes a 24-tooth, 26-tooth, 28-tooth, and 30-tooth pinion gear.This set of gears is great for Traxxas Rustler...

This is the Hot Racing Aluminum Dual Water Pick-up Rudder Blade for the Traxxas DCB M41 Catamaran Boat. Add this to your boat for improved cooling options.FEATURES:- CNC machined billet aluminum...

This is the Hot Racing Aluminum 36mm Water Cooling Jacket for the Traxxas Spartan SR boat.  FEATURES:- CNC machined billet aluminum construction- Full coverage and machined cooling fins for...

This is the Hot Racing Aluminum 36mm Full Coverage Water Cooling Jacket for the Traxxas Spartan boat.FEATURES:- CNC machined billet aluminum construction- Full coverage and machined cooling fins for...

This is the Hot Racing 27-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:Standard 4140 steel and heat...

This is the Hot Racing Hardened Steel 48-Tooth Spur Gear for Traxxas 1/16 vehicles like the 1/16 E-Revo, Slash, Summit, and Rally.FEATURES:- CNC machined light weight hardened steel construction-...

This is the Hot Racing Aluminum Double-Shear Servo Horn Arm for the Traxxas Spartan and Spartan SR boats. FEATURES:- CNC 6061 T-6 aluminum construction, anodized blue- Used with 25 spline servos (i...

This is the Hot Racing Aluminum Rudder Blade Mount for the Traxxas Spartan SR boat.  Combine this with the Hot Racing aluminum dual port cooling outlet for ultimate cooling. FEATURES:- CNC...

These are the Hot Racing Blue Aluminum 100mm HD Big Bore Rear Shocks for Slash 2WD, Slash 4x4, Stampede 2WD & 4x4, Rustler, Bandit, T-Maxx and E-Maxx front/rear, Associated SC10, and many other...

This is the Hot Racing Aluminum Dual Pick-up Rudder Blade for the Traxxas Spartan and Spartan SR boats. These are a must-have for improved cooling on high-powered Spartans. Combine this with the Hot...

This is the Hot Racing Blue Aluminum Dual Water Outlet for Traxxas Spartan and DCB M41 catamaran boats.FEATURES:- CNC machined billet aluminum construction- Dual water outlet- Blue anodized finish...

This is the Hot Racing Aluminum Transmission Spur Gear Cover for the Traxxas E-Revo 2.0 monster trucks.This upgrade fits in place of Traxxas part 8677.Features- CNC aluminum construction spur gear...

This is the Hot Racing Aluminum Differential Carrier Housing for Traxxas X-Maxx 6S & 8S trucks. These can be used in the front and rear diffs, resulting in a much more durable driveline.This is for...

This is the Hot Racing 12mm to 17mm Hex Hub Adapters with 6mm Offset for Traxxas Slash 4x4, Stampede 4x4, Telluride, Associated ProLite 4x4, and Losi TEN-T vehicles.These adapters are compatible with...

This is the Hot Racing Aluminum Servo Saver Steering Bellcrank for the Traxxas 1/16 Revo, 1/16 4x4 Slash, 1/16 Mustang, 1/16 Rally, and 1/16 Summit. This will fit the brushed and VXL brushless...

This is the Hot Racing Spring Loaded Skid Plate 2-Tire Wheelie Bar for the Traxxas 1/16 E-Revo, Slash, Summit, and Rally. This will fit the 1/16 brushed and VXL brushless versions of these vehicles...

This is the Hot Racing 92-Tooth 48-Pitch Hard Anodized Aluminum Spur Gear for Traxxas Slash 2WD, Stampede 2WD, Rustler, and Bandit. It will work with XL-5 brushed and VXL brushless trucks.FEATURES:-...

These are the Hot Racing Black Aluminum Steering Blocks for Slash 4x4, Stampede 4x4, 1/10 Rally VXL, and Telluride trucks.FEATURES:- CNC machined aluminum- Anodized black- Machined chamfered edges-...

This is the Hot Racing Traxxas Aluminum Double Trim Tab Adjusters for Traxxas Spartan and Spartan SR boats. These are functional, durable, and look awesome! FEATURES:- CNC machined aluminum...

These are the Hot Racing Heavy Duty Aluminum Front or Rear Axle Carriers (AKA steering knuckles) for Traxxas 1/16 E-Revo, Slash 4x4, Summit, Grave Digger, Ford Fiesta, and Rally.NOTE: The disc brakes...

This is the Hot Racing Blue Aluminum Adjustable Trim Tabs for Traxxas Spartan boats. These are functional, durable, and look awesome!FEATURES:- Adjusts angle of trim tab assembly for proper hull...

This is the Hot Racing 20-Tooth 48-Pitch Nitride Steel Pinion Gear for 5mm and 1/8" Shafts. The pinion has a 5mm bore and also includes a 1/8" shaft conversion sleeve. This works on vehicles like...

This is the Hot Racing Aluminum Dual 5mm Bearing Drive Strut for use with the stock prop shaft on the Traxxas DCB M41 Catamaran.FEATURES:- Pre-installed dual 5x10x4mm stainless steel ball bearings-...

This is the Hot Racing dirt guard chassis cover for the 1/10 scale TRA Slash 4X4 with the regular (non-LCG) chassis. The chassis cover attaches to the chassis with easy-to-apply hook and loop tape;...

This is the Hot Racing Dirt Guard Chassis Cover for the Rustler 4x4 The chassis cover attaches to the chassis with easy-to-apply hook and loop tape; has zipper chassis access; and uses a breathable...

This is the Hot Racing Aluminum Piggyback Adjustable Reservoir Shock Upgrade Kit for Traxxas X-Maxx 6S & 8S trucks. This includes reservoirs to upgrade two shocks. This kit complements factory shock...

This is the Hot Racing Aluminum Hard Anodized Red GTR Shock Bodies for Traxxas 1/16th scale vehicles, including the 1/16 E-Revo, 1/16 Slash 4X4, 1/16 Summit, 1/16 Rally, 1/16 Ford Fiesta, 1/16 Grave...

These are the Hot Racing Blue Aluminum CNC-Machined Adjustable Turn Fins for the Traxxas Spartan boat. These high performance turn fins will help your boat turn faster, provide better straight-line...

These are the Hot Racing Black Aluminum 0-Degree Rear Hub Carriers for Slash 4x4, Stampede 4x4, 1/10 Rally, Telluride, Nitro Rustler, Nitro Slash, Nitro Sport, and Nitro Stampede.FEATURES:- CNC...

This is the Hot Racing CNC Machined Aluminum Front or Rear Differential Housing Cover for X-Maxx 6S and 8S trucks. This is a direct replacement for Traxxas part 7780 / TRA7780 diff housing covers...

This is the Hot Racing Adjustable Aluminum Servo Saver Steering Bellcrank for the Traxxas 2WD Slash, Rustler, and Bandit vehicles. This will fit XL-5 brushed and VXL brushless versions.FEATURES:-...

These are the Hot Racing Blue Aluminum Hinge Pin Capture Bushings for the Traxxas X-Maxx 6S and 8S trucks.FEATURESReplace worn or damaged hinge pin capture bushingsCNC aluminum...

This is the Hot Racing Black Aluminum Rear Body Mount Post Set for Traxxas 1/16 E-Revo, Slash, and Rally vehicles. This will fit brushed and VXL brushless models of these cars.FEATURES:CNC machined...

This is the Hot Racing Black Aluminum Rear Shock Mount for Traxxas 1/16 E-Revo, Slash, Rally, and Summit vehicles. This will work on 1/16 brushed and VXL brushless trucks.FEATURES:CNC machined of...