Hot Racing

These are the Hot Racing Super Duty Steel CV Drive Shafts and 12mm hexes for Traxxas 1/16 E-Revo VXL trucks. These can be used on the front and rear of the 1/16 E-Revo VXL.FEATURES:CNC construction...

These are the Hot Racing Aluminum Splined 17mm Hex 6mm Offset Hubs for the Traxxas Rally VXL, Slash 4X4, Stampede 4x4, and Telluride 4X4 vehicles. Offset from stock wheel hex is +6mm per side...

These are the Hot Racing Aluminum Precision Trim Tab Adjusters for Traxxas Spartan, Spartan SR and DCB M41 boats. - OPEN ITEM *The factory packaging has been opened/torn but the parts have not been...

These are the Hot Racing Aluminum Precision Trim Tab Adjusters for Traxxas Spartan, Spartan SR and DCB M41 boats. - OPEN ITEM *The factory packaging has been opened/torn but the parts have not been...

This is the Hot Racing Traxxas Sledge Dirt Guard Chassis Cover The chassis cover attaches to the chassis with easy-to-apply hook and loop tape; has zipper chassis access; and uses a breathable Nylon...

These are the Hot Racing Front Multi-Rate Springs (3 Pairs) for Traxxas Slash 2WD, Stampede 2WD, and Rustler trucks. These will work on the XL-5 brushed and VXL brushless trucks.FEATURES:Spring...

This is the Hot Racing Aluminum Rear Body Post Mount for the Traxxas 1/10 E-Revo, E-Revo 2.0, Revo 3.3, Slayer Pro, and 1/10 Summit trucks.This is an upgrade to the rear mount in Traxxas part 5314...

This is the Hot Racing Aluminum Front Body Post Mount for Traxxas 1/10 E-Revo, E-Revo 2.0, Revo 3.3, Slayer Pro, and 1/10 Summit trucks.This upgrade fits in place of the front body mount in Traxxas...

These are the Hot Racing Heavy Duty Aluminum Rear Axle Housing Lock Outs for the Traxxas Unlimited Desert Racer trucks. These are CNC machined from aluminum and anodized black for a top-notch finish...

This is the Hot Racing Aluminum Rear Multi-Mount Rocker Arms for Traxxas 1/16 E-Revo, Slash, Rally, and Summit vehicles. Now you do not need to change the rocker arm to change progressive rate. Just...

This is the Hot Racing Dirt Guard Chassis cover for Traxxas Slash 2WD with Standard Chassis (non-LCG). This will fit XL-5 and VXL versions. The chassis cover attaches to the chassis with...

This is the Hot Racing Aluminum Steering Rack Center Brace for Traxxas Unlimited Desert Racer trucks. Made of 6061-T6 aluminum with a black anodized finish, these look great and help tighten up the...

These are the Hot Racing Aluminum Adjustable Steering Turnbuckle Tie Rods for Traxxas X-Maxx 6S & 8S trucks. These are well-built and offer adjustability to the front end of the X-Maxx to improve...

This is a Hot Racing Aluminum Dummy Exhaust Pipes Set for Traxxas Spartan and DCB M41 catamaran boats. This makes a great addition to any other similar RC boat as well!FEATURES:- CNC machined...

This is the Hot Racing Aluminum 54T Slipper Spur Gear (0.8 metric pitch, compatible with 32-pitch) Features CNC machined 6061-T6 aluminum Direct fit replacement for vehicles with slipper clutch...

This is the Hot Racing 46 Tooth Hardened Steel Mod 1 (1.0 metric pitch) Spur Gear FeaturesCNC machined hardened steel construction - Black oxide finished - Laser etched tooth count...

This is the Hot Racing Traxxas E-Revo 2.0 Aluminum Differential Carrier Case. This works on the front or rear of the E-Revo 2.0.This upgrade is a replacement for Traxxas part 8681.Features:- CNC...

These are the Hot Racing Swaybar-Ready Black Aluminum Lower Suspension Arms for the Traxxas X-Maxx 6S and 8S trucks. These can be used with Hot Racing sway bar kit XMX311X06.FEATURES:CNC T6 6061...

This is the Hot Racing HD CNC Machined Hard Anodized Aluminum Slipper Plate and Hub for the 1/10 Traxxas Bandit, Jato 3.3, Rally*, Rustler, Slash 2WD, Slash 4X4*, Stampede 2WD, and Stampede 4X4*...

This is the Hot Racing Aluminum Adjustable Steering Bellcranks and Servo Saver for the Traxxas Unlimited Desert Racer (UDR). This setup is super tough, looks great, and allows for a stiffer setting...

This is the Hot Racing Aluminum Diff Carrier Housing for the Traxxas Unlimited Desert Racer (UDR). This can be used in the front or rear differential.This upgrade replaces Traxxas part 8581...

This is the Hot Racing Traxxas E-Revo 2.0 Aluminum Front Bumper. This bumper features a rugged look, black anodizing, and comes with holes to mount 5mm LEDs if you want to add lights to it.This...

These are the Hot Racing Rear Multi-Rate Springs (3 Pairs) for Slash 2WD, Stampede 2WD, Rustler. These work on the rear of the XL-5 brushed and VXL brushless versions of these trucks.FEATURES:-...

These are the Hot Racing Black Aluminum C-Hub Castor Blocks for the 1/10 Traxxas Rally VXL, Slash 4X4, Stampede 4X4, and Telluride 4X4.FEATURES:- CNC machined 6061-T6 aluminum, anodized black- Brass...

This is the Hot Racing 53-Tooth 0.8 Mod 32-Pitch Spur Gear for 1/10 E-Revo, Jato, T-Maxx 3.3, Slash 4x4, Stampede 4x4, Summit, and 1/10 Rally VXL.FEATURES:- CNC machined and lightened hardened steel...

This is the Hot Racing Traxxas DCB M41 Aluminum Adjustable Trim Tabs Adjusts angle of trim tab assembly for proper hull planing *Uses the stock 4x12mm screws to mount on boat FeaturesAdjusts angle of...

This is the Hot Racing 52-Tooth Mod 1 Hardened Steel Spur Gear for Traxxas E-Revo 2.0, X-Maxx 6S & 8S, and XO-1 vehicles.Features- CNC machined hardened steel construction- Black oxide finished-...

This is the Hot Racing Center Differential Locker Spool for the Traxxas E-Revo 2.0. This part gets installed in the center diff case to eliminate the center differential action, ensuring full power...

This is the Hot Racing 6061-T6 Aluminum Suspension Pin Mount for the Traxxas E-Revo 2.0, original 1/10 E-Revo Brushed & Brushless, Revo 2.5 & 3.3, 1/10 Summit, and Slayer Pro trucks.This upgrade fits...

These are the Hot Racing Aluminum Adjustable Steering Turnbuckle Toe Links for Traxxas Unlimited Desert Racer trucks. These feature aluminum turnbuckles with blue anodized rod ends.This upgrade is a...

This is the Hot Racing Traxxas X-Maxx Aluminum Adjustable Servo Saver and Bellcrank Assembly. This works on the X-Maxx 6S and 8S trucks.FEATURES:- Super-tough, fully adjustable servo saver bell...

This is the Hot Racing Black Aluminum Front Bulkhead for Traxxas 1/16 E-Revo, Summit, Slash, and Rally. This will fit the brushed and VXL brushless versions of these vehicles. This is a direct...

This is the Hot Racing Aluminum Motor Mount and hardware for the Traxxas DCB M41 brushless boat. Made of CNC-machined 6061-T6 aluminum, this mount is designed to allow quick motor service, while...

This is the Hot Racing 31-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:CNC Machined light weight Precision...

This is the Hot Racing Aluminum Transmission Case for the Traxxas E-Revo 2.0 monster trucks. This looks great, and is much more rigid than stock to eliminate flex under heavy loads.This upgrade fits...

This is the Hot Racing Black Aluminum Front Clipless Body Mount for the Traxxas E-Revo 2.0 monster trucks.This upgrade replaces the front mount in Traxxas part 8614.FeaturesAluminum...

This is the Hot Racing Heavy-Duty Blue Aluminum Motor Mount with Over-Sized Bearings for the Traxxas Slash 4x4 Low-CG chassis trucks. This fits 1/10 Slash 4x4 Platinum, Ultimate, OBA trucks, Rally...

This is the Hot Racing Aluminum Hard Anodized Black GTR Shock Bodies for Traxxas 1/16th scale vehicles, including the 1/16 E-Revo, 1/16 Slash 4X4, 1/16 Summit, 1/16 Rally, 1/16 Ford Fiesta, 1/16...

This is the Hot Racing Aluminum 6mm Offset 17mm Hex Hubs for the Traxxas 1/10 Rally VXL, Slash 4X4, Stampede 4x4, and Telluride 4X4 vehicles. Offset from stock wheel hex is +12mm per side.FEATURES:-...

This is the Hot Racing Aluminum Standard Servo Adapter for the Maxx and X-Maxx. This aluminum adapter provides additional strength and durability when converting to a standard size servo FeaturesCNC...