RPM

These are the RPM Traxxas X-Maxx Oversized Rear Axle Carriers with Oversized Inner Bearings. These are a direct fit to X-Maxx 6S and X-Maxx 8S trucks, for an incredible improvement in durability...

These are the RPM Traxxas X-Maxx Oversized Front Axle Carriers with Oversized 20x32x7mm Inner Bearings.  These are a must-have upgrade for serious X-Maxx bashers. Features Replaces stock...

This is the RPM Dual Spare Tire Carrier for Traxxas Slash 2WD and 4x4 trucks. The dual tire carrier requires running the RPM rear bumper for installation.Mounting Requirements:An RPM Slash 2wd or...

These are the RPM Mud Flaps for use on the RPM Bumpers designed for the Traxxas Slash. FEATURES Rubber construction Black in color INCLUDESTwo Mud FlapsTwo Support ArmsTwo Screw SupportsFour...

This is the RPM Black Rear Bumper for the Traxxas Slash 2WD. RPM rear bumpers for the Traxxas Slash 2WD weigh in at a full 9 grams (18%) lighter than the stock version! Lighter is always faster...

This is the RPM Front Bumper and Skid Plate for Traxxas Unlimited Desert Racer trucks. Have you had to remove your front skid plate from your Traxxas UDR yet? Wasn't fun, was it? While we can't help...

This is the RPM Small Parts Tray with Magnet. Keep your pit area clean and tidy without losing all of those e-clips, nuts, & bolts that tend to roll off of your workbench whenever you work on your...

This is a pair of RPM Upper and Lower Suspension A-Arms for the Traxxas X-Maxx 6S and 8S trucks. This includes one upper and one lower arm. The upper arm replaces Traxxas part 7729, and the lower arm...

These are the RPM Body Savers for Traxxas E-Revo 2.0 trucks. These are perfect to upgrade a stock body before use, or to repair/salvage an already damaged body to prevent having to buy a new one...

This is the RPM Pit-Pro Extreme Car Stand for 1/10 and 1/8 Scale vehicles. Car stands have been around for a long time, with minimal innovation or ingenuity. That changes NOW! The all-new RPM Pit-Pro...

These are Optional Rear Bearing Carriers for the Traxxas Electric Rustler, Stampede and Bandit. The rear axles fit into these bearing carriers. FEATURES Black nylon...

This is the RPM Front Bumper and Skid Plate for use on the Traxxas Slash 4x4 Vehicles. When Traxxas first announced the 4x4 version of the Slash, RPM customers immediately started asking us if our...

This is the RPM Rear Bumper for use on the Traxxas Slash 4X4.  This fits all versions of the 1/10 scale Traxxas Slash 4x4 including the Slash Ultimate and Slash Platinum.The 4x4 version of the...

These are the RPM Chrome Revolver 2.2/3.0 Wheels for the front/rear of Traxxas 1/10 Slash 4x4, and rear of Slash 2WD Short Course trucks. These feature splined drives instead of hexes for incredible...

This is the RPM Precision Camber Gauge. One of the most critical suspension adjustments on a R/C vehicle is the vehicle's camber. RPM has proven time after time that even the most experienced drivers...

This is the RPM Single Spare Tire Carrier for Traxxas Slash 2WD and 4x4 trucks. This requires using an RPM rear bumper for the Slash 2WD or 4x4.Are you looking to bolt on a spare tire to your...

This is the RPM Black Wide Front Bumper for the Traxxas electric Rustler, electric Stampede 2WD, Bandit, Nitro Rustler, and Nitro Stampede trucks. At over six inches wide, this offers the ultimate in...

This is the RPM Black Rear Bumper/Wheelie Bar Mount for the Traxxas Slash 2WD, Rustler, Stampede 2WD, and Bandit vehicles.After hearing numerous requests to look into the rear bumper mount on the...

These are the RPM Blue Front Bearing Carriers / Steering Blocks for Traxxas Slash 2WD, Nitro Slash, Rustler XL-5 & VXL, Stampede 2WD XL-5 & VXL, Skully, Craniac, and Bigfoot trucks. These...

These are the RPM Traxxas Unlimited Desert Racer (UDR) Trailing Arm Skid Plates for use with RPM81282 Trailing Arms.RPM Trailing Arm Skid Plates protect RPM Trailing Arms (RPM #81282 - sold...

This is the RPM Low Visibility Wheelie Bar for use with RPM Bumpers on the Traxxas Slash 2WD, Slash 4x4, and Losi Ten-SCTE short course 1/10 scale trucks. These must be used with the RPM bumpers for...

This is the RPM Black Front Bulkhead for Traxxas 2WD trucks, including the Slash 2WD, Nitro Slash, Rustler, Nitro Rustler, Stampede 2WD, Skully, Craniac, Bigfoot, Nitro Stampede, and Bandit trucks...

These are the RPM Blue Front Caster Blocks for Traxxas electric Slash 2WD, Rustler, and Stampede 2WD trucks, as well as the Nitro Slash. This will fit XL-5 and VXL versions of the electric trucks...

These are the RPM Blue Front Right Suspension A-Arms for Traxxas E-Revo 2.0 trucks. While Traxxas may have beefed up the E-Revo 2.0 suspension arms, they’re still not nearly as tough as RPM versions,...

This is a pair of optional Front A-Arms for the Traxxas Electric Stampede and Rustler. FEATURES Composite nylon construction, black in color Direct fit hop-up requires no model modification for...

These are the RPM Black Heavy Duty Front/Rear Suspension A-Arms for the Traxxas Slash 4x4, Rustler, 4x4, Hoss 4x4, Stampede 4x4, and 1/10 Rally vehicles. These arms are everything you've come to...

This is the RPM Black Caster Block Set for the Traxxas Slash 2WD, electric Rustler, electric Stampede 2WD, and Nitro Slash trucks. These replace Traxxas part 3632.RPM Caster Blocks for the Traxxas...

These are the RPM Blue Front Left Suspension A-Arms for Traxxas E-Revo 2.0 trucks. While Traxxas may have beefed up the E-Revo 2.0 suspension arms, they’re still not nearly as tough as RPM versions,...

This is the RPM Black Front Bumper and Skid Plate Set for the Traxxas Slash 2WD and Nitro Slash short course trucks. This setup is almost a full ounce lighter than stock!Our two-piece front bumper...

This is the RPM Toe-In Gauge. Our Toe-In gauge allows you to do track-side checks of the toe-in without removing the wheels! Our gauge checks toe through the simple method of comparing the distance...

This is a pair of RPM Blue Upper and Lower Suspension A-Arms for the Traxxas X-Maxx 6S and 8S trucks. This includes one upper and one lower arm. The upper arm replaces Traxxas part 7729, and the...

This is the RPM Black Tubular Front Bumper for Traxxas Revo 2.5, 3.3, 1/10 E-Revo, and E-Revo Brushless Trucks. RPM provides the added protection the Revo needs with unbelievable strength and...

This is the RPM Black Steering and Caster Block Set for Traxxas Slash 4x4, Stampede 4x4,  Hoss 4x4, 1/10 Rally, and Telluride Trucks.Since the release of the first Slash 4x4, RPM customers have...

These are the RPM Red Front or Rear Suspension A-Arms for Traxxas Slash 4x4, Rustler 4x4, Hoss 4x4, Stampede 4x4, and 1/10 Rally VXL cars and trucks.RPM A-arms for the Traxxas Slash 4x4 , Rustler 4x4...

These are the RPM Blue Heavy Duty Front/Rear Suspension A-Arms for the Traxxas Slash 4x4, Rustler 4x4, Hoss 4x4, Stampede 4x4, and 1/10 Rally vehicles. These arms are everything you've come to expect...

This is the RPM Blue Front Bulkhead for Traxxas 2WD trucks, including the Slash 2WD, Nitro Slash, Rustler, Nitro Rustler, Stampede 2WD, Skully, Craniac, Bigfoot, Nitro Stampede, and Bandit trucks and...

These are the RPM Blue Extended Right Rear A-Arm Set for 1/10 Summit (stock replacement), E-Revo 2.0 (stock replacement), 1/10 E-Revo, E-Revo Brushless, and Revo 3.3 trucks. These are replacements...

These are the RPM Blue Extended Left Rear A-Arms for 1/10 Summit (stock replacement), E-Revo 2.0 (stock replacement), 1/10 E-Revo, E-Revo Brushless, and Revo 3.3 trucks. These are replacements for...

This is the RPM Black Front Bulkhead Set for the Traxxas T-Maxx .15, 2.5, 3.3, E-Maxx, and E-Maxx Brushless trucks. These are backed by RPM's industry-leading lifetime breakage warranty.Until now,...

This is a pair of RPM Green Upper and Lower Suspension A-Arms for the Traxxas X-Maxx 6S and 8S trucks. This includes one upper and one lower arm. The upper arm replaces Traxxas part 7729, and the...