RPM

This is the RPM 1/10 Scale Mock Radiator and Fans RPM's Mock Radiator and Fans include everything needed to bolt it in place on your favorite scale ride. This simple set-up will add concours winning...

This is the RPM Rear Shock Tower for the Rustler 4x4 & Hoss 4x4. Replaces Traxxas stock part #6738 The Rear Shock Tower is based on RPM's Slash 4x4 shock tower designs with proven performance and...

This is the RPM Front Shock Tower for the Rustler 4x4 & Hoss 4x4. Replaces Traxxas stock part #6739 The Front Shock Tower is based on RPM's Slash 4x4 shock tower designs with proven performance...

This is the RPM Traxxas Slash 2WD Grey Rear Skid Plate. This works on XL-5 brushed and VXL brushless trucks. The stock rear bumper mount cannot be used with this skid plate. In order to mount a...

This is the RPM Black Front Shock Tower for the Traxxas Nitro Slash, Nitro Rustler, and Nitro Sport trucks.RPM shock towers for Traxxas 1/10th scale trucks are designed to add strength and support to...

This is the RPM Blue Front Suspension A-Arm Set for the Electric Bandit, Nitro Rustler, Nitro Stampede, and Nitro Sport vehicles.RPM Rear A-arms for the Traxxas Bandit, Nitro Rustler, Nitro...

These are the RPM Green Shock Shaft Guards for the Traxxas 1/10 Slash 2WD, Slash 4x4, Stampede, Rustler, Bandit, and 1/10 Rally vehicles, as well as Durango DEX210, DEX410, and DEST210 vehicles. ...

This is the RPM Chrome Rear Bumper for the Traxxas 1/10 Slash 4x4 short course trucks.The 4x4 version of the Slash is another awesome creation from the minds at Traxxas but with a little help from...

This is the RPM Traxxas X-Maxx Black Front Bumper Mount. This is a direct fit on X-Maxx 6S and 8S trucks, replacing the stock TRA7733 bumper support.The RPM Front Bumper Mount for the Traxxas X-Maxx...

These are the RPM Blue Rear Upper and Lower Suspension A-Arms for the Traxxas 1/16 E-Revo and 1/16 Grave Digger vehicles.Similar to RPM front A-arms (#80694), our rear arms eliminate nearly all of...

This is the RPM Black Pinion Gear Carrying Case. These will hold up to 15 pinion gearsRPM designed this enclosed pinion case to hold each pinion on its own post. There is no need to tighten the...

These are the RPM Blue 4-40 Long Shank Rod Ends for 4.3mm/0.17" Ball Studs, perfect for many Associated, Losi, and HPI vehicles. When it comes to rod ends, RPM rod ends are the basis for comparison!...

This is the RPM Mega Bearing Blaster for Bearings up to 1.25" (32mm) outside diameter, and 3/16" (5mm) inside diameter. The RPM Mega Bearing Blaster takes up where our original Bearing Blaster leaves...

These are the RPM Blue Front Upper & Lower Suspension A-Arms for Traxxas 1/16 E-Revo and 1/16 Grave Digger trucks.Upon the release of the Traxxas 1/16th Scale Mini E-Revo, RPM immediately started...

This is the RPM ESC Cage for the Castle Cobra 8 ESC and ARRMA 6S Vehicles RPM's ESC Cage for the Castle Cobra 8 ESC provides a solid, positive mount to keep your new and valuable ESC in place even...

This is the RPM ESC Cage for the Castle Cobra 8 ESC and Traxxas Vehicles The RPM ESC Cage for the Castle Cobra 8 ESC for Traxxas vehicles provides a solid, positive mount. A locked in mount keeps...

This is the RPM Body Skid Rails - fits most 1/5 - 1/12 bodies These Body Skid Rails will fit nearly any scale R/C car or truck. The only requirements are, the surface must be featureless, flat or...

This is a pair of RPM Black Revolver 2.2" Wheels for front of the Traxxas Electric Rustler and Electric Stampede 2WD, or the rear of Traxxas nitro vehicles like the Jato, Nitro Rustler, Nitro Sport,...

This is the RPM Rear Bumper Mount for the Traxxas 1/10 Summit trucks. RPM bumper mounts for the Traxxas Summit are designed to absorb serious impacts while transferring minimal impact energy into the...

This is the RPM Chrome Front Bumper and Gray Skid Plate Set for the Traxxas Slash 2WD and Nitro Slash short course trucks. This setup is almost a full ounce lighter than stock!Our two-piece front...

These are the RPM Blue Extended Body Mounts for use with RPM Shock Towers on the Traxxas T-Maxx .15, 2.5, 3.3, E-Maxx, and E-Maxx Brushless. These are designed for use only with the RPM shock towers...

This is a pair of RPM Orange Upper and Lower Suspension A-Arms for the Traxxas X-Maxx 6S and 8S trucks. This includes one upper and one lower arm. The upper arm replaces Traxxas part 7729, and the...

These are the RPM Replacement 20x32x7mm Bearings for use with RPM 81732 Oversized Traxxas X-Maxx Axle Carriers.  Each pack includes two bearings. Tech Notes: RPM replacement bearings are...

These are the RPM N2O Chrome Resto-Mod 5 Spoke Sedan Wheels (2).  Each pack includes two wheels. N2O is the chemical formula for Nitrous Oxide, one of the most powerful fuel additives on the...

These are the RPM N2O Gloss Black Resto-Mod 5 Spoke Sedan Wheels (2).  Each pack includes two wheels. N2O is the chemical formula for Nitrous Oxide, one of the most powerful fuel additives on...

These are the RPM Orange Shock Shaft Guards for Traxxas X-Maxx.  Each pack includes two shock shaft guards. Two packages will be needed to complete one vehicle. Features Over 100 degrees of...

These are the RPM Blue Shock Shaft Guards for Traxxas X-Maxx.  Each pack includes two shock shaft guards. Two packages will be needed to complete one vehicle. Features Over 100 degrees of...

These are the RPM Green Shock Shaft Guards for Traxxas X-Maxx.  Each pack includes two shock shaft guards. Two packages will be needed to complete one vehicle. Features Over 100 degrees of...

These are the RPM Black Shock Shaft Guards for Traxxas X-Maxx.  Each pack includes two shock shaft guards. Two packages will be needed to complete one vehicle. Features Over 100 degrees of...

These are the RPM Roof Skid Rails for Traxxas X-Maxx bodies.  These include the under body support plates and six mounting screws. Let’s face facts. If you own an X-Maxx, there’s a...

This is the RPM Shotgun Style Mock Intake and Blower Set for 1/12 to 1/8 Scale Bodies RPM is adding another intake style to the line up with a Shotgun Style Mock Intake and Blower. The newest scoop...

These are the RPM Stainless Steel Threaded Hinge Pins for Traxxas X-Maxx trucks (4).  This includes four hinge pins and four locknuts. These are for use in the outer pin location of the lower...

This is the RPM Body Saver Set for Traxxas Rustler 4x4 trucks.  These are compatible with the stock bodies on both the Rustler 4x4 Brushed and Rustler 4x4 VXL Brushless trucks, as well as all...

This is the Spektrum DSMX Remote Receiver with 24" Extension.Key Features Repositionable and Replaceable Antenna - The antenna is easy to reposition to exit the case from the top or side Case...

These are the RPM Servo Mounting Posts. RPM servo mounting posts have several hole positions available to accommodate various sized servos and are trimmed down to reduce bulk, yet they mount very...

This is the RPM Pink Wide Front Bumper for Rustler 2WD, Stampede 2WD, Bandit, Nitro Sport, Nitro Stampede, and Nitro Rustler. On the electric versions, this works with both XL-5 brushed and VXL...

This is the RPM Pink Front Bumper and Skid Plate Set for the Traxxas Slash 2WD and Nitro Slash short course trucks. This setup is almost a full ounce lighter than stock!Our two-piece front bumper...

These are the RPM Pink Rear Suspension A-Arms for Traxxas Slash 2WD XL-5 and VXL electric trucks.RPM rear A-arms for the Traxxas Slash are designed specifically for the Slash 2wd - They are not...

This is the RPM Pink Transmission Gear Cover for 1/10 Traxxas Slash 2WD XL-5 & VXL, Stampede 2WD XL-5 & VXL, Rustler 2WD XL-5 & VXL, and Bandit XL-5 & VXL buggies. This replaces...

These are the RPM Pink Front Suspension A-Arms for Traxxas Slash 2WD, Rustler 2WD XL-5 & VXL, Stampede 2WD XL-5 & VXL, and Nitro Slash trucks. The arms work with all variations of the electric...