RPM

These are the RPM Front Upper and Lower Suspension A-Arms for ARRMA Kraton, Talion, Outcast, and Durango DEX8T truggies. These weigh less than stock and are nearly indestructible! Each package...

This is the RPM Front Bumper and Skid Plate for ARRMA Kraton and Durango DEX8T truggies. With a 4mm thick skid plate and 171.5mm overall width, this set gives excellent protection and durability to...

These are the RPM Rear Suspension A-Arms for ARRMA Granite, Vorteks, Raider, Fury, and Mojave trucks. These are must stronger than stock, and come with RPM's limited lifetime warranty. This part...

This is the RPM Rear Skid Plate for ARRMA Kraton, Talion, Typhon, and Senton trucks, as well as Durango DEX8, DEX8T, DNX8 and DESC10 trucks.One of the highest dollar replacement items on any vehicle...

These are the RPM Rear Arm Mud Guards for use with the RPM arms for ARRMA Kraton, Talion, Outcast, and Durango DEX8T trucks and truggies. These must be used with the RPM81402 suspension arms.RPM Mud...

This is the RPM Associated B6 and B6D Wide Front Bumper. At 4-1/2" (114mm) wide, and extending out 1.5" in front of the chassis kicked up 45-degrees, this bumper helps protect your racer when you...

This is the RPM Associated B6 and B6D Rear Bumper and Skid Plate. All it takes is a single hit to the back of your race machine to realize the B6 / B6D has absolutely no rear end protection. Do you...

These are the RPM Axial Yeti XL Front Lower Suspension A-Arms. These replace Axial part AX31018. This arm set removes as much as 0.004″ (0.01mm) of slop from the inner and outer hinge pins. ...

These are the RPM Axial SCX10 Steering Knuckles. These are replacements for Axial part AX80004.RPM Steering Knuckles for the Axial SCX10 are designed for the hardcore trailblazer that needs strength...

This is the RPM Black Servo Saver Eliminator Bellcrank for ECX 2WD Ruckus, Torment, Circuit, and Boost buggies and trucks. This replaces the bellcrank and center link from stock ECX part 1028.Note:...

These are the RPM Rock Sliders for the Axial SCX10 crawlers and trail trucks. This replaces Axial part AX80041. These are full length with included kick-out for body and rear wheel protection. ...

These are the RPM Black HD Caster Blocks for ECX 2WD Ruckus, Torment, Circuit, and Boost buggies and trucks. These are a direct replacement for stock ECX part 234000 and 1090.Don’t let failed caster...

This is the RPM Black LaTrax Alias Landing Gear Set. This includes four landing gear legs, which add 20mm (0.8") of height. These replace the stock 6649 landing gear feet.The LaTrax Alias is a...

This is the RPM Shock Duplicator Matching Tool for up to 6 1/4" (158mm) Long Shocks using 4-40 or 3mm mounting screws. This covers most 1/8, 1/10, and down to 1/16 scale shocks.How do you know if...

These are the RPM Axial SCX10 Rear Shock Hoops and Body Mounts. These replace Axial AX80025 rear shock hoops and AX80031 body posts. These fit stock Axial AX30502 frame rails only.RPM Shock Hoops...

This is the RPM Sealed Gear Cover for ECX 2WD Torment, Ruckus, Circuit, and Boost cars and trucks. Are you tired of getting dirt in your gears of your Boost, Torment, Circuit or Ruckus? Perhaps...

These are the RPM Axial SCX10 Front Shock Hoops and Body Mounts. These replace Axial AX80025 front shock hoops and AX80031 body posts. These fit stock Axial AX30502 frame rails only.RPM Shock Hoops...

This is the RPM Black ESC Cage for Traxxas VXL-3S Velineon ESC (model 3355X ONLY - Does not fit 3355R). These are a great upgrade for Slash 4x4, Slash 2WD, Stampede 4x4, Stampede 2WD VXL, Rustler...

These are the RPM Black Front Suspension A-Arms and Bulkhead for HPI Blitz, Blitz ESE, Firestorm 10T, E-Firestorm, and E-Firestorm Flux. Box-stock, the Blitz is quite a rugged truck but hard-core...

These are the RPM Black Rear A-Arms for HPI Blitz, Blitz ESE, Firestorm 10T, E-Firestorm, and E-Firestorm Flux. Box-stock, the Blitz is quite a rugged truck but hard-core racers and bashers are...

This is the RPM Black Center Skid Plate for HPI Savage X (will not fit XL or Flux). Protection is the key to winning the battle against the elements. Stock HPI Savage-X trucks have a bare underbelly...

This is a pair of RPM Black Front Revolver 2.2" Wheels for 1/10 Associated trucks using 3/16" x 3/8" bearings.Pull the trigger on the competition when you equip your ride with some loaded Revolvers...

This is a pair of RPM Chrome Rear Revolver 2.2" Wheels for 1/10 Associated trucks with 3/16" Axles and pin-type drive.Pull the trigger on the competition when you equip your ride with some loaded...

This is a pair of RPM Black Rear Revolver 2.2" Wheels for 1/10 Associated trucks with 3/16" Axles.Pull the trigger on the competition when you equip your ride with some loaded Revolvers from RPM! Our...

This is the RPM Purple Left Front or Right Rear A-Arm Set for the HPI Savage X, XL, and Savage Flux Trucks. This set can be used on the left front, or the right rear. To upgrade both, you will need...

This is the RPM Blue Left Front or Right Rear A-Arm Set for the HPI Savage X, XL, and Savage Flux Trucks. This set can be used on the left front, or the right rear. To upgrade both, you will need...

This is the RPM Black Left Front or Right Rear A-Arm Set for the HPI Savage X, XL, and Savage Flux Trucks. This set can be used on the left front, or the right rear. To upgrade both, you will need...

This is the RPM Purple Right Front or Left Rear A-Arm Set for the HPI Savage X, XL, and Savage Flux Trucks. This set can be used on the left front, or the right rear. To upgrade both, you will need...

This is the RPM Blue Right Front or Left Rear A-Arm Set for the HPI Savage X, XL, and Savage Flux Trucks. This set can be used on the left front, or the right rear. To upgrade both, you will need...

This is the RPM Black Right Front or Left Rear A-Arm Set for the HPI Savage X, XL, and Savage Flux Trucks. This set can be used on the left front, or the right rear. To upgrade both, you will need...

This is the RPM Front Bumper & Skid Plate for HPI Baja 5B 1/5 Scale Buggies. The bumper itself is over 6-1/2” wide and is designed to prevent smaller objects such as fence and mailbox poles from...

This is the RPM Blue Wide Front Bumper for Traxxas Stampede 4x4 and Telluride trucks. The Traxxas Stampede 4x4 and Telluride are cool trucks with lots of great features built in, but it’s missing a...

This is the RPM Chrome Light Canister Set for the RPM Slash 2WD, Slash 4x4 and other RPM Short Course Bumpers (see full fitment info below). LED lights are not included.Our Light Canister Set for...

This is the RPM Blue Rear Bumper Mount for the Traxxas Revo 2.5, 3.3, 1/10 E-Revo, and E-Revo Brushless trucks.RPM customers already know our bumpers are some of the toughest in the R/C industry, but...

This is the RPM Blue Front Bumper Mount for the Traxxas 1/10 Revo 2.5, 3.3, E-Revo, and E-Revo Brushless vehicles.RPM customers already know our bumpers are some of the toughest in the R/C industry,...

This is the RPM Chrome Narrow Roof Mount Light Bar Set. LED lights are not included. This setup is perfect for adding lights to vehicles like the Traxxas T-Maxx, E-Maxx, Revo, E-Revo, 1/16 Slash, and...

This is the RPM Black Narrow Roof Mount Light Bar Set. LED lights are not included. This setup is perfect for adding lights to vehicles like the Traxxas T-Maxx, E-Maxx, Revo, E-Revo, 1/16 Slash, and...

These are the RPM Blue Rear Suspension A-Arms for Traxxas 1/16 Slash 4x4, Ford Fiesta, Ken Block Gymkhana, Ford Mustang Boss 302, Kyle Busch Race Replica, and Rally VXL.Following the successful...

These are the RPM Black Rear Suspension A-Arms for Traxxas 1/16 Slash 4x4, Ford Fiesta, Ken Block Gymkhana, Ford Mustang Boss 302, Kyle Busch Race Replica, and Rally VXL.Following the successful...

These are the RPM Red Front Suspension A-Arms for the Traxxas 1/16 Scale Slash 4x4, Ford Fiesta, Ken Block Gymkhana, Ford Mustang Boss 302, Kyle Busch Race Replica, and Rally VXL.Traxxas has released...