RPM

These are the RPM Black Zoomies Mock Exhaust Headers. What are ''Zoomies'', you might be asking? It's a term dating back to the 1970's that describes 4 upturned exhaust pipes or headers on each side...

These are the RPM Black Revolver 2.2/3.0 Wheels for the front/rear of Traxxas 1/10 Slash 4x4, and rear of Slash 2WD Short Course trucks. These feature splined drives instead of hexes for incredible...

This is the RPM Blue Wide Front Bumper for the Traxxas electric Rustler, electric Stampede 2WD, Bandit, Nitro Rustler, and Nitro Stampede trucks. At over six inches wide, this offers the ultimate in...

These are the RPM Green Front Upper & Lower Suspension A-Arms for Traxxas 1/16 E-Revo and 1/16 Grave Digger trucks.Upon the release of the Traxxas 1/16th Scale Mini E-Revo, RPM immediately...

This is a set of RPM Blue Nerf Bars for the Traxxas Slash 2WD and Slash 4x4 standard chassis trucks. This will not fit trucks with a low-CG chassis (does not fit Slash Ultimate).Nerf bars play an...

This is the RPM Red Heavy Duty Camber Link Set for Traxxas electric Rustler, Stampede 2WD, Skully, Craniac, and Bigfoot trucks. These are direct replacements for the molded links on the XL-5...

This is the RPM Blue Front Bumper and Skid Plate Set for the Traxxas Slash 2WD and Nitro Slash short course trucks. This setup is almost a full ounce lighter than stock!Our two-piece front bumper...

These are the RPM Chrome Mock Through-the-Body Side Exhaust Tips for 1/10 Scale Vehicles. This set comes with two complete tips, one for each side of the vehicle.Details. They're what set a custom...

This is the RPM Wheelie Bar Mount for Traxxas Rustler 4x4 trucks.  Add adjustability and stability to your Rustler 4x4 with this sturdy mount. RPM customers have reported durability and...

This is the RPM Black Heavy Duty Rear Bumper for the Traxxas T-Maxx 2.5, 3.3, E-Maxx 16.8V, and E-Maxx Brushless trucks. This can be used in place of Traxxas bumper part numbers TRA3926, TRA4935,...

This is the RPM Black Light Canister Set for the RPM Slash 2WD, Slash 4x4 and other RPM Short Course Bumpers (see full fitment info below). LED lights are not included.Our Light Canister Set for RPM...

This is the RPM Green Rear Suspension A-Arm Set for the Traxxas Rustler and Stampede 2WD vehicles. This includes one left and one right rear arm.RPM rear A-arms for the electric versions of the...

These are the RPM Black 4-40 HD Rod Ends for 4.3mm/0.17" Ball Studs. When it comes to rod ends, RPM rod ends are the basis for comparison! Our rod ends are strengthened in all the right places, they...

This is an RPM Black Rear Upper and Lower Suspension A-Arm Set for the Traxxas Revo 2.5 and 3.3 trucks.  This includes one rear upper and one rear lower arm.  These will work on either side...

This is the RPM Pink Rear Bumper for Traxxas Rustler XL-5 and VXL electric trucks. This fits 2WD trucks only.Are you looking for an actual rear bumper for your electric Rustler? We have you covered!...

These are the RPM Red Rear Suspension A-Arms for Traxxas Slash 2WD XL-5 and VXL electric trucks.RPM rear A-arms for the Traxxas Slash are designed specifically for the Slash 2wd - They are not...

These are the RPM Traxxas Slash 2WD Black LCG Nerf Bars for use on Slash 2WD trucks running the low-CG chassis. The chassis layout of the low center of gravity chassis (LCG) Slash 2wd is different...

These are the RPM Adjustable Front Body Mounts for Traxxas Slash 2WD, Nitro Slash, Rustler XL-5 & VXL, and Nitro Rustler vehicles. See Tech Notes at bottom for adjustability info on Rustler...

This is the RPM Blue Motor Protector for the Traxxas Slash 2WD, Rustler, Stampede 2WD, and Bandit vehicles. This is designed to be used in place of the bumper or wheelie bar. See Tech Notes at bottom...

These are the RPM Blue Short Rod Ends (12) for 1/10 Traxxas vehicles. These replace Traxxas part TRA5347. RPM Rod Ends cover a wide range of currently available Traxxas vehicles including all...

This is the RPM Chrome Front Bumper and Skid Plate Set for the Traxxas Slash 4x4 Short Course Trucks.When Traxxas first announced the 4x4 version of the Slash, RPM customers immediately started...

This is the RPM Front Shock Tower, Black: Traxxas E-Stampede, E-Rustler, Bandit & Nitro Stampede Overview RPM shock towers for Traxxas 1/10th scale trucks are designed to add strength and support...

This is the RPM 3-Piece Skid Plate Set (Black) for the Traxxas T-Maxx 3.3, E-Maxx 16.8V, and E-Maxx Brushless trucks. This includes a front, center, and rear skid plate. Overview The extended chassis...

This is the RPM Black Rear Bumper Mount for Traxxas XRT The RPM Rear Bumper Mount for the Traxxas XRT adds durability by replacing a commonly brokenstock part. How did RPM make it stronger? They...

These are the RPM Traxxas Nitro Slash Black Rear Suspension A-Arms. These replace stock part TRA2555, and weigh almost 20% less than the stock arms! These replacement arms are designed specifically...

These are the RPM Black Revolver 2.2/3.0 Front Wheels for the Traxxas Slash 2WD Electric Short Course trucks with Spline Drives. These feature splined drives instead of hexes for incredible strength...

This is the RPM Green Axle Carriers for the Traxxas 1/16 E-Revo, 1/16 Slash, and 1/16 Summit. This fits brushed and VXL brushless versions.There is very little that can be as frustrating on an R/C...

This is the RPM True-Track Rear A-Arm Conversion in Black for all versions of the Traxxas Revo 2.5, 3.3, E-Revo, and E-Revo Brushless. This setup is lighter, stronger, and eliminates the bump steer...

This is the RPM Monster Camber Gauge. This is used to adjust the camber angle on most current monster trucks. This allows you to get camber accuracy to within 1/2 degree!RPM has combined the most...

This is the RPM Black Front Bumper and Skid Plate for Traxxas Sledge The RPM Front Bumper and Skid Plate for the Traxxas Sledge is a unique design that works with the Traxxas body mounting mechanism...

This is the RPM Pink Rear Bumper for the Traxxas Slash 2WD. RPM rear bumpers for the Traxxas Slash 2WD weigh in at a full 9 grams (18%) lighter than the stock version! Lighter is always faster...

This is the RPM Blue Nerf Bar Set for 1/10 Rally & Slash 4x4 Ultimate and Low-CG Chassis Trucks. This will only fit vehicles running the low-CG chassis.RPM LCG Nerf Bars have added structural...

This is the RPM Traxxas X-Maxx Low Visibility Wheelie Bar. This must be used with the RPM81762 rear bumper mount. With the mount, it can be used on both X-Maxx 8S and 6S trucks.RPM Low Visibility...

This is the RPM Ride Height Gauge. The RPM Ride Height Gauges take the guesswork out of proper ride height adjustments! These gauges have a graduated scale along the upper edge of the base with easy...

This is the RPM Black Center Skid Plate for the Traxxas T-Maxx 3.3, E-Maxx 16.8V, and E-Maxx Brushless trucksFits: T-Maxx 3.3 (4907 & 4908 only - see bottom for version identification), E-Maxx 16...

These are the RPM Black Mock Through-the-Body Side Exhaust Tips for 1/10 Scale Vehicles. This set comes with two complete tips, one for each side of the vehicle.Details. They're what set a custom...

This is a set of RPM Pillow Ball Screw Caps (4) for use with the RPM Carriers on the Traxxas T-Maxx and E-Maxx trucks. Until now, the only way to replace damaged or worn out pivot ball setscrews and...

This is the RPM Black Front & Rear Upper Chassis & Differential Covers for the LaTrax Teton & Rally RPM Front & Rear Upper Chassis and Differential Covers for the LaTrax Teton and...

This is the RPM Blue Front & Rear Upper Chassis & Differential Covers for the LaTrax Teton & Rally RPM Front & Rear Upper Chassis and Differential Covers for the LaTrax Teton and...

This is the RPM Red Axle Carriers for the Traxxas 1/16 E-Revo, 1/16 Slash, and 1/16 Summit. This fits brushed and VXL brushless versions.There is very little that can be as frustrating on an R/C...