Traxxas

These are the Traxxas TRX-4 Crawler GTS Shock Caps, Spring Retainers, and Hollow Balls.Includes2 Upper Caps2 Bottom Caps2 Upper Retainers2 Lower Retainers4 Hollow BallsStock Replacement ForTRX-4...

This is the Traxxas X-Maxx Blue Aluminum Motor Mount Washer and Screw Set. Specially engineered aluminum washers add additional strength and good looks to the motor mounts in the X-Maxx chassis...

These are the Traxxas X-Maxx Steering Bellcranks and Servo Saver.FeaturesMolded composite plastic constructionSteel servo saver springIncludesTwo Steering BellcranksBellcrank SupportServo Saver ...

This is the Traxxas X-Maxx Front and Rear Skidplate Set with Rubber Impact Cushions.FeaturesMolded composite plastic constructionReduces damage to underside of chassis and other components during ...

This is the Traxxas Stub axles, front, heavy duty (2)/ yokes (2)/ pins (4). This is Traxxas part number 6854XPart Number: 6854X / TRA6854XFits1/10 RallySlash 4x4 (low-CG)Slash 4x4 (standard...

This is the Traxxas Tires & wheels, assembled, glued (split-spoke, black chrome wheels, slick tires (S1 compound), foam inserts) (rear) (2). This is Traxxas part number 6477 Specially developed...

This is the Traxxas Differential Housing and Pinion Collar Set for the E-Maxx, E-Maxx Brushless, and T-Maxx 3.3 trucks.Includes: Left and Right Differential Housings and Pinion Collar...

These are the Traxxas 3x20mm Buttonhead Hex Machine Screws. Each package includes six screws. These are used in many different Traxxas vehicles.Replacement part forBandit VXLDrag Slash 1967 Chevrolet...

This is the replacement Traxxas 2.4GHz TQ Link Transmitter Antenna.

These are Traxxas Wheel Hub Ball Bearings for the Revo, T-Maxx 3.3, E-Maxx, and other vehicles. Pair of 12x18x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out for...

This is the Traxxas Updated Wire Harness for the EZ Start and EZ Start 2 Systems. This harness has the white connector that the EZ Start pack plugs into. Features: Extra long 12" wires Pre-installed...

This is a set of optional 30 Degree Red Caster Blocks for the Traxxas Rustler, Stampede, and Slash 2WD FEATURES Anodized aluminum construction Red in color 30 degree INCLUDESOne left and...

These are the Rear Red Assembled Tires and Wheels from Traxxas FEATURES Rubber construction, SCT off-road design 5 spoke satin chrome wheels Red beadlock Dual profile INCLUDESTwo Rear Assembled...

This is the Receiver Box for the Traxxas Slash and E-Revo Trucks. FEATURES:Replaces damaged receiver boxesConstructed of black plastic INCLUDES:One top and bottom half receiver box for the Traxxas...

This is a set of four Traxxas Blue Aluminum 17mm Splined Wheel Nuts for the vehicles using the 17mm wheel hubs. Some of the vehicles are the Revo 3.3, E-Revo Brushless, T-Maxx 3.3, E-Maxx...

This is the Stock Replacement Bumber Mount Set for the Traxxas T/E Maxx trucks. These mounts attach the bumpers to the bulkheads. FEATURES:Black nylon construction INCLUDES:One L&R Front Bumper...

This is a pair of Traxxas Steel Center Driveshafts for the Traxxas T-Maxx 3.3 model 4909 with Opti-Drive Transmission.This WILL NOT FIT model 4907 or 4908 versions of the T-Maxx 3.3...

These are the Traxxas Red Aluminum Rear Stub Axle Carriers with Bearings for the Traxxas Slash 2WD, Rustler, Stampede 2WD, and Bandit vehicles. These fit XL-5 and VXL versions of those vehicles...

This is a set of Traxxas Rod ends (12)/ hollow balls (12) Set of twelve rod ends come assembled with hollow balls. Replacement Part ForDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5...

This is a set of two Traxxas Talon Tires and foam inserts for the Traxxas Revo and T-Maxx 3.3 rims (3.8").  These tires will fit all of the 3.8" wheels from...

This is a Traxxas Revo Red Aluminum Pushrod Set (2 rods) with rod ends for use with Progressive 3 Rockers (part TRA5359). The pushrods are 112mm in length.  These pushrods are strong,...

This is the Traxxas Completed Long Arm Lift Kit for the TRX-4M The TRX-4M Long Arm Lift Kit raises your TRX-4M's center ground clearance over 35% when combined with Mickey Thompson Baja Pro XS 2.4x1...

This is the Traxxas TRX-4m Stainless Steel Chassis Skidplate Give your TRX-4M ultimate protection against rocks and scrapes. Made from stainless steel, the skid plate protects the chassis from damage...

This is the Traxxas TRX-4m Stainless Steel Axle Skidplate (Front or Rear) (2) Give your TRX-4M ultimate protection against rocks and scrapes. Made from stainless steel, these skid plates protect the...

This is the Traxxas Driveshaft, center, 6061-T6 aluminum (blue-anodized). This is Traxxas part number 6755Part Number: 6755 / TRA6755FitsStampede 4x4 VXLStampede 4x4 XL-5TellurideMore detail coming...

This is the Traxxas Rustler 4x4 Center 6061-T6 Blue Aluminum Driveshaft (189mm). This is the stock replacement on the VXL brushless version, but can also be used as an upgraded for the brushed truck...

This is the Traxxas E-Revo 2 Motor Mount Hinge Post and Screws.Stock Replacement OnE-Revo 2.0

This is the Traxxas Unlimited Desert Racer Rear Planetary Sun Gear.Stock Replacement OnUnlimited Desert Racer (UDR)

This is the Traxxas Black 2017 Ford Raptor Slash Body with Decals. Front grill and mirrors are sold separately.Accessory Part ForSlash 2WD Ford RaptorSlash 2WD XL-5Slash 2WD VXL

This is the Traxxas 4-Tec 2.0 Spool Housing, Shaft, and Bushing. This fits all 4-Tec 2.0 cars, including the Ford GT and Mustang GT. Replacement Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD...

These are the Traxxas TRX-4 Scale Crawler Canyon 1.9 Trail Tires and Foam Inserts (S1 Compound). Canyon Trail 1.9″ x 4.6″ tires feature deep tread blocks for maximum traction on rough...

This is the Traxxas TRX-4 Crawler Portal Drive Output Gear (front or rear).FitsTRX-4

This is the Traxxas X-Maxx 16-Tooth Pinion Gear with 1.0 Mod Pitch and a 5mm Shaft Bore.  16-tooth pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw. Traxxas pinion...

This is a pair of Traxxas X-Maxx Wheel Hex Hubs with Hex Clips.FeaturesMolded composite plastic constructionIncludesTwo Hex Wheel HubsTwo Steel ClipsSpecificationsHex Size: 0.94" (24mm)Thickness: 0...

This is the Traxxas Spring, shock (GTR) (2.925 rate, blue) (1 pair). This is Traxxas part number 7245Part Number: 7245 / TRA7245Fits1/16 SummitMore detail coming soon! Please check your vehicle...

This is the Traxxas Caps and spring retainers, GTR shock (upper cap (2)/ hollow balls (4)/ bottom cap (2)/ upper retainer (2)/ lower retainer (2)). This is Traxxas part number 7065Part Number: 7065...

This is the Traxxas Hollow balls, steel (machined). This is Traxxas part number 7028XPart Number: 7028X / TRA7028XFits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang...

This is a pair of Traxxas 2.8" Black Chrome All-Star Wheels for the Rear of the electric Rustler and Stampede 2WD trucks. These have a 12mm hex hub.SpecificationsOverall Diameter: 2.8" (71mm)Width:...

This is the Traxxas aluminum (Green Anodized Shock Caps Shock caps, aluminum (green-anodized) (4) (fits all Ultra Shocks)Aluminum shock caps are great way to boost the durability and style of any...

This is a pair of Traxxas Green 6061-T6 Aluminum Steering Blocks with Bearings for the Slash 2WD, Stampede 2WD, Rustler, Bandit, Nitro Slash vehicles.Features6061-T6 Aluminum ConstructionGreen...