Traxxas

This is the Traxxas TRX-4 Long Arm Lift Kit Red Powder Coated Steel Steering Link (5x117mm), Draglink (5x60mm), and Panhard Link (5x63mm) assembled with hollow balls. This set is designed only for...

This is the Traxxas E-Revo 2 Differential Gear Set. Each set includes 4 spider gears and 2 spider gear shafts.Stock Replacement OnE-Revo 2.0

This is a full set of Traxxas 4-Tec 2.0 Front and Rear Drift Tires Pre-Mounted on Split-Spoke Black Chrome Wheels. These drift tires will open up your 4-Tec 2.0 to a whole new R/C world. Test your...

This is the Traxxas Ford Bronco Painted Body Complete with Bumpers and both Sunset and Red Decal Color Options. The body includes front and rear bumpers, push bar, rear body mount, grill, side...

This is the Traxxas 4-Tec 2.0 Blue Aluminum Center Driveshaft. This works with all versions of the 4-Tec 2.0, including the Ford GT and Mustang GT.Fits4-Tec 2.0

This is a pair of Traxxas Paddle Tires Pre-Mounted on Black Chrome 2.8" Wheels for the rear of Stampede 2WD trucks. Add these to your truck for better grip in sand, snow, and mud!FitsBigfoot &...

This is the Traxxas X-Maxx 8S 51-Tooth Metal Output Gear. This is used with the 7785X input gear Metal 51-tooth output gear. Requires: 7785X metal input gear. Replacement Part ForX-MaxxXRT

This is the Traxxas X-Maxx Red Aluminum Motor Mount Washer and Screw Set. Specially engineered aluminum washers add additional strength and good looks to the motor mounts in the X-Maxx chassis...

This is the Traxxas BFGoodrich Mud-Terrain Tires on SCT Split Spoke Chrome Red Beadlock Wheels for 4WD F/R, 2WD Rear Pair of BFGoodrich Mud-Terrain T/A KM2 tires come pre-glued and mounted with foam...

This is the Traxxas Rebuild kit, steel-splined constant-velocity driveshafts (includes pins, dustboots, lube, and hardware).  Rebuild your Traxxas steel CV driveshafts with this kit. Each kit...

This is the Traxxas Chrome Front Bumper and Hardware for the Revo, 1/10 E-Revo, and 1/10 Summit trucks.IncludesBumper and MountTwo 4x10mm Button Head Cap ScrewsTwo 3x25mm Button Head Cap...

These are the Traxxas Big Bore Shock Upper and Lower Spring Retainers and 5 different thicknesses of spring pre-load spacers, from 1mm to 8mm. Replacement Big Bore Shock retainer set features upper...

This is the 45T Spur Gear for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles.FeaturesNylon constructionBlack in colorSpecificationsOuter Diameter: 24.75mm (0.97")Inner Diameter: 5.5mm (0...

This is the Wire Retainer/Gear Cover for use with many Traxxas vehicles using the TQi telemetry system, including the Bandit, E-Maxx, Rustler, Slash 2WD, Stampede 2WD, Stampede 4x4, and X-Maxx...

These are Traxxas 3x30mm Button Head Screws (6). Features: Steel construction Black in color Button head design Includes: Six 3x30mm button head screws Specifications:Length: 1-3/16"...

This is a Complete Control Box for the Easy Start 2 on the Traxxas Tmaxx. This houses the 7.2V battery for the Easy Start, and provides the start button. Also for the Tmaxx 3.3...

This is a stock replacement FRONT shock tower. SPECS:Height: 2 3/4"Thickness: 1/4"Width at base: 2 3/4"Width at top: 2" INCLUDES:(1) Front shock tower Replacement Part ForBandit VXLBanditBIGFOOT No...

This is the Traxxas 58mm Camber Links, Turnbuckles (Assembled with Rod Ends and Hollow Balls) (2) 58 mm camber links come assembled with rod ends and hollow balls. Replacement Part ForFord F-150...

This is the Aluminum Engine Mount for the Traxxas 3.3 T-Maxx. FEATURES:Replaces damaged engine mounts INCLUDES:Engine mount, eight 3x10mm socket head screws, eight flat washers and eight lock...

These are the BellCrank Bushings for the Traxxas Nitro Jato Stadium Truck. FEATURES:Nylon constructionWhite in color INCLUDES:Four 4mm x 7mm x 2.5mm White Plastic Bushings REQUIRES:Assembly onto...

This is a Two-Speed Close Ratio Gear Set for the Traxxas Revo transmission. These parts are located in the center transmission. FEATURES:White plastic construction INCLUDES:One 40T 2nd speed gearOne...

This is a set of replacement Traxxas Front Left Upper and Lower Suspension Arm Set  for the Revo 2.5 and 3.3 trucks.  If you need the right side as well, search our...

This is a pair of Traxxas 5x10x4mm ball bearings.  These are used in the clutch bells of many of the Traxxas vehicles. FeaturesThe bearings are constructed of stainless steel Includes2-...

This is the Traxxas 6061-T6 Aluminum (Green-Anodized) Bellcrank Steering Assembly Aluminum Bellcrank AssemblyEnhance the steering precision, strength, and looks of your Maxx Slash with this aluminum...

This is the Traxxas 6061-T6 Aluminum (Gray-Anodized) Bellcrank Steering Assembly Aluminum Bellcrank AssemblyEnhance the steering precision, strength, and looks of your Maxx Slash with this aluminum...

This is the Traxxas 6061-T6 Aluminum (Red-Anodized) Bellcrank Steering Assembly Aluminum Bellcrank AssemblyEnhance the steering precision, strength, and looks of your Maxx Slash with this aluminum...

This is the Traxxas 6061-T6 Aluminum (Orange-Anodized) Bellcrank Steering Assembly Aluminum Bellcrank AssemblyEnhance the steering precision, strength, and looks of your Maxx Slash with this aluminum...

This is the Traxxas 6061-T6 Aluminum (Green-Anodized) Steering Servo Horn Increase the precision and durability of your Maxx Slash with this aluminum servo horn. Machined from tough 6061-T6 aluminum,...

This is the Traxxas 6061-T6 Aluminum (Red-Anodized) Steering Servo Horn Increase the precision and durability of your Maxx Slash with this aluminum servo horn. Machined from tough 6061-T6 aluminum,...

This is the Traxxas 6061-T6 Aluminum (Orange-Anodized) Steering Servo Horn Increase the precision and durability of your Maxx Slash with this aluminum servo horn. Machined from tough 6061-T6...

This is the Traxxas 6061-T6 Aluminum (Gray-Anodized) Steering Servo Horn Increase the precision and durability of your Maxx Slash with this aluminum servo horn. Machined from tough 6061-T6 aluminum,...

This is the Traxxas 6061-T6 Aluminum (Blue-Anodized) Bellcrank Steering Assembly Aluminum Bellcrank AssemblyEnhance the steering precision, strength, and looks of your Maxx Slash with this aluminum...

This is the Traxxas 6061-T6 Aluminum (Blue-Anodized) Steering Servo Horn Increase the precision and durability of your Maxx Slash with this aluminum servo horn. Machined from tough 6061-T6 aluminum,...

This is a pack of Traxxas Black 90-Degree Angled Body Mounting Clips (10 clips).  The angled design helps make it easier to remove and install them from the body posts. These can be used as...

This is the Traxxas Cover, center driveshaft (clear). This is Traxxas part number 6841Part Number: 6841 / TRA6841FitsSlash 4x4 (standard chassis)Slash 4x4 PlatinumSlash 4x4 UltimateMore detail...

This is the Traxxas High-Voltage Power Amplifier for the Traxxas Unlimited Desert Racer trucks. This is used to supply power to the accessory LED light kit for the UDR. Replacement high-voltage power...

These are the Traxxas Black Heavy Duty Body Clips. These can be used on a wide variety of Traxxas cars and trucks.Accessory Part For1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 Ford Fiesta ST...

This is the Traxxas Curved Tip Heavy Duty Body Scissors for cutting and trimming polycarbonate RC bodies. To do a good job on a custom body, the right tools are a must. Having both a curved tip and...

This is the Traxxas Straight Tip Heavy Duty Body Scissors for cutting and trimming polycarbonate RC bodies. To do a good job on a custom body, the right tools are a must. Having both a straight tip...

This is the Traxxas Unlimited Desert Racer Planetary Ring Gear.Stock Replacement OnUnlimited Desert Racer (UDR)