Traxxas

These are the Traxxas TRX-4 Crawler Grey Bumper D-Rings and Mount Screws. This includes four D-rings and four 2.0x12mm screws.FitsTRX-4

These are the Traxxas 5x8x2.5mm Black Rubber Sealed Ball Bearings (2). Each package includes two bearings. These are used in the TRX-4 Crawlers. FitsTRX-4

These are the Traxxas 2.5x16mm Cap-Head Hex Machine Screws (6). Each package includes six screws.FitsTRX-4

This is the Traxxas Assembled Torque Biasing Center Drive with 17x26x5 Bearings (2). Replacement Torque-Biasing Center Drive comes complete and ready to install. Fits 7727X bulkheads...

This is a pair of Traxxas X-Maxx 8S-Rated Maxx AT Tires with Foam Inserts. Each package includes two tires and two foam inserts. Huge Maxx AT 8.0x4.0" tires offer ferocious grip with an...

This is the Traxxas Blue Aluminum Stub Axle.  Add a touch of style to your X-Maxx or XRT with these brightly-anodized aluminum stub axles.  For use with 8s-spec heavy duty driveshaft...

This is a pair of Traxxas X-Maxx GTX 1.346 Rate Springs. These come in packages of two springs. This is a firmer spring rate than stock.Features Steel construction Firmer than stock 1.055...

This is the Traxxas Aton Motor LED Lens (Green) - Left & Right. This is Traxxas part number 7964Part Number: 7964 / TRA7964FitsAtonAton PlusMore detail coming soon! Please check your vehicle manual...

This is the Traxxas Aton Front Left & Right LED Lens (Green). This is Traxxas part number 7954Part Number: 7954 / TRA7954FitsAtonAton PlusMore detail coming soon! Please check your vehicle manual to...

This is the Traxxas Aton Rotor Blade Set (2) (Orange) w/Screws. This is Traxxas part number 7930Part Number: 7930 / TRA7930FitsAtonAton PlusMore detail coming soon! Please check your vehicle manual...

This is the Traxxas Aton Canopy Roll Hoop (Green). This is Traxxas part number 7921Part Number: 7921 / TRA7921FitsAtonAton PlusMore detail coming soon! Please check your vehicle manual to confirm...

This is the Traxxas Front & Rear Driveshaft Assembly 6061-T6 Aluminum (Blue-Anodized) (2) Replace the standard composite driveshafts in your 1/18 scale LaTrax Prerunner or Teton with these...

This is the Traxxas Bumpers, front (1)/ rear (1). This is Traxxas part number 7135Part Number: 7135 / TRA7135Fits1/16 E-Revo Brushed1/16 E-Revo VXL BrushlessMore detail coming soon! Please check...

This is the Traxxas Spur gear, 55-tooth. This is Traxxas part number 7047R55-tooth spur gear (48-pitch) with telemetry magnet holder. Traxxas spur gears let you fine-tune the performance of your...

This is the Traxxas Motor mount, 6061-T6 aluminum (blue-anodized). The aluminum motor mount is precision-machined from solid 6061-T6 alloy for extra rigidity and total power transfer in high-power...

This is the Traxxas Caster blocks (c-hubs), 6061-T6 aluminum, left & right (red-anodized). Left and right red aluminum caster blocks improve the appearance, ruggedness, and control of your...

This is the Traxxas Stub axle, front, steel-splined constant-velocity (1)Replacement front stub axle for Traxxas steel CV driveshafts (6851R)Accessory Part ForHoss 4X4 VXLRustler 4X4 VXLRustler...

This is the Traxxas Gear, 29-T pinion (1.0 metric pitch, 20° pressure angle) (fits 5mm shaft)/ set screw. This is Traxxas part number 6492Part Number: 6492 / TRA6492FitsXO-1More detail coming soon!...

This is the Traxxas Splitter extension (universal)/ 3x10mm CC (2). This is Traxxas part number 6432Part Number: 6432 / TRA6432FitsXO-1More detail coming soon! Please check your vehicle manual to...

This is the Traxxas Splitter mount. This is Traxxas part number 6431Part Number: 6431 / TRA6431FitsXO-1More detail coming soon! Please check your vehicle manual to confirm vehicle fitment, or...

This is a pair of Traxxas 1/10 Summit Red GTR Shock 4.9 Rate Double Yellow Stripe Springs.FeaturesSteel construction, red in color4.9 damping rate with double yellow stripe markingIncludes: Two Long...

These are the Traxxas Battery Compartment Vents for 1/10 E-Revo and Summit trucks.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 Summit

This is the Traxxas OptiDrive Sensor Assembly for Revo 3.3, T-Maxx 2.5R, and T-Maxx 3.3 trucks equipped with OptiDrive. This part senses the motion of the transmission for forward/reverse shifting...

This is the Traxxas Aluminum Hollow Ball Set for the Revo 3.3, 1/10 E-Revo, 1/10 Summit, Jato, and Slayer trucks. Every ounce matters! Save weight with these aluminum upgrades!Features Aluminum...

This is the Traxxas 15-Tooth 1.0 Mod Clutch bell with 5x8x0.5mm Fiber Washer and 5mm E-Clip. This clutch bell requires using 5x11x4mm ball bearings.FeaturesVented clutch bellOne piece bell...

This is the Traxxas replacement Transmission Gearbox Halves for the T-Maxx 2.5R and 3.3 trucks. This set includes the two gearbox halves and rubber access plug.Features Holds all gears including the...

This is a pair of Traxxas 5x10x4mm Blue Rubber-Sealed Ball Bearings. These are used on vehicles like the 1/10 E-Revo, Revo 3.3, T-Maxx, Slayer, as well as other vehicles.FeaturesMetal bearing...

These are the Traxxas 4x20mm Button-Head Hex Drive Machine Screws. Each package includes six screws. 4x20 mm button-head machine screws with hex drive heads. Set of six.Replacement part for these...

These are the Traxxas 3x15mm Cap-Head Hex Machine Screws. Each package includes six screws. These are used as head bolts on TRX 2.5 engines, and also on other areas of many vehicles.Replacement part...

These are the Traxxas 3x30mm Roundhead Machine Screws. Each package includes six screws. These are for vehicles based on the Stampede XL-5 2WD, including the Stampede, Skully, and Craniac.Fits1/10...

This is a pair of Traxxas Front Suspension Arms for the Bandit, Nitro Rustler, and Nitro Stampede.SpecificationsLength: 3"Width: 1.2"FitsBandit VXLBandit XL-5Nitro RustlerNitro SportNitro Stampede

This is a pair of Traxxas 78mm Turnbuckles.These can be used on:1/10 Monster Jam TrucksCraniacNitro SportRustler XL-5SkullyStampede XL-5 2WD

This is the Traxxas Slipper Tension Spring with Spur Gear Bushing and Locknut.Includes:Slipper tension spring (1)Spur gear bushing (1)4mm Locknut with nylon insert (1) FitsBandit XL-5E-MaxxNitro...

This is the Traxxas Blue Aluminum 17mm Wheel Hex Hub Set Traxxas' 17mm Hex Adapters make it easy to install a wide range of wheel and tire combinations on your Traxxas vehicle. Installation is simple...

This is the Traxxas Receiver Box Seal Kit for Slash 2WD, E-Revo, and Summit trucksIncludesSilicone rectangle shaped O-ringSilicone greaseTwo sections of foam rubberInstruction sheetFits1/10 E-Revo...

These are the Traxxas Maxx Tires with Foam Inserts for 3.8" T-Maxx/E-Maxx/Revo Wheels. These will fit 3.8" wheels with the Traxxas bead.Outside Diameter: 6.3"Includes: Two tires with foam...

This is a pair of Traxxas GTR Shock Springs (Long .810 Pink) for 1/10 Slash Ultimate & Platinum trucks with GTR shocks. Shock springs for 1/10 scale long GTR shocks use high-quality spring steel...

This is a pair of Traxxas GTR Shock Springs (XX-Long .711 Orange) for 1/10 Slash Ultimate & Platinum trucks with GTR shocks. Shock springs for 1/10 scale XX-long GTR shocks use high-quality...

This is the Traxxas Blue Aluminum Rear Shock Tower for the Slash 4x4, 1/10 Rally, Stampede 4x4, and Telluride trucks. Made of precision-machined 7075-T6 aluminum and anodized blue, these look great...

This is a Traxxas Rear Shock Tower for the Slash 4x4 and Stampede 4x4 trucks.FEATURES:Hardened plastic constructionBlack in colorINCLUDES: One rear shock towerREQUIRES: Installation on...