Traxxas

This is the Traxxas Driveshaft Rebuild Kit for the Revo, T-Maxx 3.3, and E-Maxx vehicles that have been upgraded with the aftermarket Traxxas steel driveshaft set (part TRA5451R). These are...

This is the Traxxas Bellcrank Bushing set for the Nitro Rustler, T-Maxx .15, 2.5, 3.3, Slayer, and other vehicles.

These are the Traxxas Left and Right Axle Carriers for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles. Features: Nylon construction Black in color Includes:One Left Axle CarrierOne Right...

This is the Traxxas Front and Rear Skidplate for the Slash. This skidplate bolts to the chassis and the bulkheads and provides protection to the front differential. Features: Skidplate is...

This is a set of Traxxas Axle Carriers and Steering Blocks for the Traxxas Revo, T-Maxx 3.3, and E-Maxx 3905. The axle carriers and steering blocks support the stub axles and bolt to the upper...

This is a Traxxas Shock Tower for the all versions of the T-Maxx and E-Maxx. This is for use with rectangular body posts. Features: Plastic construction Includes:(1) Shock...

This is a pair of replacement Toe Links for the Traxxas Revo Truck.  These adjust the position of the toe on the vehicle. FEATURES Steel turnbuckle design 5.0mm diameter INCLUDESTwo...

These are the Rear Turnbuckles/Toe Links for the Traxxas 3.3 T-Maxx & E-Maxx X FEATURES Constructed of steel, polished natural finish INCLUDESTwo Rear Turnbuckles/Toe Links for the Traxxas...

These are the Front Turnbuckles/Toe Links for the Traxxas 3.3 T-Maxx FEATURES Constructed of steel, polished natural finish INCLUDESTwo Front Turnbuckles/Toe Links for the Traxxas 3.3...

These are the Steering Servo Horns and Turnbuckles from Traxxas. FEATURES:Nylon construction, black in color INCLUDES:Two long steering servo hornsTwo short steering servo hornsTwo 3x20mm...

This is the Traxxas #3652 Rear Stub Axle Carrier that comes included with the Bandit XL-5, Rustler XL-5, and Stampede 2WD XL-5 trucks that use bushings instead of bearings. If your truck has...

This is the Battery Box for the Traxxas T-Maxx 4WD Radio Control Monster Truck. This battery box mounts to the chassis and protects the battery pack from dirt and moisture. Fits both old and new...

These are Aluminum Hex Wheel Hubs for the T-Maxx and E-Maxx Truck Kits. FEATURES:Blue anodized.Machined 6061 T-6 aluminum construction.Packaged in foam, on a bubble sealed header card. INCLUDES:Four...

These are hardened steel drive yokes for the Traxxas Rustler and Stampede. FEATURES:Hardened steel construction and is stronger than stock parts.These yokes also come with U-Joints pre-installed for...

This is the is a pair of Traxxas Steering Blocks for Bandit XL-5 buggies. They are made of black reinforced nylon and are what the front axles go through.PACKAGE INCLUDES: Two steering blocks (one...

This is a pair of 2.8" Twin-Spoke Rear Wheels for the Traxxas Jato 2.5 and 3.3 trucks.  These are stock replacement wheels.FEATURES: Nylon constructionChrome platedFive split spoke wheel...

This is a Traxxas Jato 2.5 and 3.3 Fuel Tank Cap, Pull Ring, and Fuel Line Pinch Clip.

This is a Traxxas Jato 2.5 and 3.3 Stock Replacement Front Shock Tower.

This is a set of two (2) Traxxas Jato Rear GTR Shock Springs with the 1.6 Blue Weight Rating.

This is a pair of 5.9 rate (blue) Shock Springs for the Traxxas Revo. FEATURES:Red in color (small blue square indicates spring type)Metal construction INCLUDES:2 springs REQUIRES:Installation on the...

This is a 4.9 Silver (light) Rate Shock Spring for the Traxxas Revo. FEATURES:Steel constructionPainted red w/small silver stripe4.9 tension rate (Light) INCLUDES:Two Shock Springs REQUIRES:Assembly...

This is the Fuel Tank Rebuilt Kit for the REVO from Traxxas. FEATURES:Rubber, slicone, plastic, & nylon construction INCLUDES:Mounting post (1)Grommets (2)Tank gaurd (1)Mounting clips (2)O-ring...

This is a Traxxas Progressive 1 Rocker Arm Set for the Revo 2.5 and 3.3 trucks.  These fit TRA5318 and TRA5318X pushrods.  If you need the pushrods too, search...

This is the Clutch Bell with Washer and E-Clip for the Traxxas Revo. FEATURES:Metal constructionFive cooling holes on the face of bell (bellow the teeth) INCLUDES:One clutch bellTwo teflon washerTwo...

This is a Traxxas T-Maxx Brake Pad Set for the T-Maxx .15 and 2.5 trucks.  These are stock replacements.  These brake pads fit on each side of the brake disc and bolt to the rear of the...

This is the Traxxas Spartan SR Rudder Mount with Steering Arm and Drive Strut Mount Replacement rudder mount includes steering arm, drive strut mount, and stainless hardware Replacement Part...

This is the Traxxas Spartan SR Rudder Pushrod with Servo Horn Replacement rudder pushrod with servo horn and stainless 3x22 mm screw and 3x15 mm screw Replacement Part ForSpartan SR

This is the Traxxas TRX-4MT Left & Right Chassis Rails 220mm (Steel) Left and right steel frame rails for TRX-4MT monster trucks Replacement Part ForTRX-4MT 1/18 1979 Chevrolet K10 Monster...

This is the Traxxas Spartan SR Telemetry Expander Mount Use the telemetry expander mount to secure the optional TQi Telemetry Expander to your Spartan SR. Accessory Part ForSpartan SR

This is the Traxxas Sway Bar Mounts (Front and Rear) for the #10295 Sway Bar Kit Replacement sway bar mounts for the 10295 sway bar kit Includes(4) 3x6mm FCS Accessory Part ForMaxx Slash

This is the Traxxas Sway Bar Links (Front or Rear) for the #10295 Sway Bar Kit Replacement sway bar links for the 10295 sway bar kit Accessory Part ForMaxx Slash

This is the Traxxas Maxx Slash Sway Bar Set Replacement sway bars for the 10295 sway bar kit. Includes(1) Each of all 5 Sway Bars Accessory Part ForMaxx Slash

This is the Traxxas Natural Finish GT-Maxx Shock (1.569 Rate) Springs (85mm) (2) GT-Maxx shock springs (85 mm) allow you to compensate for lighter or heavier vehicle configurations. The higher the...

This is the Traxxas Natural Finish GT-Maxx Shock (1.671 Rate) Springs (85mm) (2) GT-Maxx shock springs (85 mm) allow you to compensate for lighter or heavier vehicle configurations. The higher the...

This is the Traxxas TRX-6 Ultimate RC Hauler LED Light Set  LED light set for the #8823 TRX-6 Ultimate RC Hauler body IncludesHeadlightsRoof Lights Replacement Part ForTRX-6 Ultimate RC Hauler

This is the Traxxas TRX-6 Ultimate RC Hauler Clear Body From mild to wild, Traxxas clear bodies are your own personal canvas. You choose the color and design and Traxxas ProGraphix paint makes it...

This is the Traxxas 370 Motor (Assembled with Bullet Connectors) Replacement 23-turn brushed 370-size LaTrax motor with bullet connectors Replacement Part For1/18 LaTrax Desert Prerunner1/18 LaTrax...

This is the Traxxas Front/Rear Axle Shafts Front Stub Axles Give your TRX-4M the ultimate drivetrain upgrade with the heavy-duty axle set. Made from high-grade hardened steel, the heavy-duty axle set...

This is the Traxxas Constant-Velocity Driveshaft Rebuild Kit (includes pins for 2 driveshaft assemblies) (for front driveshafts or #9751 metal center driveshafts) The CV driveshaft rebuild kit...

This is the Traxxas Front Hardened Steel Front Stub Axle The heavy-duty front stub axle is made from high-grade hardened steel for maximum strength and durability. Sold individually. (Shaft is a...