Traxxas

This is a pair of Traxxas 15x24x5mm Blue Rubber-Sealed Ball Bearings. These are used on the Traxxas X-Maxx trucks.Features Steel construction with blue rubber seals Used in the front and rear...

This is a set of Traxxas 3x30mm Cap-Head Shoulder Screws and Draglink Shoulder Screws for the Bandit, Nitro Slash, Rustler XL-5, and Slash 2WD XL-5 trucks.Includes:(2) 3x30mm Bellcrank Screws(2)...

These are the Traxxas 3x20mm Roundhead Machine Screws. Each package includes six screws.Fits1/10 Monster Jam TrucksBandit XL-5CraniacNitro SlashSkullyStampede XL-5 2WD

This is a pair of Traxxas Tracer 2.2" Black Chrome Rear Wheels for the Traxxas Bandit XL-5 and VXL buggies. These wheels have a slot in the hub to slide over the axle pin.FEATURES:Black Chrome...

These are Traxxas 4x8x3mm Sealed Ball Bearings (2). These are used in 1/16 vehicles such as the E-Revo and Slash, as well as many other Traxxas vehicles. Features:Blue rubber sealedMay also be used...

This is the Temperature and Voltage Sensor for the XO-1 On-Road Car from TraxxasFeaturesFunctions with the Traxxas TQi Link system to display battery voltage and temperature.IncludesTemperature and...

These are the Traxxas Front and Rear Toe Links for use on the 1/16 Slash and E-Revo vehicles. Features: Nylon construction Red in color Includes:Two Front and two Rear Toe LinksEight Hollow...

These are the Traxxas Pushrods for use on the 1/16 Slash VXL 4WD. Features: Nylon construction Red in color Includes:Four PushrodsEight Hollow Balls Specifications:Length: 55mm (2.2")Diameter: 5.2mm...

These are Traxxas 2.5x8mm Cap Head Screws (6). Features: Steel construction Black in color Cap head design Includes: (6) 2.5x8mm cap head screws Specifications:Length: 5/16" (8mm)Diameter: 3/32" (2...

This is the Traxxas 27mHz Two Channel AM Receiver without BEC. 2-channel 27MHz receiver without BEC (for use with electronic speed control) Features: Mounting tabs on either side insure secure...

This is the Carrier Differential for the Traxxas Revo and E-Maxx. FEATURES Replaces worn diff carriers gaskets and spacers INCLUDESDiff Carrier and GasketsSteel Spider Gear Braces (not used with...

This is a pair of Traxxas 2.8" Black Chrome All Star Wheels mounted with Talon Tires. Talon tires provide "just-right" grip and handling on a wide variety of surfaces. The tires come mounted with...

This is a Package of Replacement Cush-Drive Elements for the EZ Start 2 System. FEATURES:Black plastic construction INCLUDES:Four cush-drive elements REQUIRES:The remainder of the EZ Start 2 system...

This is the optional .8 Metric Pitch 65 Tooth Spur Gear for the Traxxas E-Maxx. FEATURES:Nylon construction, black in color.8 metric pitch INCLUDES:One 65T 0.8 metric pitch spur...

This is the Wing Mount for the Traxxas Revo 3.3 FEATURES:Nylon ConstructionBlack in Color INCLUDES:Two Wing SupportsOne Wing MountFour 4mm x 8mm Cap Head Socket ScrewsFour 3mm x 12mm Cap Head Socket...

This is a Traxxas Jato 2.5 and 3.3 Complete Fuel Tank Assembly.  This direct replacement tank features clear nylon construction with spring loaded lid, pre-installed pressure fittings, and the...

This is a Traxxas Jato 2.5 and 3.3 E-Z Start Wiring Harness.  This is a direct replacement part.

This is the Traxxas Front, Mid-Front, and Rear Skid Plate set for the Revo 3.3, 1/10 E-Revo, and Slayer trucks.IncludesFront, mid-front, and rear skid plates(8) 3X10mm button head screws(1) 3X30mm...

This is the Traxxas Front Bulkhead for the Revo and Slayer. Features: Black plastic construction Rocker shafts preinstalled Includes:Front bulkhead halves(2) rocker shafts(4) 4X14mm button...

This is a pair of Traxxas Steel Pushrods with installed rod ends for use with Progressive 1 Rockers or long travel rockers. If you need the rockers too, search our store for TRA5357. If you would...

This is a Traxxas TRX 2.5 and 2.5R Piston and Sleeve kit.  If you have several gallons of fuel through your engine, it may be time for a new piston and sleeve.  It is a...

This is the Stock Replacement Diff Gear Set for the Traxxas T/E Maxx.  These gears can also be referredto as bevel gears. FEATURES:Durable steel construction INCLUDES:Two 13 Tooth Output Gear...

This is the Front Skidplate for the Traxxas T-Maxx Monster Truck. This skidplate bolts to the Chassis (key #4922) and the Bulkheads key #4930 and provides protection to the front differential...

This is the Traxxas Spartan/Spartan SR Bow eye Replacement hull bow eye Replacement Part ForSpartan SRSpartan

This is the Traxxas Hatch Nut/Mounting Set Replacement hatch nut set includes four standard hatch nuts and four wingnuts along with (4) O-rings and (4) Stainless 3x8 mm screws Replacement Part...

This is the Traxxas Hatch Mounts (4) Set of four replacement hatch mounts with 3x8 mm stainless screws (9) Replacement Part ForDisruptorSpartan SR

This is the Traxxas TRX-4MT Center Skidplate Replacement TRX-4MT center skid plate Replacement Part ForTRX-4MT 1/18 1979 Chevrolet K10 Monster TruckTRX-4MT 1/18 1979 Ford F-150 Monster Truck

This is the Traxxas Servo Saver Bellcrank Bushing for the #10246-Series Bellcrank Set Replacement servo saver bellcrank bushing for the 10246-series aluminum bellcrank set Accessory Part ForMaxx...

This is the Traxxas Front Bulkhead (Black) Replacement black front bulkhead Replacement Part ForBIGFOOT No. 1 Officially Licensed ReplicaFord F-150 Raptor Accessory Part ForBanditRustler...

This is the Traxxas Front Bulkhead (Gray) Replacement gray front bulkhead Replacement Part ForBanditRustler BrushlessRustlerSlash Brushless EHDSlash Brushless Unassembled KitStampede...

This is the Traxxas Front Bulkhead (Black) Replacement black composite front bulkhead Replacement Part ForBIGFOOT No. 1 Officially Licensed ReplicaBigfoot Officially Licensed ReplicaDrag Slash 1967...

This is the Traxxas Telemetry Trigger Magnet Holder with Magnet The telemetry trigger magnet holder secures the magnet to the motor coupler to provide RPM data for the optional RPM sensor. Includes:...

This is the Replacement EZ-Start 2 Housing Set with Hardware and Motor Bushing. Includes(5) 3x12 mm screws (1) 3x20 mm screwMotor Bushing Replacement Part ForJatoNitro RustlerNitro SlashRevoSlayer...

This is the Traxxas Assembled Tuned Pipe Tuned pipe comes assembled and ready to install on Nitro Rustler, Nitro Sport, and Nitro 4-Tec with TRX 2.5 engine. *For TRX 2.5 - Requires Coupler Part...

This is the Traxxas Sledge Chassis Skid Plate (Gray) Protect Sledge's aluminum chassis from scrapes and damage with this tough composite skid plate. Available in several bright colors, the heavy-duty...

This is the Traxxas Sledge Chassis Skid Plate (Red) Protect Sledge's aluminum chassis from scrapes and damage with this tough composite skid plate. Available in several bright colors, the heavy-duty...

This is the Traxxas Sledge Chassis Skid Plate (Orange) Protect Sledge's aluminum chassis from scrapes and damage with this tough composite skid plate. Available in several bright colors, the...

This is the Traxxas Sledge Chassis Skid Plate (Graphite Gray) Protect Sledge's aluminum chassis from scrapes and damage with this tough composite skid plate. Available in several bright colors, the...

This is the Traxxas Sledge Chassis Skid Plate (Blue) Protect Sledge's aluminum chassis from scrapes and damage with this tough composite skid plate. Available in several bright colors, the heavy-duty...

This is the Traxxas Sledge Chassis Skid Plate (Green) Protect Sledge's aluminum chassis from scrapes and damage with this tough composite skid plate. Available in several bright colors, the...